Re: Showing msg error in cp3
Yes that is normal. The MSG light will come on whenever a message is written to the error log. A clean out of the box CP3 will do this as when it bots up there are messages written to the log- that's what this light is for. Kinda useless.?
|
Ditto, my laptop is a 4K display and my desktop is 3x >1920x1080 (but sub 4K) and I¡¯ve seen the occasional scaling issue in other programs but can¡¯t say I¡¯ve seen anything particularly
horrid in SIMPL
?
What OS and DPI settings? When things go horribly wrong with scaling its more typically DPI than straight resplution
?
--
Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Diamond)
ControlWorks Consulting, LLC
Direct: (+1)440.771.4807 | Cleveland: (+1)440.449.1100? | Boston: (+1)508.695.0188 | DC: (+1)202.381.9070? | Fax: (+1)440.449.1106
Crestron Services Provider | Biamp Authorized Independent Programmers | Extron Qualified Independent Programmer
?
toggle quoted message
Show quoted text
From: [email protected] [mailto: [email protected]]
On Behalf Of Caleb Radecky
Sent: Monday, October 05, 2020 6:54 AM
To: [email protected]
Subject: Re: [crestron] SimplWindows 4.14.21
?
I run it on 4k monitors and don't see any artifacting.?
Caleb Radecky |?Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC |?Crestron Services Provider?|
8228 Mayfield Rd. Suite 6B Rear, Cleveland OH 44026
D.?440.771.4809 |?O.440.449.1100?X1109 | F.440.449.1106 |
Can?t confirm that.
Running on a 5120x1440 screen without issues.
?
Cheers, Thorsten
?
?
One issue that you will hit beyond 4.11.06 is when you open the Simp+ editor on a hi-res monitor (higher than 1920x1080) it is riddled with graphical artifacts that make it unusable). ?I have found two workarounds. ?First,
add one monitor to your rig that is 1920x1080 and put Simpl+ there. ?Second, use Visual Studio Code with One of the Crestron extensions. ?The sad part about this is that it has been broke for months and Crestron seems to think this is OK :-(
|
I run it on 4k monitors and don't see any artifacting.?
Caleb
Radecky |?Manager,
Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks
Consulting, LLC |?Crestron
Services Provider?|
8228 Mayfield Rd. Suite 6B Rear, Cleveland OH 44026
D.?440.771.4809 |?O.440.449.1100?X1109 | F.440.449.1106 |
toggle quoted message
Show quoted text
Can?t confirm that.
Running on a 5120x1440 screen without issues.
?
Cheers, Thorsten
?
?
One issue that you will hit beyond 4.11.06 is when you open the Simp+ editor on a hi-res monitor (higher than 1920x1080) it is riddled with graphical artifacts that make it unusable). ?I have found two workarounds. ?First, add one monitor
to your rig that is 1920x1080 and put Simpl+ there. ?Second, use Visual Studio Code with One of the Crestron extensions. ?The sad part about this is that it has been broke for months and Crestron seems to think this is OK :-(
|
Can?t confirm that. Running on a 5120x1440 screen without issues. ? Cheers, Thorsten ? ? One issue that you will hit beyond 4.11.06 is when you open the Simp+ editor on a hi-res monitor (higher than 1920x1080) it is riddled with graphical artifacts that make it unusable). ?I have found two workarounds. ?First, add one monitor to your rig that is 1920x1080 and put Simpl+ there. ?Second, use Visual Studio Code with One of the Crestron extensions. ?The sad part about this is that it has been broke for months and Crestron seems to think this is OK :-(
|
I have a problem with TSW-760 panel...
After the firmware update, only the logo will be displayed. I waited a few hours, but still just the logo.
I tried Restart or Factory Reset, but nothing helps,
DiscoveryTool will not find the panel.
?
Some idea? Is it possible to implement the update via USB?
?
Thank you for any help.
|
Re: Issues with Sonos & Crestron
Oops...sorry Brian, you beat me to it...
|
Re: Issues with Sonos & Crestron
Guys...there is a BlueOS module in the store. ?Also it has no SiriusXM...
|
Re: Simpl#/Series 3 module for Tesla vehicle control
#user_library
Feel free, Jason! The Simpl#, Simpl+, and User modules are there in the .zip?file.? I think the module should be pretty intuitive to use, but let me know if you run into any issues.
Tim
This would be a cool feature as a Crestron Home Extension for clients that have Tesla¡¯s.? ? Hey all, A couple of years ago, I was dinking around to see if I could control my Tesla Model 3 via my Crestron MC3.? I ended up writing a couple of Simpl# libraries that allowed me to communicate with Tesla's vehicle APIs and display things like charging state, range, etc and to perform functions like turning on the HVAC.? While going through and reorganizing some of my private code repositories, I stumbled across it again, and figured I might as well open-source it in case anyone else might find use for it.? Documentation so far is lacking, as it wasn't originally intended for public consumption, but I've gone ahead and made the repo public in my github account: . To utilize the libraries, you'll need to have and understand how to use SIMPL Windows, and have a Series 3 controller. I will continue to expand the documentation as I find time. Hopefully, someone will find it interesting or useful.
|
Re: Simpl#/Series 3 module for Tesla vehicle control
#user_library
This would be a cool feature as a Crestron Home Extension for clients that have Tesla¡¯s.?
toggle quoted message
Show quoted text
On Oct 4, 2020, at 9:35 PM, cynicl12000@... wrote:
? Hey all,
A couple of years ago, I was dinking around to see if I could control my Tesla Model 3 via my Crestron MC3.? I ended up writing a couple of Simpl# libraries that allowed me to communicate with Tesla's vehicle APIs and display things like charging state, range, etc and to perform functions like turning on the HVAC.?
