¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Crestron Control App for Zoom Rooms


 

Has anyone developed this for an iPad? I am curious what your experience was.
It appears we need to generate certificates for both iPad and CP4.
Does two-way feedback work as well?
?
Thanks


 

Following these instructions...
?
?
I programmed a single power on/off button for a Samsung display with feedback on a TST-1080 and CP4 as an initial test for a system we are doing. I tested this with a tech remotely and he reported proper control and feedback. ?
?
There are specific instructions in the link above for iPad and certificates as you mention. I cannot report on the performance of that implementation.
?
Getting ready to remotely test my full project in the next few days which includes the TST-1080 and Poly TC10 panels (and WebXpanels).
?
?
?
?
?


 

While commissioning our UC-B70-A-Z systems, I followed that deployment guide exactly, and had nothing but problems.?
?
I eventually was told by a very smart Crestron employee that the deployment guide is only about 30% helpful, which is just about right. Yes, it's not exactly what you're doing, but be aware.


 

"30% helpful" Wow that's very encouraging. I better try to shop-test this before I make myself look like a total incompetent in front of the client.


 

This runs a CH5 project within the Zoom app. It provides full two-way control just as a normal CH5 project running on a panel would. Yes, you will need to follow the deployment guide and make sure the Ipad has the appropriate root certificate in it's store. There is also a header you need to enable on the control system.?


 

The deployment guide is accurate if you follow it. The original publication had some issues but otherwise it captures all the needed requirements.


 

That sounds better. As I understand it, the project is ran on the processor and served up to the UI (iPad etc). Is there a way to get feedback, like the system is in a call etc?
?
Thanks


 

There are some reserved joins in Construct but I haven't personally tested what is available.?


 

Has anyone done this with the iPad? I'm fighting with these PITD certificates.