|
Hi All,
Just wondered if anyone else had seen issues with the Scheduler in the latest version of D3Pro? Upgraded and then did some work on an existing project and now if wont work - loads of errors on building the project around no driving source.
Any workarounds or anything? I have reported to TrueBlue.
Thanks
Dave
|
yes. call tb.
From: Crestron@... [mailto:Crestron@...] On Behalf
Of Dave
Sent: Monday, April 02, 2012 4:47 AM
To: Crestron@...
Subject: [Crestron] D3 Pro 3.0.31 Scheduler Broken?
Hi All,
Just wondered if anyone else had seen issues with the Scheduler in the
latest version of D3Pro? Upgraded and then did some work on an existing
project and now if wont work - loads of errors on building the project
around no driving source.
Any workarounds or anything? I have reported to TrueBlue.
Thanks
Dave
|
TB sent me a file called Event Scheduler Update v3.0.exe that was supposed to fix the error but doesn't seem to. I have a call back into them, but was this the file they sent you?
toggle quoted message
Show quoted text
--- In Crestron@..., "tres n3L" <tres@...> wrote:
yes. call tb.
From: Crestron@... [mailto:Crestron@...] On Behalf
Of Dave
Sent: Monday, April 02, 2012 4:47 AM
To: Crestron@...
Subject: [Crestron] D3 Pro 3.0.31 Scheduler Broken?
Hi All,
Just wondered if anyone else had seen issues with the Scheduler in the
latest version of D3Pro? Upgraded and then did some work on an existing
project and now if wont work - loads of errors on building the project
around no driving source.
Any workarounds or anything? I have reported to TrueBlue.
Thanks
Dave
[Non-text portions of this message have been removed]
|
I am hesistant to say what they told me. so I will just answer your question. I did not receive a file. I rolled back my database. From: Crestron@... [mailto:Crestron@...] On Behalf Of p00pb0t Sent: Monday, April 02, 2012 1:53 PM To: Crestron@... Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken? TB sent me a file called Event Scheduler Update v3.0.exe that was supposed to fix the error but doesn't seem to. I have a call back into them, but was this the file they sent you? --- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres n3L" <tres@...> wrote:
yes. call tb.
From: Crestron@... <mailto:Crestron%40yahoogroups.com>
[mailto:Crestron@... <mailto:Crestron%40yahoogroups.com> ] On Behalf Of Dave
Sent: Monday, April 02, 2012 4:47 AM
To: Crestron@... <mailto:Crestron%40yahoogroups.com>
Subject: [Crestron] D3 Pro 3.0.31 Scheduler Broken?
Hi All,
Just wondered if anyone else had seen issues with the Scheduler in the
latest version of D3Pro? Upgraded and then did some work on an existing
project and now if wont work - loads of errors on building the project
around no driving source.
Any workarounds or anything? I have reported to TrueBlue.
Thanks
Dave
|
Did they tell you it was unsupported but you could start from scratch
creating a new project in the newest d3 version and it would be fine.
That's what I was told by tb.
toggle quoted message
Show quoted text
On Apr 2, 2012, at 3:18 PM, tres n3L <tres@...> wrote: I am hesistant to say what they told me. so I will just answer your question. I did not receive a file. I rolled back my database. From: Crestron@... [mailto:Crestron@...] On Behalf Of p00pb0t Sent: Monday, April 02, 2012 1:53 PM To: Crestron@... Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken? TB sent me a file called Event Scheduler Update v3.0.exe that was supposed to fix the error but doesn't seem to. I have a call back into them, but was this the file they sent you? --- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres n3L" <tres@...> wrote:
yes. call tb.
From: Crestron@... <mailto:Crestron%40yahoogroups.com>
[mailto:Crestron@... <mailto:Crestron%40yahoogroups.com> ] On Behalf Of Dave
Sent: Monday, April 02, 2012 4:47 AM
To: Crestron@... <mailto:Crestron%40yahoogroups.com>
Subject: [Crestron] D3 Pro 3.0.31 Scheduler Broken?
Hi All,
Just wondered if anyone else had seen issues with the Scheduler in the
latest version of D3Pro? Upgraded and then did some work on an existing
project and now if wont work - loads of errors on building the project
around no driving source.
Any workarounds or anything? I have reported to TrueBlue.
