开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: T+A equipment control

 

Thanks Peter! I'll give this a try! Harold

--- In Crestron@..., "peterjablonicky" <peterjablonicky@...> wrote:

T+A have a Crestron module:


Is not that enough?


--- In Crestron@..., "Harold" <hlaudio@> wrote:

Hey Everybody!

Any German companies here? I have need of RS232 control module(s) for a few T+A devices. Hoping someone would like to sell me a module or two.
Re: Tstat change 74,3 degrees to 74

 

Thanks all for the answers I will try this rounding in simpl and report my results.

Thanks again for all the replies

Sent from my pocket computer
Re: Degree symbol ASCII on TP (non-core 3)

Heath Volmer
 

There you go! Thanks Chris

I got 248 both from Crestron's ASCII chart and from various google
searches. At that point, I didn't think of looking at character map,
figuring that something was wrong with the font / mobile pro.

Heath

On Sun, Sep 16, 2012 at 2:51 PM, mrmondegreen
<chrisw@...>wrote:

**




Try ASCII 176 (decimal) for the degree symbol, that's the standard mapping
in most GUI-era font sets (e.g. Arial).

When in doubt, check the codes in Character Map, which will show you the
actual font-level character mappings. It looks like Crestron's ASCII
conversion chart in SIMPL help needs to be updated, as it includes line and
fill characters which haven't been in wide-spread use for quite some time.
I'm assuming that's where you got the 248 from?

Chris Welsh

--- In Crestron@..., Heath Volmer <hvolmer@...> wrote:

If I use ASCII 248 on a TP (or Crestron Mobile in this case) I get an
empty-set, or null symbol, not a degree like I expect. Is it possible to
get a degree symbol on a TP or Mobile?


Thanks, Heath





[Non-text portions of this message have been removed]
Re: apple tv control methods

Chris
 

I built a module for the AppleTv box as well and am seeing the same issue with feedback. When i look at the xml file that is sent back it shows it the same way. Not sure its the module and not related to the AppleTV itself. I am working on adding more feedback and have added as many shortcut keys as i have verified are working. Up to about 10 right now.

--- In Crestron@..., "mrez@..." <mrez@...> wrote:

My Apple TV jailbreak went into hay-wire mode and restored itself to factory default :( So until I can jailbreak it again I wont be able to test anything

--- In Crestron@..., "eagrubbs" <eagrubbs@> wrote:

The really great part is he did not password protect the module, so you can at least go in and make adjustments for your needs. I thank those that do not password the modules, so others can modify and learn from what has been done. :)

--- In Crestron@..., "Etienne" <etienne@> wrote:

I've managed to get the ATV back up-and-running by disconnecting the LAN cable and streaming via Wi-Fi, thus not being controlled from Crestron. I could then access the Maintenance menu again, ext. I then reconnected the LAN cable to test again and found the following:

1) Song title not displayed correctly, ex: should be: (Don't Go Back To) Rockville is showing as: (Don&apos;t Go Back To) Rockville
I had the same issue with 'o Solo Mia

2) Scrolling up/down a list of media requires double presses

3) Sometimes the title (name$) doesn't update, but the artist, album and album art did.

4) Selecting a movie after listening to music doesn't clear the artist and album text fields. Would also be great if the album art would clear if there was no album art, like it displays "Nothing playing" when nothing is playing. It then clears the fields.

5) Ffwd and rew works perfectly when watching movies.


The aTV Flash (black) 2.0 Media Player also has metadata fetching enabled and it will start displaying pictures from the current playing artist, ext. I wonder it this doesn't put my crappy network under stress. However with it disabled the album art doesn't update.
Re: Degree symbol ASCII on TP (non-core 3)

mrmondegreen
 

Try ASCII 176 (decimal) for the degree symbol, that's the standard mapping in most GUI-era font sets (e.g. Arial).

When in doubt, check the codes in Character Map, which will show you the actual font-level character mappings. It looks like Crestron's ASCII conversion chart in SIMPL help needs to be updated, as it includes line and fill characters which haven't been in wide-spread use for quite some time. I'm assuming that's where you got the 248 from?

