¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
TSR-310 - What are the actual best Wi-Fi practices?

 

I would like to get to the bottom of this debacle once and for all!!!!!!!
So, if someone from True Blue could chime in also, that would be fan-freakin'-tastic.
?
One of my installation team just got off the phone with TB support, and yet again received different "this is how it should be" information.
It seems like every support agent at TB has a different idea of how it should be done!
?
Here's what I think that I know:
  1. TSR-310s with Latest Firmware (I'm talking numerous devices, 10+)
    • Only 1 SSID selected and set as the preferred network.
    • Wireless Band 5GHz selected as the only band allowed in the new band selection tab.
    • No roaming whatsoever.
  2. Access Points
    • Dedicated "remotes" SSID only for TSR-310 use
      • 5GHz band only
      • WPA2 PSK AES only
      • 40 MHz maximum channel bandwidth
      • No fast-roaming support
      • No band steering
The Crestron TB support agent stated that every single remote needs its own unique SSID.
This is completely insane and ridiculous!
So, does that mean that in an installation with 15 TSR-310 remotes (not out of the ordinary), we need to have 15 unique SSIDs just for the remotes?
Crestron Home maximum device support states 24 TSR-310s on a CP4-R ... so, we need 24 unique SSIDs????!!!!!
?
What this means for most large installations with numerous access points managed from a single portal is that they have to be removed from the portal and managed on an individual basis.
For example, AP01 has remotes-01 SSID and remotes-02 SSID, AP02 has remotes-03 SSID, AP03 has remotes-04 SSID and remotes-05 SSID, etc., etc., all the way to remotes-15 SSID.
Access points managed from a single portal are generally limited in the number of unique SSIDs allowed and most are added to all APs in the installation.
Does this mean that we can back-charge Crestron for all of the configuration time for all of the APs with SSIDs and VLANs to set up?
?
Also, if this really is the case, Crestron, where the hell is the document detailing exactly how it "should" be done?
... and it doesn't count if it was once available in some release notes in one firmware release 9 months ago!
... and it doesn't mean this is how it should be done in a lab with one remote and one AP.
How should it be done in the real world with 15 remotes, 10 APs, 5 gateways, a microwave, 5GHz cordless phones, a cell repeater system, grandma's hearing aids, etc.??
You have an NVX switch configuration best practices document that details what is generally needed for IGMP/multicast support, etc.
Where is it for the remotes?
?
We're about to just stop using all Crestron branded touch screen remotes forever.
?
If Ava with the help of any developers could get their new "Cinema Remote" to work with Crestron custom and Home, then it would be all over for TSR-310s.
I've already spoken with their team and given my wish list regarding how it could/should work with Simpl.
It's all about letting us control that beautiful screen with dynamic wheel.
?
Sorry for the rant!
Please help,
Brian
Samsung Frame CEC Volume Commands

 

Does anyone know CEC commands for volume control on Samsung Frame TVs?
?
?
Thanks in advance
Avtar
Re: Anyone noticing slowdowns/failures in loading to 4-series processors lately?

 

I'd like to thank the 4-Series and Toolbox for provide the opportunity to wait more than work.
For giving me ample time to brew and drink coffee in the morning and? to also pull out my hair when that "last minute" change takes forever to get the processor responsive and updated.
?
Good times...
Re: TV Presets v2.0

 

That is essentially how the TV Presets Channel Control v1.0 works but I know some Crestron modules can be polluted with over programming. I will try to use Simpl logic over the module to accomplish this. Thanks
Re: TV Presets v2.0

 

Debugger shows correct data. Channel number and IR Pulses
Re: Resideo / Honeywell WiFi Thermostat

 

Does it have an API/documentation?
?
Michael
Re: Vogel¡¯s Motorized TV mount IR codes

 
Edited

Thanks for the reply but they actually have and IP module and it works great. ?One of the best motorized mount I ever used. ?Sleek quiet with preset etc . ?only thing is o don¡¯t think they sell there motorizes mounts in the US. ?i got from out of the country. ?I will give them a call to see if they get the motorized mounts because i plan on using it again.
Re: TV Presets v2.0