Thanks
Dave
[Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
|
to hell with starting over, that is why i keep incremental backups of my client programs. guess i am rolling back as well.
toggle quoted message
Show quoted text
--- In Crestron@..., Nick Mitchell <nick@...> wrote:
Did they tell you it was unsupported but you could start from scratch
creating a new project in the newest d3 version and it would be fine.
That's what I was told by tb.
Sent from my iPhone
On Apr 2, 2012, at 3:18 PM, tres n3L <tres@...> wrote:
I am hesistant to say what they told me. so I will just answer your
question. I did not receive a file. I rolled back my database.
From: Crestron@... [mailto:Crestron@...] On Behalf
Of p00pb0t
Sent: Monday, April 02, 2012 1:53 PM
To: Crestron@...
Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken?
TB sent me a file called Event Scheduler Update v3.0.exe that was supposed
to fix the error but doesn't seem to. I have a call back into them, but was
this the file they sent you?
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres
n3L" <tres@> wrote:
yes. call tb.
From: Crestron@... <mailto:Crestron%40yahoogroups.com>
[mailto:Crestron@... <mailto:Crestron%40yahoogroups.com> ] On
Behalf
Of Dave
Sent: Monday, April 02, 2012 4:47 AM
To: Crestron@... <mailto:Crestron%40yahoogroups.com>
Subject: [Crestron] D3 Pro 3.0.31 Scheduler Broken?
Hi All,
Just wondered if anyone else had seen issues with the Scheduler in the
latest version of D3Pro? Upgraded and then did some work on an existing
project and now if wont work - loads of errors on building the project
around no driving source.
Any workarounds or anything? I have reported to TrueBlue.
Thanks
Dave
[Non-text portions of this message have been removed]
|
no I was not told this.
toggle quoted message
Show quoted text
-----Original Message----- From: Crestron@... [mailto:Crestron@...] On Behalf Of Nick Mitchell Sent: Monday, April 02, 2012 3:33 PM To: Crestron@... Subject: Re: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken? Did they tell you it was unsupported but you could start from scratch creating a new project in the newest d3 version and it would be fine. That's what I was told by tb. On Apr 2, 2012, at 3:18 PM, tres n3L <tres@...> wrote: I am hesistant to say what they told me. so I will just answer your question. I did not receive a file. I rolled back my database. From: Crestron@... [mailto:Crestron@...] On Behalf Of p00pb0t Sent: Monday, April 02, 2012 1:53 PM To: Crestron@... Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken? TB sent me a file called Event Scheduler Update v3.0.exe that was supposed to fix the error but doesn't seem to. I have a call back into them, but was this the file they sent you? --- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres n3L" <tres@...> wrote:
yes. call tb.
From: Crestron@... <mailto:Crestron%40yahoogroups.com>
[mailto:Crestron@... <mailto:Crestron%40yahoogroups.com> ] On Behalf Of Dave
Sent: Monday, April 02, 2012 4:47 AM
To: Crestron@... <mailto:Crestron%40yahoogroups.com>
Subject: [Crestron] D3 Pro 3.0.31 Scheduler Broken?
Hi All,
Just wondered if anyone else had seen issues with the Scheduler in the
latest version of D3Pro? Upgraded and then did some work on an
existing project and now if wont work - loads of errors on building
the project around no driving source.
Any workarounds or anything? I have reported to TrueBlue.
Thanks
Dave
------------------------------------ * **** Check out the Files area for useful modules, documents, and drivers. A contact list of Crestron dealers and programmers can be found in the Database area. * ****Yahoo! Groups Links
|
Rolled back my database, it complained about the file having been open with a newer db but then compiled fine. Will be onsite tomorrow and can see if anything weird pops up. Bringing one of my previous backups just in case I need to move back one visit in time...
toggle quoted message
Show quoted text
--- In Crestron@..., "tres n3L" <tres@...> wrote:
I am hesistant to say what they told me. so I will just answer your
question. I did not receive a file. I rolled back my database.
From: Crestron@... [mailto:Crestron@...] On Behalf
Of p00pb0t
Sent: Monday, April 02, 2012 1:53 PM
To: Crestron@...
Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken?
TB sent me a file called Event Scheduler Update v3.0.exe that was supposed
to fix the error but doesn't seem to. I have a call back into them, but was
this the file they sent you?
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres
n3L" <tres@> wrote:
yes. call tb.
