开云体育

Hey, I am having a heck of a time trying to format these commands, I'm not great at figuring those out. Can anyone show me some examples of how it should be done? Thanks!

easiest way, You need to access the room control in the codec and add the panel from there. also, you can download the room control editor from Cisco but you need to know the software running as it

Dave is correct. This is a known issue and has been for several years. It has to do with Windows handles. The way it was explained to me by ATSG is that eventually the processor runs out of handles to

So how do you actually edit the Touch 10 UI? Is it a program you download?

I haven't heard of issues recently as you describe. Overall most of our systems are fairly stable for months then needing a proc reboot. We're going to a 2nd slot model for the Sonos modules so that

Interesting. This isn’t an issue that I’ve seen before and have a few Crestron + Sonos systems out there. I've been seeing API exception errors in debugger and wondering if this is because

Yes, there is an issue between Crestron and Sonos, but it has nothing to do with the S2 or S1. Basically, over time, the system errors out and looses connection. To get it back, the processor will

I don't suppose anyone has reverse engineered the Triad TS-AMS24?? It's the perfect solution 24x24 matrix.? The problem is they got bought out by Control 4 and they use it exclusively on their

+1 to the RTI CP-16i it’s plenty of power, sounds good, runs cool and only about 10 inches deep. Pretty reasonable price wise also.

with using S2 firmware.,there is a problem? then it is not possible to control it with the crestron version S2 best regards *Francisco R. Hernández H.* *Integration Systems* *Engineer Sales* *c: *+52

No issues here but using S1 firmware.

Have had 3 projects today suddenly lose the ablity for the Crestron to control the volume of Sonos equipment using the official module v.3.1.0. I know there was a large update to S2 a few days ago

Just copied this out of a working program. This is the exact string we have in a SIO being sent to the 2N panel. GET /api/io/ctrl?port=relay1&action=on HTTP/1.0\nHost: xxx.xxx.xxx.xxx\n\n

We?re doing high end cinemas. With a 200“ screen with 4K@60 4:2:2 you?ll see the difference. For these use cases we always do local attached sources, wouldn?t use NVX for that. The Crestron

FWIW even the 10G solutions do some compression, just at 10G you can to 4K in “mathematically lossless” vs “visually lossless” That said, at least for the use cases I’ve seen NVX applied I

I had a hunch it had to use some sort of lossy compression. Of course, the HDBase-T technology that DM uses doesn't have unlimited bandwidth either. From what I've read it's limited to 10Gbps or

It does lossy compression, otherwise it wouldn?t be possible to get it over a 1GB link. At least for video content. AFAIR it uses MPEG2000. Cheers, Thorsten Von: [email protected]

So I've been running across this NOTICE quite a bit recently and wasn't able to quite track down where this NOTICE was coming from.? It doesn't exactly give you an idea of which module and in

That's good to hear, but the rest of the DM line still doesn't support it, unfortunately. This makes it difficult to do things like share an AppleTV 4K with multiple rooms if 1 or more has a Dolby

I have an RTI 16i amplifier running my house. I had to use it due to rack space, it’s 16ch, 1RU and 9” deep. Not the greatest of amps but can easily keep up with the snapav stuff. you can get them