¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Topics

Missing 1 IR command head scratcher

 

Does anyone out there have the IR commands for a shaw XG15 "ignite" remote?
I have never had this happen before but after learning in all of the commands, "select" simply doesn't work.
I have learned it many times and it is successfully learned but doesn't work with the ignite box.
All other commands work flawlessly.
Anyone have an experience like this and a work around?
 



can you upload the learned IR file to the files section?
I have hardware and software to investigate IR commands.

Best regards
Crestronfreak55
 

When learning that button, try tapping it instead of holding it.
I'm wondering if it has a double code associated to the button. A press code and a hold code. Not common but wouldn't be the first time I've seen it.
 

Tried many different hold times, remote angle, turned off lights and put the learner on a black non-glare surface.


On Sat, Jun 8, 2024, 2:38 p.m. Eric Luckart via <eluckart=[email protected]> wrote:
When learning that button, try tapping it instead of holding it.
I'm wondering if it has a double code associated to the button. A press code and a hold code. Not common but wouldn't be the first time I've seen it.
 

Will do and let you know when it is done.
Appreciate the help.

On Sat, Jun 8, 2024, 2:32 p.m. crestronfreak55 via <crestronfreak55=[email protected]> wrote:


can you upload the learned IR file to the files section?
I have hardware and software to investigate IR commands.

Best regards
Crestronfreak55

 

I uploaded the file.
Any help would be much appreciated
 

Hi,

I tried to investigate the IR codes, unfortunately without success.

1 - 7 of 7