Magewell USB Fusion
Hello everyone, Has anyone controlled a Magewell USB Fusion? I?m fighting with it and? i?m not sure how to connect to it be able to make input changes. Any help will be greatly appreciated. Thank
By
Juan Lopez
·
#253445
·
|
Re: Sonos control is still working?
The fact that you can just drop in an Autonomics hardware definition just like a touch panel tells me everything. I am not joking when I say for six months the Sonos did not work for more than 3 days
By
Crestron_Programmer
·
#253444
·
|
Re: Bond Bridge
Jay, Have you experienced any problems with your Bond integration? My Bond bridge pro updated FW to 4.4.7.1 and now I get this message: 06:47:07 - 05-06-2024 ? ?Bond-Get_Devices_List - Error Getting
By
Jay R.
·
#253443
·
|
Re: I'm losing my mind USB to C cables
The USB-C cable usually isn't directional but the cable and connector supports a whole lot of "features" that appear to be getting in the way.? I have some USB-C serial devices that won't work on Mac
By
Michael Caldwell-Waller
·
#253442
·
|
I'm losing my mind USB to C cables
I am trying to connect a external USB capture card to a Mac with only USB C ports on the rear.? The card is powered by the USB port.? The device came with a straight USB cable but I had 2 USB to C
By
stefuel2
·
#253441
·
|
Re: HZ2 for 5 or 6way Lighting Load Circuit
I would defer to Furman support, but I would think its not an issue. I don't use Furman personally. Keep us posted...
By
ckangis
·
#253440
·
|
Re: HZ2 for 5 or 6way Lighting Load Circuit
FYI there is no such thing as a 5 or a 6 way circuit, you only have single, 3 and 4 way. On a 4 way circuit, both end switches will be 3 way switches and everything between with be a 4 way. If you
By
Eric Luckart
·
#253439
·
|
Re: HZ2 for 5 or 6way Lighting Load Circuit
Hi Chris! Thanks for the reply. ?I suppose the Furman 1500 UPS is as good for a Crestron Pro4 as it is for my Trinnov 32... ?I also have 2 Furman Elite 20's, in place and although off topic a bit
By
@FURY1996
·
#253438
·
|
Re: Sonos control is still working?
I agree with CO Cowboy. Autonomics is a great industry partner (opposite to Sonos...). Their integration is solid. Using the MPO is quite good, and you still have the ability to completely roll your
By
ckangis
·
#253437
·
|
Re: Sonos control is still working?
Okay now this is getting even more odd. I love the autonomics, even more than sonos. If I had my way, I would put an autonomics in every job. Okay, okay... We have had our share of failed soundcards.
By
CO Cowboy
·
#253436
·
Edited
|
Re: Sensibo x Crestron Home
I¡¯m having exactly the same issue. It¡¯d be great if the guys at LLC could chime in and hopefully steer us in the right direction to solve this issue thanks a lot in advance
By
fvalenzi@...
·
#253435
·
|
Re: Marantz Cinema 70s IP Control?
Brilliant, thank you Tony. [email protected]> wrote:
By
Jeremy Weatherford
·
#253434
·
|
Re: Marantz Cinema 70s IP Control?
I just uploaded "Marantz_FY21_SR8015_SR7015_PROTOCOL_V01.xls" to the group's Files area, although there was already a slightly older doc there. They're probably the same. I've done a couple systems
By
Tony Golden
·
#253433
·
|
Re: Marantz Cinema 70s IP Control?
Denon/marantz avr family works well NFH
By
nicofreda
·
#253432
·
|
Re: Marantz Cinema 70s IP Control?
I'm not super familiar with Marantz gear - what protocol specifically should I be looking for? Thanks.
By
Jeremy Weatherford
·
#253431
·
|
Re: Sonos control is still working?
RIP out Sonos and put in Autonomics? Wow, talk about out of the frying pan and in to the fire.
By
rickwookie
·
#253430
·
|
Rollease driver not loading after processor reboot
#crestronhome
#cp4r
After processor reboot, control of shades is lost. The Rollease Hub 2 still shows online but all shades associated report "Driver failed to load". Each shade then has to be reassigned to the room and
By
stevenfink1967@...
·
#253429
·
|
Re: Sonos control is still working?
@Steve Kuehn that is an interesting point about WiFi on Sonos. I will test this theory soon after we rip out Sonos and put in Autonomics, maybe that was an issue all along.
By
Crestron_Programmer
·
#253428
·
|
Re: Is matt_rasmussen_2000 still around here? Roku module help needed
Ah I dont think I ever noticed him posting there. I'll message him there. Thanks!
By
@johnmax
·
#253427
·
|
DMPS-300-C telnet control video board
is it possible to control dmps-300-c video board from telnet? trying to set : C2I-DMPS-300-VIDEO>setvideoroute 02 17 and nothing happens
By
uoi.conf.center@...
·
#253426
·
|