 

Are you sure its the presets module, or could it be your IR driver sending out the double pulses? Do the double pulses show up in debugger coming out of the presets module? We use them on every job and havent seen this behavior.?
Re: BLUE STAR CASSETTE AC IR Learn issue

 

i tried this all methods and no hex code is given from blue star


On Mon, Jul 22, 2024 at 7:42?PM MQSACK via <mqsack=[email protected]> wrote:
Have you tried pulse IR?
?
Is that IR command a multi-mode code?
?
Do you have the source HEX code anywhere from Blue Star that you can try pasting in as opposed to learning it?
Re: TV Presets v2.0

 

Are you working in Simpl or CH?
?
I work in Simpl and use a Serial to Analog 16bit, take that analog value and feed it into a keypad decoder 12 module. Some other small logic after that, but the keypad module allows timing adjustments so that it doesn't miss digits (get 35 instead of 355) etc.
?
Jon
Re: Lutron QSX HVAC Module S+ Compile error

 

Resolved - had an outdated .clz - Jeff at CC flagged it
Re: Vogel¡¯s Motorized TV mount IR codes

 

Did you try calling their NJ distributor?
TV Presets v2.0

 

I am using TV Presets Profile Manager v2.0, TV Presets CRPC Interface v2.0 and TV Presets Channel Control v1.0 and when sending out channel numbers to IR Driver I am getting duplicate Numbers on occasion of "0" or previous selections doesnt clear and will send a long channel string.
Ex: I select channel "1002" and get this "10002" or select "1223" and channel doesnt change so I select channel "1103" and get "12231103".
?
Has anyone else experience this?
Re: Question: Easy way to convert a Crestron Mobile to Crestron App project??

 

¿ªÔÆÌåÓý

DM and we can check it out.
Nicolasfreda at
Hotmail

NFH

On 22 Jul 2024, at 9:32?a.m., mariusz via groups.io <mariusz@...> wrote:

?
I am looking for someone, that helps me (not for free) with converting my project. I don't have actual SIMPL and VTPro, but have converted VTPro project to Smart Graphics on my old VTPro, so now I need to add module in Simpl. Who can help me? :-)
Re: Question: Easy way to convert a Crestron Mobile to Crestron App project??

 

I am looking for someone, that helps me (not for free) with converting my project. I don't have actual SIMPL and VTPro, but have converted VTPro project to Smart Graphics on my old VTPro, so now I need to add module in Simpl. Who can help me? :-)
Vogel¡¯s Motorized TV mount IR codes

 

Does anyone have infrared ?codes for Vogel¡¯s motorized tv mount. ?on site and don¡¯t have a ir learner with me. ?Thanks for your help
Re: BLUE STAR CASSETTE AC IR Learn issue

 

Have you tried pulse IR?
?
Is that IR command a multi-mode code?
?
Do you have the source HEX code anywhere from Blue Star that you can try pasting in as opposed to learning it?
Lutron QSX HVAC Module S+ Compile error

 

Anyone know how to fix this syntax error? This S+ module fails to compile based on this line:
?
ThirdPartyHvacComponent component;
Module is: Lutron HomeWorks QSX Single SetPoint 3rd Party HVAC Control written by Control Concepts
?
Images here:
?
?
Matt
Re: Monitoring Systems (Like OVRC and Domotz)

 

OVRC has it's quirks, but if you put a Pro Hub on-site it usually gets the job done for me.
?
That said, I also usually have remote desktop and/or VPN access to all my sites as well.
Re: Timeout to Start Login page.

 

OK. I tried that, and it looks nice, but like my other previous attempts, I can't seem to tie it in to the right thing to make it go to the Start Page.
I even tied it to a hidden button w/ a Digital press # on the TP, but now they both say that they have no destination.
Like I said, it may be obvious to everyone but me, as I'm still pretty green.
Hint?
?
2581 - 2600 of 256448