开云体育

Hi, Crestron App 105.50.0 is installed but it is not communicating with controller after updated IPad IOS.both controller and ipad are on the same network subnet and able to ping via toolbox text

Thanks guys appreciated your thoughts on this, I’ll post some more detail on what I’m trying to achieve later tonight. Thank you, Paul Bell (PH) 0408465561 28 Ford St, Salamander Bay, NSW 2317

The documentation for creating AV Switcher drivers only gives a vague example of how the routable inputs and outputs should be defined in the json file.? Could someone post an example of that node?

Thanks there is a Crestron ccd driver Question is how reliable does the connection stay if there is power outage or other issues does it require the remote to say ok

Do you happen to know the commands for controlling specific outlet on a KP400?? The commands from the module turns both outlets on/off.

I have two MC3 units that seem to have the SD card issue. Would someone send me the SD image or point me to someplace I can get it please? Is it a good idea to take an image and replace the SD cards

Interesting that a USB-EXT-DM-LOCAL worked, where NVX to NVX did not. Ours are all NVX-360s. USB 2.0 has a theoretical max of 480 Mbps anyway. I don't know what's going on in these units that is

Thanks MSTC! I guess I should have checked with hidhelp all.

Sorry, I went and looked for them and I can’t find them. Here is from a 1070 console TSW-1070>sonos ? SONOS [ ENABLE | DISABLE | LAUNCH ] ??????????????? This command enables/disables

The console commands were recently posted here. I was quite alarmed to hear the new TSW-1070 panels have the builtin Sonos app enabled by default. Of course my clients discovered it by pressing the

I was quite alarmed to hear the new TSW-1070 panels have the builtin Sonos app enabled by default.? Of course my clients discovered it by pressing the Sonos icon from within the Media Player.? After

Haven’t noticed any issues, whether trying to connect via my iPad or iPhone.? I have been able to ?connect to both of my residences as well as client sites, all while sitting on the beach in Key

Yeah it wasn't until recently I noticed it has been slow prior was ok

The thought when I saw the OP wasn’t so much merging two points of control but perhaps the OP has a venue with Crestron house lighting (or other Crestron-ecosystem-type-things) that they want to be

We use the Shure P300 a lot for a single device interface and had good success with it. ?We'll probably use the QSYS Core I/O more now that its finally MTR Certified. If you try and use something not

Maybe I'm not understanding correctly, but it shouldn't be required. If you want a lighting controller AND Crestron to control lights, you can: A.) Feed the controller into the Crestron program and

That's good to know, and I agree, it doesn't make a lot of sense. I am already using adaptive bit rate, and EDID is set to 1080p/60, so a user's video connection is only in the 360-400Mbps range

Exactly what I was looking for. Thanks!.

Check here, then check back often: Microsoft Teams Rooms requirements - Microsoft Teams | | | | | | | | | | | Microsoft Teams Rooms requirements - Microsoft Teams Learn about the requirements for

I'm glad I could help, by accident!!...:) Yeah, I just happened to see the new device symbol one day - there's no discussion about it in the tech support camps... FTR, I have projects with both the Go