Chris Welsh

--- In Crestron@..., Heath Volmer <hvolmer@...> wrote:

If I use ASCII 248 on a TP (or Crestron Mobile in this case) I get an
empty-set, or null symbol, not a degree like I expect. Is it possible to
get a degree symbol on a TP or Mobile?


Thanks, Heath
Re: Tstat change 74,3 degrees to 74

 

and if you do want to round, no S+ needed. It isn't that difficut to do 'SIMPL' rounding. Take the remainder from the divmod though an acomp, If greater than 5 add one to the quotient (abufs to select a 0 or 1 addend -> an asum) and use an aos to tigger the sequence.

--- In Crestron@..., Heath Volmer <hvolmer@...> wrote:

If this is an analog - 751 represents 75.1 - a DivMod by 10 will chop off
the decimal. Ignore the remainder output. It doesn't round up though.



On Sun, Sep 16, 2012 at 12:17 PM, Jon <fueler1@...> wrote:

**


Hi all,

I just changed my house from a HAI thermostat that output nice even
numbers like 74 or 76 degrees to the CHV-TSTAT and it outputs 74.3 or 75.1

Is there an easy thing like a ascale with the right settings that will
take the 75.1 or 751 and just convert it to 75 so I can keep all my
touchpanels and iphone projects the same?

I am thinking there is an easy way but its slipping my mind.

Thanks for any help

Jon
Re: T+A equipment control

 

T+A have a Crestron module:


Is not that enough?

--- In Crestron@..., "Harold" <hlaudio@...> wrote:

Hey Everybody!

Any German companies here? I have need of RS232 control module(s) for a few T+A devices. Hoping someone would like to sell me a module or two.
Re: Come On Crestron WTF - 3 hrs to change an IR file!!!!!

Doug Guth
 

I had almost the exact same thing happen to me last month. But since I'm
not a Master programmer it took me 4-hours! Customer asked for a simple IR
file update for a projector replacement. I updated the processor code to
control the projector but when I went to compile the code the new Crestron
database does not contain the original ASPI module for the EF-200 phone
hybrid. I downloaded the new module and incorporated it into the program.
I thought that was it until the customer asked that I update their
Corporate Logo on the Opening Page of their TPS 4500 touch panel. I edited
the touch panel program and loaded it into the touch panel. Bad decision!!
The touch panel failed to load the new code and then woke up with 揅an't
find page�. Yikes, I'd killed their system!! And they had a big meeting the
next day! I updated the firmware in the touch panel and the Crestron CNMSX
Pro processor but the touch panel still would not load the files. Out of
desperation I went on the FTP site and downloaded the 2.3xxx version of
Vision Tools Pro e, reworked the touch panel files, recompiled the touch
panel program. This time the panel loaded the files and worked properly.
Wow, it was 5:30pm, just in time to drive to my 5:00pm appointment!

*Doug Guth *CTS, BSBE, DMC-E
*Service Engineer/ Programming - Unified AV Systems*
dguth@... | www.unifiedav.com
d: 864.478.1866 | m: 864.907.8904 | o: 864.297.8533

The merger of Multi Media Services (Atlanta,GA) and
Video Systems of the Carolinas (Charlotte, NC) to form
Unified AV Systems, Inc.combines 55 years of operation
as separate closely held businesses to form a single,
integrated ProAV powerhouse.


