开云体育

First Alert Alarm

Jim A All Messages By This Member #133023 Has anyone intigrated a FirstAlert FA-1670C I currently am having trouble communicating with the alarm panel The alarm company says it's a re-branded Vista 128bp All the setup feilds seem to be the same in that alarm setup. The interface module is a Honeywell 4100SM. I can see data on the from_device$ in Debugger whenever I open or close a door, but I cannot get the alarm to respond to a Poll or get feedback out of the zone status module. Thanks Jim A
weddellkw All Messages By This Member #133027 Do you have the 4100SM connected to zone 9 of the security panel? toggle quoted message Show quoted text --- In Crestron@..., "bolina_1999" <bolina_1999@...> wrote: Has anyone intigrated a FirstAlert FA-1670C I currently am having trouble communicating with the alarm panel The alarm company says it's a re-branded Vista 128bp All the setup feilds seem to be the same in that alarm setup. The interface module is a Honeywell 4100SM. I can see data on the from_device$ in Debugger whenever I open or close a door, but I cannot get the alarm to respond to a Poll or get feedback out of the zone status module. Thanks Jim A
Jim A All Messages By This Member #133031 The 4100SM is connected to a header on the alarm board not to a zone. toggle quoted message Show quoted text --- In Crestron@..., "weddellkw" <weddellkw@...> wrote: Do you have the 4100SM connected to zone 9 of the security panel? --- In Crestron@..., "bolina_1999" <bolina_1999@> wrote: Has anyone intigrated a FirstAlert FA-1670C I currently am having trouble communicating with the alarm panel The alarm company says it's a re-branded Vista 128bp All the setup feilds seem to be the same in that alarm setup. The interface module is a Honeywell 4100SM. I can see data on the from_device$ in Debugger whenever I open or close a door, but I cannot get the alarm to respond to a Poll or get feedback out of the zone status module. Thanks Jim A
weddellkw All Messages By This Member #133034 Thats probably your problem, see this document (from Honeywell Tech): Note the Figure.6 (for the Vista BP series) vs. Figure.7 (for the FBP series). I have had to fix this behind our own techs multiple times (I keep meaning to cut the important sections out of that PDF and put them into my own cheat-sheet to be included with the job-spec...since technicians don't like reading instructions apparently.) -kw toggle quoted message Show quoted text --- In Crestron@..., "bolina_1999" <bolina_1999@...> wrote: The 4100SM is connected to a header on the alarm board not to a zone. --- In Crestron@..., "weddellkw" <weddellkw@> wrote: Do you have the 4100SM connected to zone 9 of the security panel? --- In Crestron@..., "bolina_1999" <bolina_1999@> wrote: Has anyone intigrated a FirstAlert FA-1670C I currently am having trouble communicating with the alarm panel The alarm company says it's a re-branded Vista 128bp All the setup feilds seem to be the same in that alarm setup. The interface module is a Honeywell 4100SM. I can see data on the from_device$ in Debugger whenever I open or close a door, but I cannot get the alarm to respond to a Poll or get feedback out of the zone status module. Thanks Jim A
Jim A All Messages By This Member #133036 Wow how did I miss that, As soon as I can get the alarm company back out here I will give it a try Thanks toggle quoted message Show quoted text --- In Crestron@..., "weddellkw" <weddellkw@...> wrote: Thats probably your problem, see this document (from Honeywell Tech): Note the Figure.6 (for the Vista BP series) vs. Figure.7 (for the FBP series). I have had to fix this behind our own techs multiple times (I keep meaning to cut the important sections out of that PDF and put them into my own cheat-sheet to be included with the job-spec...since technicians don't like reading instructions apparently.) -kw --- In Crestron@..., "bolina_1999" <bolina_1999@> wrote: The 4100SM is connected to a header on the alarm board not to a zone. --- In Crestron@..., "weddellkw" <weddellkw@> wrote: Do you have the 4100SM connected to zone 9 of the security panel? --- In Crestron@..., "bolina_1999" <bolina_1999@> wrote: Has anyone intigrated a FirstAlert FA-1670C I currently am having trouble communicating with the alarm panel The alarm company says it's a re-branded Vista 128bp All the setup feilds seem to be the same in that alarm setup. The interface module is a Honeywell 4100SM. I can see data on the from_device$ in Debugger whenever I open or close a door, but I cannot get the alarm to respond to a Poll or get feedback out of the zone status module. Thanks Jim A

Previous Topic Next Topic