From: Crestron@... <mailto:Crestron%40yahoogroups.com>
[mailto:Crestron@... <mailto:Crestron%40yahoogroups.com> ] On
Behalf
Of Dave
Sent: Monday, April 02, 2012 4:47 AM
To: Crestron@... <mailto:Crestron%40yahoogroups.com>
Subject: [Crestron] D3 Pro 3.0.31 Scheduler Broken?
Hi All,
Just wondered if anyone else had seen issues with the Scheduler in the
latest version of D3Pro? Upgraded and then did some work on an existing
project and now if wont work - loads of errors on building the project
around no driving source.
Any workarounds or anything? I have reported to TrueBlue.
Thanks
Dave
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
|
--- In Crestron@..., "tres n3L" <tres@...> wrote:
no I was not told this.
Come on spit it out ! I hate when that kind of thing happen. Rollback to the previous database is the fix ?
|
I was told that an option is to go back in my database. I was also told that engineering is aware of the issue and is working hard on a fix. anything else I was told I am not at liberty to share. besides, it has no bearing on the issue at hand. I just rolled back my database today, reloaded, and everything from the scheduler works as intended. :) tres From: Crestron@... [mailto:Crestron@...] On Behalf Of mehuneau Sent: Monday, April 02, 2012 4:57 PM To: Crestron@... Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken? --- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres n3L" <tres@...> wrote:
no I was not told this.
Come on spit it out ! I hate when that kind of thing happen. Rollback to the previous database is the fix ?
|
So did I.
Nevertheless I see some "previous driving source" errors.
That may be related to the new scenes feature I've been using.
...
--
Marc-Etienne HUNEAU
? 06.615.516.90
toggle quoted message
Show quoted text
Le 3 avr. 2012 ¨¤ 00:01, "tres n3L" <tres@...> a ¨¦crit : I was told that an option is to go back in my database. I was also told that
engineering is aware of the issue and is working hard on a fix. anything
else I was told I am not at liberty to share. besides, it has no bearing on
the issue at hand.
I just rolled back my database today, reloaded, and everything from the
scheduler works as intended.
:)
tres
From: Crestron@... [mailto:Crestron@...] On Behalf
Of mehuneau
Sent: Monday, April 02, 2012 4:57 PM
To: Crestron@...
Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken?
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres
n3L" <tres@...> wrote:
no I was not told this.
Come on spit it out !
I hate when that kind of thing happen.
Rollback to the previous database is the fix ?
[Non-text portions of this message have been removed]
|
I ran into this issue on Friday. Opened up in SIMPL to find that the updated SIMPL+ module nested inside the updated D3Pro scheduler module was only compiled for 3-series processors. Obviously someone at Crestron forgot morning coffee at some point.
Compiled for 2-series and dropped in the updated module and everything worked fine.
FYI, I also found that the logic for all occupancy sensors has been reversed somehow with the latest update, so hopefully they'll fix that as well.
Sean
toggle quoted message
Show quoted text
--- In Crestron@..., "tres n3L" <tres@...> wrote:
I was told that an option is to go back in my database. I was also told that
engineering is aware of the issue and is working hard on a fix. anything
else I was told I am not at liberty to share. besides, it has no bearing on
the issue at hand.
I just rolled back my database today, reloaded, and everything from the
scheduler works as intended.
:)
tres
From: Crestron@... [mailto:Crestron@...] On Behalf
Of mehuneau
Sent: Monday, April 02, 2012 4:57 PM
To: Crestron@...
Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken?
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres
n3L" <tres@> wrote:
no I was not told this.
Come on spit it out !
I hate when that kind of thing happen.
Rollback to the previous database is the fix ?
[Non-text portions of this message have been removed]
|
Le 3 avr. 2012 ¨¤ 06:37, "Sean" <sound.scan@...> a ¨¦crit : I ran into this issue on Friday. Opened up in SIMPL to find that the updated SIMPL+ module nested inside the updated D3Pro scheduler module was only compiled for 3-series processors. Obviously someone at Crestron forgot morning coffee at some point.
3 is the new 2...
Compiled for 2-series and dropped in the updated module and everything worked fine.
So, you had to extract the module somehow ?
FYI, I also found that the logic for all occupancy sensors has been reversed somehow with the latest update, so hopefully they'll fix that as well.