[Non-text portions of this message have been removed]
Re: apple tv control methods

[email protected]
 

My Apple TV jailbreak went into hay-wire mode and restored itself to factory default :( So until I can jailbreak it again I wont be able to test anything

--- In Crestron@..., "eagrubbs" <eagrubbs@...> wrote:

The really great part is he did not password protect the module, so you can at least go in and make adjustments for your needs. I thank those that do not password the modules, so others can modify and learn from what has been done. :)

--- In Crestron@..., "Etienne" <etienne@> wrote:

I've managed to get the ATV back up-and-running by disconnecting the LAN cable and streaming via Wi-Fi, thus not being controlled from Crestron. I could then access the Maintenance menu again, ext. I then reconnected the LAN cable to test again and found the following:

1) Song title not displayed correctly, ex: should be: (Don't Go Back To) Rockville is showing as: (Don&apos;t Go Back To) Rockville
I had the same issue with 'o Solo Mia

2) Scrolling up/down a list of media requires double presses

3) Sometimes the title (name$) doesn't update, but the artist, album and album art did.

4) Selecting a movie after listening to music doesn't clear the artist and album text fields. Would also be great if the album art would clear if there was no album art, like it displays "Nothing playing" when nothing is playing. It then clears the fields.

5) Ffwd and rew works perfectly when watching movies.


The aTV Flash (black) 2.0 Media Player also has metadata fetching enabled and it will start displaying pictures from the current playing artist, ext. I wonder it this doesn't put my crappy network under stress. However with it disabled the album art doesn't update.
T+A equipment control

 

Hey Everybody!

Any German companies here? I have need of RS232 control module(s) for a few T+A devices. Hoping someone would like to sell me a module or two.
OT: need a new hobby?

Joseph Vossen
 

<>
Re: Tstat change 74,3 degrees to 74

 

Heather is right. there's a bit of Simpl+ already in every Tstat module.
Import the module, find the code, and change the rounding values.

Chris

On Sep 16, 2012 1:28 PM, "Heather Baiman" <heather@...> wrote:

**


If you dig through the Crestron TSTAT module, you will find a piece of
simpl+ that does this for you (rounds to the nearest whole number)

________________________________

From: Crestron@... on behalf of Jon
Sent: Sun 9/16/2012 2:17 PM
To: Crestron@...
Subject: [Crestron] Tstat change 74,3 degrees to 74

Hi all,

I just changed my house from a HAI thermostat that output nice even
numbers like 74 or 76 degrees to the CHV-TSTAT and it outputs 74.3 or 75.1

Is there an easy thing like a ascale with the right settings that will
take the 75.1 or 751 and just convert it to 75 so I can keep all my
touchpanels and iphone projects the same?

I am thinking there is an easy way but its slipping my mind.

Thanks for any help

Jon

------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links
Re: Degree symbol ASCII on TP (non-core 3)

 

I just opened up a tstat panel and I have no idea what symbol/letter/number cretsron used to get it. But my thinking is you could copy and paste it into simpl to add on to the end of the string. It will copy n paste to notepad, so it should do the same on a string.

--- In Crestron@..., Heath Volmer <hvolmer@...> wrote:

If I use ASCII 248 on a TP (or Crestron Mobile in this case) I get an
empty-set, or null symbol, not a degree like I expect. Is it possible to
get a degree symbol on a TP or Mobile?


Thanks, Heath


[Non-text portions of this message have been removed]
Degree symbol ASCII on TP (non-core 3)

Heath Volmer
 

If I use ASCII 248 on a TP (or Crestron Mobile in this case) I get an
empty-set, or null symbol, not a degree like I expect. Is it possible to
get a degree symbol on a TP or Mobile?


Thanks, Heath
Re: Tstat change 74,3 degrees to 74

Heath Volmer
 

If this is an analog - 751 represents 75.1 - a DivMod by 10 will chop off
the decimal. Ignore the remainder output. It doesn't round up though.

On Sun, Sep 16, 2012 at 12:17 PM, Jon <fueler1@...> wrote:

**


Hi all,

I just changed my house from a HAI thermostat that output nice even
numbers like 74 or 76 degrees to the CHV-TSTAT and it outputs 74.3 or 75.1

Is there an easy thing like a ascale with the right settings that will
take the 75.1 or 751 and just convert it to 75 so I can keep all my
touchpanels and iphone projects the same?

I am thinking there is an easy way but its slipping my mind.

Thanks for any help

Jon
Re: Tstat change 74,3 degrees to 74

Chip
 

If you don't care about the tenths at all, just run it through a DIVMOD...

