开云体育

Yeah, well.. I'm at a service call that I should have left 3 hours ago.? The old AVR was RS232, So I would have liked to use that instead of trying to get a LAN Cable to the Device. WiFi is not

I have always used the IP version. Its in the files section - Sony STR-ZAxx v1.1_archive.zip ( /g/crestron/files/Sony%20STR-ZAxx%20v1.1_archive.zip ) Again, everything works great

Greg_B, Which R232 Module is that? I'm not seeing one.

Wouldn't v1.007 be a downgrade from the device's current firmware? -- Josh Winn The LiquidPixel Group

Hi All, For those who might have tried this, iPORT had an interface module (72101) that provides not only POE, but also ethernet for iPads when they are docked. If you have used them have you had any

The Crestron Simpl# library works fine for PTZ and for getting media URLS, I’ve used it successfully on several different camera models.

Ive been looking into this as well over the years. Seems Crestron only cares about Home + Onvif (if and when it works) and doesn't care to work on getting the Simp/# side a way to do it consistently

Dear Team, Can any share the serial module or command for LG STB-6500. Regards, V.Sudhakar udhayan wrote:

I recently acquired one of these units for my home lab (I'm an AV programmer) and I'm having an issue with updating the firmware on it. It currently has the old v1.011.0028 (Sept.2015) firmware on it,

Thanks all!!? That solves my issue!!? If they still want to go that way, my dev price will keep going up until they say 'No Mas, No Mas!!!'...:) Matt Jones - Its an interesting RS Article as it

. . . I just spoke with them and am actually shocked that they don't have any module/interfaces for their products particularly since they've been around 10+ years... This sounds like an excellent

I don’t have anything positive to say about FR. That’s all I have to say about that.

We tried it for a minute years ago when video servers started to be a thing. In our opinion, it had its problems and we stuck with Request. In the last few years we haven't really done many movie

I've only seen Fusion Research used in systems a few times, but have never been impressed. I'm sure there are Crestron modules available, but the last one I personally worked with was over 10 years

I have a dealer that I do programming for that is looking to start using FR (he's not happy with the other main options...). This project is primarily Music, but might be interested in video as

On a Large University network I have no idea what its connected to or what its IP is or if we can even reach it. I'm getting a response from it every-time the modules communicating signal goes high it

Why are you not using IP for control?

It can be a PITA if the shade installer didn't set up the groups correctly. What happens if you open up a browser and try to control the shades?

Hello I am integrating a CP4N using 232 and UAI+ on Port1 using 1.5 Modules I get a response when its communicating with what appears to be a list of motors which matches what i received from the

I get my group posts by email.? There was no indication of the (also dinosaur) post to which you were replying, or that it was even a reply as opposed to a new post. The salient point, as you seem to