While going through and reorganizing some of my private code repositories, I stumbled across it again, and figured I might as well open-source it in case anyone else might find use for it.? Documentation so far is lacking, as it wasn't originally intended for public consumption, but I've gone ahead and made the repo public in my github account: https://github.com/lamentary/SimplyTeslaSharp.
To utilize the libraries, you'll need to have and understand how to use SIMPL Windows, and have a Series 3 controller.
I will continue to expand the documentation as I find time.
Hopefully, someone will find it interesting or useful.
|
Hey all,
A couple of years ago, I was dinking around to see if I could control my Tesla Model 3 via my Crestron MC3.? I ended up writing a couple of Simpl# libraries that allowed me to communicate with Tesla's vehicle APIs and display things like charging state, range, etc and to perform functions like turning on the HVAC.?
While going through and reorganizing some of my private code repositories, I stumbled across it again, and figured I might as well open-source it in case anyone else might find use for it.? Documentation so far is lacking, as it wasn't originally intended for public consumption, but I've gone ahead and made the repo public in my github account:
To utilize the libraries, you'll need to have and understand how to use SIMPL Windows, and have a Series 3 controller.
I will continue to expand the documentation as I find time.
Hopefully, someone will find it interesting or useful.
|
Re: Issues with Sonos & Crestron
I just checked, and their latest modules have finally added SmartGraphics support.
If you download the module, you'll see the CRPC i/o.
The lack of Pandora support is a bit odd.
Also, no Apple music support makes it a tough sell for most of our clients.
Although, at least it has AirPlay 2 support.
The API is readily available, so maybe we can convince Josh.ai to support it.
It does look quite promising.
|
Re: Issues with Sonos & Crestron
It definitely looks promising.? Has the features I am looking for:
Ethernet, L/R audio, SPDIF, Airplay2, OpenAPI, and supports major
streaming platforms (except for Pandora).? Even IR control.?
Looks like you may have to write your own module to interface with
it.? And no SmartGraphics.? But I can live with that.? Pandora
however may be the deal killer for some clients.
Some others have posted on it in the past with issues with large
Tidal libraries and other quirks but that may be fixed now.
Unless someone knows some critical flaw with these units, I think my
employer will be very interested in it.?
Thanks,
Steve
On 10/4/20 5:56 PM, Michael Block via
groups.io wrote:
toggle quoted message
Show quoted text
What about the blusound line? is that better than autonomic?
|
Re: Extron Sharelink 200 control
Anyone had success with controlling these??
|
Re: Issues with Sonos & Crestron
What about the blusound line? is that better than autonomic?
|
More information..part 2:
I was able to fix the compiler error in Simpl+ but I also noticed that in the transport controls for CEN-NSP-1, the?NextTitle_F$ is a serial output with no serial input.
But in VT Pro, the Media Player application shows "Next: Song Title", so this makes me think that I can change the text.
Any suggestions? Thanks.
|
One issue that you will hit beyond 4.11.06 is when you open the Simp+ editor on a hi-res monitor (higher than 1920x1080) it is riddled with graphical artifacts that make it unusable). ?I have found two workarounds. ?First, add one monitor to your rig that is 1920x1080 and put Simpl+ there. ?Second, use Visual Studio Code with One of the Crestron extensions. ?The sad part about this is that it has been broke for months and Crestron seems to think this is OK :-(
|
Re: Issues with Sonos & Crestron
...I don'ta think that word means what you think it means... "??  ?AVMaster
...Please note the word ¡°partnership¡± in the title "
|
Re: Issues with Sonos & Crestron
... and there lies the problem! ?Try finding a music server that isn¡¯t clunky and is reliable. ?Also, it needs to support most music services.
I have been installing Autonomics since they controlled the Apple TV 1 and then partnered with S1 Digital. ?They¡¯ve always been a bit clunky. ?Snap AV didn¡¯t help that at all. ?Hopefully, it¡¯ll get better now that they¡¯ve separated a bit. ?At least it still works decent with the Smart Graphics touchscreens.
I love the idea of Roon, but it¡¯s only great for music nuts like me that actually want to own music. ?They don¡¯t support streaming services that most clients use.
It¡¯s sad when the best option might be to buy 4 AirPort Express units off eBay, so each member of the family can play music from the device they¡¯re usually listening to it from anyway.
... now where¡¯s that Escient that controls 400 disc Sony CD changers?!
|
Re: Issues with Sonos & Crestron
The TRUE secret is TO JUST NOT SELL SONOS! Stick to a true media player that integrates and ISNT direct to consumer and DOESN'T care about integration or home control systems. One that truly believes that it should be allowed to be controlled by a 3rd party system. One that doesn't lock down its whole system and just allows minimal control.?
|
Re: Issues with Sonos & Crestron
The secret to reverting back to S1 is to download the S1 app and log in to you or your customers account.? We keep and old Connect handy at the shop and use it to add to the accoumt under S1...it will then have all of the favorites and streaming services.? Next step is to default all the S2 stuff and add it to the S1 account...then once up and running we remove the shop Connect and viola.? I believe the Arc, Move and latest Sub MUST be S2 tho so watch out for that.??
|
AVMaster
Michael Block
Dean Detton