开云体育

So, UPDATE, for anyone else trying to get these to work. There is apparently a service menu on the particular display I am working with that includes a setting for 'auto off' when no video is present.

This has been fixed in Smart Graphics 2.12.12.3 FYI and was released 2/22/17

Have you found a solution to this?

Hi all. I have been asked to do a remote programming change for the installation a a Ravo Arabic streaming box. I don't suppose anyone has the IR files for this unit. Many Thanks in advance.

Good idea. I will look into it. thank you

Not sure if it will work for you but you can get a trigger from something like an Awair monitor that there is high CO2 through IFTTT. IFTTT supports a number of air monitoring devices. Jay

I've heard that MS is very strict on the UI for S4B, that is the reason that RL2 has to "flip" between S4B control and room control. I haven't been very impressed on the S4B UI in RL2 myself, has some

Hello Can someone refer reliable carbon-dioxide sensor that is readable by Crestron. Need to measure indoor CO2 levels to activate Fresh AIR system. DV

I have my own module I've been using for the dozens of Sharps I've done, and until recently that's pretty much all we've used. I have an "enable polling" digital I almost never use, with a pacing

I don't believe in luck but apparently I jinxed myself. Two more went down today, but at least they're only (both) in a private executive conference room...

Hi Jay, thanks very much, you just saved my day! Your template is great! It helped me a lot!

So, i'm coding a system with two 3x3 walls of LG 49VL5B displays. Lg commands seem to be somewhat straightforward, but the tile commands do not seem to be responding correctly. I'm only doing three

https://www.youtube.com/watch?v=WiRBzzz51os LG double sided display. ----------------- David Allred Brigham Young University Office of Information Technology AV Engineering 1113 ITB Provo, UT 84602

FYI, the issue with muting seems to be related to using the mute toggle function as it starts polling for mute status after muting audio. I tried using the discrete mute functions which doesn't seem

In the free module open XBMCMain.usp and find the line that says // DEBUG = 1. Uncomment that line and in Debugger you will see the text of each command as it goes over the wire. Neil

I found a better example - right from Philips. It looks like maybe their newer bulbs support a better range - when I made my hue module, the "Gamut B" (seriously constrained) was the only one

"?What's XY? I have C code for HSV2RGB that has worked well for me." It's the 2D representation of color space.

I pulled the volume logic out of the LC 70LE745U module in the data base and expanded it from 0-60 to 0-100 and that seems to work well. Using the modules' mute function seemed to cause the module to

what brand of cameras? we have 50 up and 50 down, bandwidth should not be the problem here. ---In Crestron@..., <ComeAlive@...> wrote : Just curious what their UPLOAD side is. Just checked

Lincoln, I think the one feature that Groups offers that other platforms don't is the email one you mentioned. Surprisingly, I still do 'digest mode' so my email doesn't get flooded with individual,