Yeah, it took me 10 minutes to understand why the lights were out. Sean
--- In Crestron@..., "tres n3L" <tres@...> wrote:
I was told that an option is to go back in my database. I was also told that
engineering is aware of the issue and is working hard on a fix. anything
else I was told I am not at liberty to share. besides, it has no bearing on
the issue at hand.
I just rolled back my database today, reloaded, and everything from the
scheduler works as intended.
:)
tres
From: Crestron@... [mailto:Crestron@...] On Behalf
Of mehuneau
Sent: Monday, April 02, 2012 4:57 PM
To: Crestron@...
Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken?
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres
n3L" <tres@> wrote:
no I was not told this.
Come on spit it out !
I hate when that kind of thing happen.
Rollback to the previous database is the fix ?
[Non-text portions of this message have been removed]
|
Thing is, if they fix the occupancy sensors I'll have to change it back to how it used to be 8-)
It seems that they added the option to reverse the behaviour in the property grid and the default was wrong. Kinda.
--
Marc-Etienne HUNEAU
? 06.615.516.90
toggle quoted message
Show quoted text
Le 3 avr. 2012 ¨¤ 06:37, "Sean" <sound.scan@...> a ¨¦crit : I ran into this issue on Friday. Opened up in SIMPL to find that the updated SIMPL+ module nested inside the updated D3Pro scheduler module was only compiled for 3-series processors. Obviously someone at Crestron forgot morning coffee at some point.
Compiled for 2-series and dropped in the updated module and everything worked fine.
FYI, I also found that the logic for all occupancy sensors has been reversed somehow with the latest update, so hopefully they'll fix that as well.
Sean
--- In Crestron@..., "tres n3L" <tres@...> wrote:
I was told that an option is to go back in my database. I was also told that
engineering is aware of the issue and is working hard on a fix. anything
else I was told I am not at liberty to share. besides, it has no bearing on
the issue at hand.
I just rolled back my database today, reloaded, and everything from the
scheduler works as intended.
:)
tres
From: Crestron@... [mailto:Crestron@...] On Behalf
Of mehuneau
Sent: Monday, April 02, 2012 4:57 PM
To: Crestron@...
Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken?
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres
n3L" <tres@> wrote:
no I was not told this.
Come on spit it out !
I hate when that kind of thing happen.
Rollback to the previous database is the fix ?
|
BTW the new database is out, with the bug fix. -- Marc-Etienne HUNEAU Dark Side of the Room (DSR) +33 (0)6 615 516 90 Le 3 avr. 2012 ¨¤ 08:57, Marc-Etienne Huneau a ¨¦crit : Thing is, if they fix the occupancy sensors I'll have to change it back to how it used to be 8-)
It seems that they added the option to reverse the behaviour in the property grid and the default was wrong. Kinda.
--
Marc-Etienne HUNEAU
? 06.615.516.90
Le 3 avr. 2012 ¨¤ 06:37, "Sean" <sound.scan@...> a ¨¦crit :
I ran into this issue on Friday. Opened up in SIMPL to find that the updated SIMPL+ module nested inside the updated D3Pro scheduler module was only compiled for 3-series processors. Obviously someone at Crestron forgot morning coffee at some point.
Compiled for 2-series and dropped in the updated module and everything worked fine.
FYI, I also found that the logic for all occupancy sensors has been reversed somehow with the latest update, so hopefully they'll fix that as well.
Sean
--- In Crestron@..., "tres n3L" <tres@...> wrote:
I was told that an option is to go back in my database. I was also told that
engineering is aware of the issue and is working hard on a fix. anything
else I was told I am not at liberty to share. besides, it has no bearing on
the issue at hand.
I just rolled back my database today, reloaded, and everything from the
scheduler works as intended.
:)
tres
From: Crestron@... [mailto:Crestron@...] On Behalf
Of mehuneau
Sent: Monday, April 02, 2012 4:57 PM
To: Crestron@...
Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken?
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres
n3L" <tres@> wrote:
no I was not told this.
Come on spit it out !
I hate when that kind of thing happen.
Rollback to the previous database is the fix ?
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
|
Does this include the bug fix for 3-series processors running Scheduler?
toggle quoted message
Show quoted text
On Apr 3, 2012, at 12:26 PM, Marc-Etienne HUNEAU <mehuneau@...> wrote: BTW the new database is out, with the bug fix.
