¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Topics

Cisco Touch10 Popup Message

 

I have a 2 way divisible room with QTY 2 Cisco Pro and QTY 2 Cisco T10 Touchscreens. We are using a Crestron processor to monitor divisible wall status via a partition sensor and a DM switcher to share sources and displays between the 2 rooms. The client would like a message to pop up on the Room B TP to show all controls should happen from Room A. I know there is some custom buttons you can add to the T10 but is there a way to add an entire pop page or message?
?
Thanks in advance!?
 

Yes, try?xCommand UserInterface Message Alert Display.? Command reference is here:?

On Thu, Jan 16, 2025 at 11:37?AM Eduardo Martinez via <eduardomartinez20=[email protected]> wrote:

I have a 2 way divisible room with QTY 2 Cisco Pro and QTY 2 Cisco T10 Touchscreens. We are using a Crestron processor to monitor divisible wall status via a partition sensor and a DM switcher to share sources and displays between the 2 rooms. The client would like a message to pop up on the Room B TP to show all controls should happen from Room A. I know there is some custom buttons you can add to the T10 but is there a way to add an entire pop page or message?
?
Thanks in advance!?
 

Thanks for the heads up, I will check that out today.?
 

Thanks @Jeremy. That worked great. I had to play around to get the correct syntax to make it work but it works well.?
?
For reference here is the command I'm running from a SIO: xCommand UserInterface Message Alert Display Title: "Alert" Text: "Rooms Combined. Use Panel in Room 4" Duration: 0\x0D\x0A
?
Also using the following command to clear the message: xCommand UserInterface Message Alert Clear\x0D\x0A

1 - 4 of 4