Re: Windows 10 indexing error?
I found this, it helped with my system when it was taking ages to create a new folder. It may help with this problem??
- Unless you want to do a fresh install of Windows then it will clear
up some of your problems. If not, there's a lot of junk that was carried
over from the previous Windows. One of them is Windows.edb (Search index database). Open the services, temporarily disable Windows Search service. Turn
on the folder options to show hidden files and navigate to:
C:\ProgramData\Microsoft\Search\Data\Applications\Windows
and delete
Windows.edb
Go back to services and re-enable Windows Search
to automatic and let Windows rebuild the search index database
?
|
Re: Adding a new device to a project
Try copying the module to the same folder as your .smw and reload. The notes for the module may be wrong. Can you open the module and check that it is both 2 & 3 series?
|
Maximum IR files on a port
What is the limit of IR files on a single IR port? There will only ever be a single IR controlled device on each port but it must be configurable at run time.
The scenario is a fully configurable program, on the touch panel I can select from a list of IR controlled devices and assign them to any port, the problem is that you cannot dynamically load IR files so my SIMPL program has to have every possible IR file loaded into every possible port and then the program uses crosspoint to route the controls to the correct driver file.
It has to run on 2 and 3 series processors so I don't have the option of S#.
I'm currently up to 5 IR files on each IR port but expect to add many more devices as needed, I am wondering when I will hit the limit and what will happen once I hit the limit. Is it a memory limitation or does SIMPL stop letting me drop IR files onto the port?
|
Re: Adding a new device to a project
I need it for a project on a Pro2, but the module is compatible with both 2 and 3-series according to the notes.
?- Dave
|
Re: Adding a new device to a project
Has the module been configured for both 2 and 3 series processors?
?
I have an old project I'm working on where I need to swap the AVR for a new Anthem serial-controlled model.? I have the .umc file and I copied it to the SIMPL/USRMACRO directory, but I can't get it to appear in the User Devices list, even after reloading the libraries from disk and rebuilding the database.
I confirmed that I'm using the correct directory for user modules.
What am I missing?
?- Dave
|
Adding a new device to a project
I have an old project I'm working on where I need to swap the AVR for a new Anthem serial-controlled model.? I have the .umc file and I copied it to the SIMPL/USRMACRO directory, but I can't get it to appear in the User Devices list, even after reloading the libraries from disk and rebuilding the database. I confirmed that I'm using the correct directory for user modules. What am I missing? ?- Dave
|
Thanks Jason - I didn't realize that was an option and definitely makes it the preferable choice.
|
Re: Windows 10 indexing error?
Crestron is aware of the symlib.tio error which has been around for several months now. Pretty sure it affects all windows versions. For me it happens on Win7 and simply closing Simpl and re-opening makes it go away.
________________________________________
From: Crestron@... [Crestron@...]
Sent: Sunday, February 21, 2016 4:21 AM
To: Crestron@...
Subject: [Crestron] Windows 10 indexing error?
I am getting a weird intermittent error in Simpl, it happens ¡®sometimes¡¯ when opening a module (i haven¡¯t seen it when opening a .smw) or re-synching a program. An error message appears saying ¡°Couldn¡¯t open file : c:\Program Files (x86)\Crestron\CresDB\Programming\symlib.tio - Be sure that the system indexing service is is disabled for SIMPL working directory ¡°smpwinWK¡±¡±
To remove any uncertainty, I have completely disabled the indexing service in Windows 10 but am still seeing this, so it clearly has nothing to do with that. I have removed, rebooted and reinstalled SIMPL, but it hasn¡¯t helped. I have also tried running SIMPL (and Toolbox) in compatibility mode with Windows 8, to no avail. I am not saving anything to a Dropbox or SpiderOak monitored directory¡¡.
Does anyone have any idea what might going on?
------------------------------------
Posted by: Marc Nield <marc@...>
------------------------------------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the Database area.
------------------------------------
Yahoo Groups Links
============================================================================
Please refer to
for important disclosures regarding this electronic communication.
============================================================================
|
Re: Windows 10 indexing error?
Yes I have the same problem on Win7 after updating simpl and databases, contact Crestron to put some pressure on a solution (they are aware of the problem, but no time frame for a solution, last I checked)
|
Hi group,
It appears that there still is trouble with Panasonic cameras.
I'll soon have to control (PTZ and presets) 39 AW-HE40 via IP.
If someone? have a working module or any tips for this specific reference, he will deserves a drink or more if he come to Lyon (France).
Best regards.
Matthieu
|
Crestron & Mobotix SIP serwer
Can someone please help with some advice how to connect Crestron and Mobotix S14 using SIP serwer? I want to do this on iPad ( Crestron app) and on the mobotix camera model S14. On visualization Crestron ( iPad) I want to use the reserved join. I made the connection between Crestron and Mobotix in VoIP setting in Crestron app. So when I choose "dial" a have audio connection and I can speak. But on my vizualization, when I call on the mobotix camera, I don't have any notifications like the reserved join dont't work. I wonder why this is so that the connection between the application Crestron and MOBOTIX working but visualization did not respond to the call from the intercom. Do I have to create a user for Mobotix sip server and connect it to the iPad where the application is Crestron?
|
|
|
Windows 10 indexing error?
