开云体育

X60 to X70 Zoom Room swap

[email protected] All Messages By This Member #255809 Swapping out a TSW-1060 with a 1070 today and somehow the processor in my 3 series DMPS3-4K-350C won't recognize the 1070. Same code from 1060 and set IPID to the same. Panel looks fine with 1060 pgm loaded. Sitting on the control LAN of the processor. Any ideas as to what I should look for???
Steve Adams All Messages By This Member #255810 开云体育 I just replaced one of these yesterday. Make sure that the 1070 is running the correct firmware for Zoom currently tsw-xx70_2.006.0054.001, also when you set the IP-ID on the webpage for the 1070, if your IP-ID in Smpl is ex. IP-ID 03, enter it in the 1070 as 3 not 03. Also make sure you have the Page Flip for the Room Controls enabled in the setup webpage and select if you want it to flip to the Project or Mode. If you still have issues, open Text Console on the CP3 and try pinging the 1070 IP address. toggle quoted message Show quoted text From: [email protected] <[email protected]> on behalf of Pete.hagan via groups.io <Pete.hagan@...> Sent: Thursday, January 30, 2025 9:27 AM To: [email protected] <[email protected]> Subject: [crestron] X60 to X70 Zoom Room swap ? Swapping out a TSW-1060 with a 1070 today and somehow the processor in my 3 series DMPS3-4K-350C won't recognize the 1070. Same code from 1060 and set IPID to the same. Panel looks fine with 1060 pgm loaded. Sitting on the control LAN of the processor. Any ideas as to what I should look for???

Previous Topic Next Topic