--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90
Le 3 avr. 2012 ¨¤ 08:57, Marc-Etienne Huneau a ¨¦crit :
Thing is, if they fix the occupancy sensors I'll have to change it back to how it used to be 8-)
It seems that they added the option to reverse the behaviour in the property grid and the default was wrong. Kinda.
--
Marc-Etienne HUNEAU
? 06.615.516.90
Le 3 avr. 2012 ¨¤ 06:37, "Sean" <sound.scan@...> a ¨¦crit :
I ran into this issue on Friday. Opened up in SIMPL to find that the updated SIMPL+ module nested inside the updated D3Pro scheduler module was only compiled for 3-series processors. Obviously someone at Crestron forgot morning coffee at some point.
Compiled for 2-series and dropped in the updated module and everything worked fine.
FYI, I also found that the logic for all occupancy sensors has been reversed somehow with the latest update, so hopefully they'll fix that as well.
Sean
--- In Crestron@..., "tres n3L" <tres@...> wrote:
I was told that an option is to go back in my database. I was also told that
engineering is aware of the issue and is working hard on a fix. anything
else I was told I am not at liberty to share. besides, it has no bearing on
the issue at hand.
I just rolled back my database today, reloaded, and everything from the
scheduler works as intended.
:)
tres
From: Crestron@... [mailto:Crestron@...] On Behalf
Of mehuneau
Sent: Monday, April 02, 2012 4:57 PM
To: Crestron@...
Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken?
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres
n3L" <tres@> wrote:
no I was not told this.
Come on spit it out !
I hate when that kind of thing happen.
Rollback to the previous database is the fix ?
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
|
Fixed: Issue where the event scheduler is marked as not compatible with 2-series processor I'd say it doesn't. -- Marc-Etienne HUNEAU Dark Side of the Room (DSR) +33 (0)6 615 516 90 Le 3 avr. 2012 ¨¤ 18:47, Bradley Gibbs a ¨¦crit : Does this include the bug fix for 3-series processors running Scheduler?
On Apr 3, 2012, at 12:26 PM, Marc-Etienne HUNEAU <mehuneau@...> wrote:
BTW the new database is out, with the bug fix.
--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90
Le 3 avr. 2012 ¨¤ 08:57, Marc-Etienne Huneau a ¨¦crit :
Thing is, if they fix the occupancy sensors I'll have to change it back to how it used to be 8-)
It seems that they added the option to reverse the behaviour in the property grid and the default was wrong. Kinda.
--
Marc-Etienne HUNEAU
? 06.615.516.90
Le 3 avr. 2012 ¨¤ 06:37, "Sean" <sound.scan@...> a ¨¦crit :
I ran into this issue on Friday. Opened up in SIMPL to find that the updated SIMPL+ module nested inside the updated D3Pro scheduler module was only compiled for 3-series processors. Obviously someone at Crestron forgot morning coffee at some point.
Compiled for 2-series and dropped in the updated module and everything worked fine.
FYI, I also found that the logic for all occupancy sensors has been reversed somehow with the latest update, so hopefully they'll fix that as well.
Sean
--- In Crestron@..., "tres n3L" <tres@...> wrote:
I was told that an option is to go back in my database. I was also told that
engineering is aware of the issue and is working hard on a fix. anything
else I was told I am not at liberty to share. besides, it has no bearing on
the issue at hand.
I just rolled back my database today, reloaded, and everything from the
scheduler works as intended.
:)
tres
From: Crestron@... [mailto:Crestron@...] On Behalf
Of mehuneau
Sent: Monday, April 02, 2012 4:57 PM
To: Crestron@...
Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken?
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres
n3L" <tres@> wrote:
no I was not told this.
Come on spit it out !
I hate when that kind of thing happen.
Rollback to the previous database is the fix ?
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
|
I got a beta file from TB that is supposed to fix issues related to the 3-series. I assumed it would be rolled into the next release but I guess not. On Apr 3, 2012, at 1:04 PM, Marc-Etienne HUNEAU <mehuneau@...> wrote: Fixed:
Issue where the event scheduler is marked as not compatible with 2-series processor
I'd say it doesn't.
--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90
Le 3 avr. 2012 ¨¤ 18:47, Bradley Gibbs a ¨¦crit :
Does this include the bug fix for 3-series processors running Scheduler?