I am getting a weird intermittent error in Simpl, it happens ¡®sometimes¡¯ when opening a module (i haven¡¯t seen it when opening a .smw) or re-synching a program. An error message appears saying ¡°Couldn¡¯t open file : c:\Program Files (x86)\Crestron\CresDB\Programming\symlib.tio - Be sure that the system indexing service is is disabled for SIMPL working directory ¡°smpwinWK¡±¡±
To remove any uncertainty, I have completely disabled the indexing service in Windows 10 but am still seeing this, so it clearly has nothing to do with that. I have removed, rebooted and reinstalled SIMPL, but it hasn¡¯t helped. I have also tried running SIMPL (and Toolbox) in compatibility mode with Windows 8, to no avail. I am not saving anything to a Dropbox or SpiderOak monitored directory¡¡.
Does anyone have any idea what might going on?
|
New file uploaded to Crestron
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the Crestron
group.
File : /Modules/srg-300.zip
Uploaded by : sopheap59700 <sopheap.ouk@...>
Description : Basic control for Visca Over IP camera
You can access this file at the URL:
To learn more about file sharing for your group, please visit:
Regards,
sopheap59700 <sopheap.ouk@...>
|
Re: Sony SRG-300H Camer over IP control.
Hello.
You have a setup utility for changing the ip of the camera (RM-IP10SetupTool.exe)
The module include only basic control (ptz and preset).
If you use my module, please send me a feedback,
Sopheap
De : Crestron@... [mailto:Crestron@...]
Envoy¨¦ : mercredi 10 f¨¦vrier 2016 01:14
? : Crestron@...
Objet : [Crestron] Re: Sony SRG-300H Camer over IP control.
Hi sopheap ouk, I have a problem to control through crestron processor and cannot change the IP for it as well. Would you be able to share your module for us? I appreciate it.
|
Re: BYOD Wireless display
Kramer Via was the old WowVision. I love Mersive Solstice!
Gary Schellhas
toggle quoted message
Show quoted text
On Feb 20, 2016, at 6:57 PM, mathew.klucznyk@... [Crestron] < Crestron@...> wrote:
?
I've had great success with Kramer VIA products, connect pro is built on Linux and the collage is windows based you can pretty much do whatever you want with them. They all support android/ios mirroring.
|
Re: BYOD Wireless display
I've had great success with Kramer VIA products, connect pro is built on Linux and the collage is windows based you can pretty much do whatever you want with them. They all support android/ios mirroring.
|
New file uploaded to Crestron
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the Crestron
group.
File : /Modules/MK - Analog Presets v1.0.zip
Uploaded by : matklucznyk <mathew.klucznyk@...>
Description : Saves and recalls analog presets with a name. Allows modifying values and preset name within preset. Dynamic List friendly.
You can access this file at the URL:
To learn more about file sharing for your group, please visit:
Regards,
matklucznyk <mathew.klucznyk@...>
|
Re: Is anybody having issue any crestron updates
Master Installer stopped working for me a few weeks ago on my Win 10
laptop.? I contacted TB and they sent me a beta they said fixed the
issue for everyone.? Didn't work for me :-(
toggle quoted message
Show quoted text
?
I having problem
installing or updating Crestron software in my PC,
Master Installer doesn't work no more and even when
I'm on Crestron website I download the new updates
after download it keep telling me The Signature Of
(what ever download i'm doing at the moment) is
corrupt or invalid.? I had never had this problem
before but starting getting for about a week now.?
Never had a problem with Windows 10 and Crestron this
is the first time.
On
Friday, February 19, 2016 7:55 PM, "f douglas
cavsfan198023@... [Crestron]"
wrote:
?
I've been using Windows 10
for a while now,? just ran Master
Installer yesterday and no issues
with my Crestron software.
On Friday,
February 19, 2016 4:55 AM,
"Mike Jobson
mike@...
[Crestron]"
wrote:
?
No
problems with
Windows 10 and
have been
running it since
the Tech Preview
|
To answer your question why "trace" is better than "print"...
Print is an older way of printing debug statements, and has been depreciated (although it still works).
Trace is newer, and replaces print, and specifically used for debugging purposes.? The biggest advantage I'm aware of, is that it can be turned on/off with a simple pre-processor flag.? You can sprinkle "trace" statements all over in your program for devolopment, and use the flag "#ENABLE_TRACE" in the module header to make them active.? When you are done developing/testing the module, you can then turn off tracing, and the trace statements stop outputting (but are still in the code, so later you can turn them on if needed).
This makes it fast and easy to stop debugging statements from getting outputted to debugger/console, and you don't have to go through and remove a bunch of individual print statements to get the trace output to stop.
You could do something similar with print, but you would have to do it manually by using "If (iDebug) Then Print (...)" everywhere, where iDebug would be a constant in the program set to on/off.? This is how I've done debugging in the past and with other manufacturers, but the built-in Trace statement handles this easier and cleaner with the pre-processor flag.
-jason
|