- Chip

--- In Crestron@..., "Jon" <fueler1@...> wrote:

Hi all,

I just changed my house from a HAI thermostat that output nice even numbers like 74 or 76 degrees to the CHV-TSTAT and it outputs 74.3 or 75.1

Is there an easy thing like a ascale with the right settings that will take the 75.1 or 751 and just convert it to 75 so I can keep all my touchpanels and iphone projects the same?

I am thinking there is an easy way but its slipping my mind.

Thanks for any help

Jon
Re: Tstat change 74,3 degrees to 74

Heather Baiman
 

If you dig through the Crestron TSTAT module, you will find a piece of simpl+ that does this for you (rounds to the nearest whole number)

________________________________

From: Crestron@... on behalf of Jon
Sent: Sun 9/16/2012 2:17 PM
To: Crestron@...
Subject: [Crestron] Tstat change 74,3 degrees to 74



Hi all,

I just changed my house from a HAI thermostat that output nice even numbers like 74 or 76 degrees to the CHV-TSTAT and it outputs 74.3 or 75.1

Is there an easy thing like a ascale with the right settings that will take the 75.1 or 751 and just convert it to 75 so I can keep all my touchpanels and iphone projects the same?

I am thinking there is an easy way but its slipping my mind.

Thanks for any help

Jon



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links
Tstat change 74,3 degrees to 74

 

Hi all,

I just changed my house from a HAI thermostat that output nice even numbers like 74 or 76 degrees to the CHV-TSTAT and it outputs 74.3 or 75.1

Is there an easy thing like a ascale with the right settings that will take the 75.1 or 751 and just convert it to 75 so I can keep all my touchpanels and iphone projects the same?

I am thinking there is an easy way but its slipping my mind.

Thanks for any help

Jon
Re: apple tv control methods

 

The really great part is he did not password protect the module, so you can at least go in and make adjustments for your needs. I thank those that do not password the modules, so others can modify and learn from what has been done. :)

--- In Crestron@..., "Etienne" <etienne@...> wrote:

I've managed to get the ATV back up-and-running by disconnecting the LAN cable and streaming via Wi-Fi, thus not being controlled from Crestron. I could then access the Maintenance menu again, ext. I then reconnected the LAN cable to test again and found the following:

1) Song title not displayed correctly, ex: should be: (Don't Go Back To) Rockville is showing as: (Don&apos;t Go Back To) Rockville
I had the same issue with 'o Solo Mia

2) Scrolling up/down a list of media requires double presses

3) Sometimes the title (name$) doesn't update, but the artist, album and album art did.

4) Selecting a movie after listening to music doesn't clear the artist and album text fields. Would also be great if the album art would clear if there was no album art, like it displays "Nothing playing" when nothing is playing. It then clears the fields.

5) Ffwd and rew works perfectly when watching movies.


The aTV Flash (black) 2.0 Media Player also has metadata fetching enabled and it will start displaying pictures from the current playing artist, ext. I wonder it this doesn't put my crappy network under stress. However with it disabled the album art doesn't update.
OT: Awesome Spec

 

I was googing the for a spec sheet on a Leviton product I was considering to tidy up the CATV DEMAC and I came across a division 16 construction spec.

That looks pretty normal. Until you get to Section 3.4:


3.4 INSTALLATION OF DOOR BELL



A. Install doorbell buttons at front door. Install chime as directed.



B. Acceptance Tests: Utilize certified doorbell testing service with a minimum 15 years professional experience. Test all button locations simultaneously with the following protocol. At 3:21 AM, the night after Owner has moved in, depress button with 2.24 lbs. of lateral force while wearing a black ski mask and carrying a 24" blood stained axe. Repeat this action until Owner answers the door. If no one answers door, determine if bell is active and continue testing.



My first thought as I was reading is "there are certified doorbell testing services?" then I kept reading.
--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
Crestron Authorized Independent Programmer
91541 - 91560 of 256455