On Apr 3, 2012, at 12:26 PM, Marc-Etienne HUNEAU <mehuneau@...> wrote:
BTW the new database is out, with the bug fix.
--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90
Le 3 avr. 2012 ¨¤ 08:57, Marc-Etienne Huneau a ¨¦crit :
Thing is, if they fix the occupancy sensors I'll have to change it back to how it used to be 8-)
It seems that they added the option to reverse the behaviour in the property grid and the default was wrong. Kinda.
--
Marc-Etienne HUNEAU
? 06.615.516.90
Le 3 avr. 2012 ¨¤ 06:37, "Sean" <sound.scan@...> a ¨¦crit :
I ran into this issue on Friday. Opened up in SIMPL to find that the updated SIMPL+ module nested inside the updated D3Pro scheduler module was only compiled for 3-series processors. Obviously someone at Crestron forgot morning coffee at some point.
Compiled for 2-series and dropped in the updated module and everything worked fine.
FYI, I also found that the logic for all occupancy sensors has been reversed somehow with the latest update, so hopefully they'll fix that as well.
Sean
--- In Crestron@..., "tres n3L" <tres@...> wrote:
I was told that an option is to go back in my database. I was also told that
engineering is aware of the issue and is working hard on a fix. anything
else I was told I am not at liberty to share. besides, it has no bearing on
the issue at hand.
I just rolled back my database today, reloaded, and everything from the
scheduler works as intended.
:)
tres
From: Crestron@... [mailto:Crestron@...] On Behalf
Of mehuneau
Sent: Monday, April 02, 2012 4:57 PM
To: Crestron@...
Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken?
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres
n3L" <tres@> wrote:
no I was not told this.
Come on spit it out !
I hate when that kind of thing happen.
Rollback to the previous database is the fix ?
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
|
Does the latest Crestron DB fix this issue?
toggle quoted message
Show quoted text
--- In Crestron@..., Brad Gibbs <bradgibbs@...> wrote:
I got a beta file from TB that is supposed to fix issues related to the 3-series. I assumed it would be rolled into the next release but I guess not.
On Apr 3, 2012, at 1:04 PM, Marc-Etienne HUNEAU <mehuneau@...> wrote:
Fixed:
Issue where the event scheduler is marked as not compatible with 2-series processor
I'd say it doesn't.
--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90
Le 3 avr. 2012 ?? 18:47, Bradley Gibbs a ??crit :
Does this include the bug fix for 3-series processors running Scheduler?
On Apr 3, 2012, at 12:26 PM, Marc-Etienne HUNEAU <mehuneau@...> wrote:
BTW the new database is out, with the bug fix.
--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90
Le 3 avr. 2012 ?? 08:57, Marc-Etienne Huneau a ??crit :
Thing is, if they fix the occupancy sensors I'll have to change it back to how it used to be 8-)
It seems that they added the option to reverse the behaviour in the property grid and the default was wrong. Kinda.
--
Marc-Etienne HUNEAU
??? 06.615.516.90
Le 3 avr. 2012 ?? 06:37, "Sean" <sound.scan@...> a ??crit :
I ran into this issue on Friday. Opened up in SIMPL to find that the updated SIMPL+ module nested inside the updated D3Pro scheduler module was only compiled for 3-series processors. Obviously someone at Crestron forgot morning coffee at some point.
Compiled for 2-series and dropped in the updated module and everything worked fine.
FYI, I also found that the logic for all occupancy sensors has been reversed somehow with the latest update, so hopefully they'll fix that as well.
Sean
--- In Crestron@..., "tres n3L" <tres@> wrote:
I was told that an option is to go back in my database. I was also told that
engineering is aware of the issue and is working hard on a fix. anything
else I was told I am not at liberty to share. besides, it has no bearing on
the issue at hand.
I just rolled back my database today, reloaded, and everything from the
scheduler works as intended.
:)
tres
From: Crestron@... [mailto:Crestron@...] On Behalf
Of mehuneau
Sent: Monday, April 02, 2012 4:57 PM
To: Crestron@...
Subject: [Crestron] Re: D3 Pro 3.0.31 Scheduler Broken?
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "tres
n3L" <tres@> wrote:
no I was not told this.
Come on spit it out !
I hate when that kind of thing happen.
Rollback to the previous database is the fix ?
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
|
