开云体育

anyone else have problems with the air gap switch getting stuck in the open position, I think that people are just hitting the bottom of the switch to turn it off, and then on accident hit the airgap

Thanks, but that is rtsp I reached out to a smarty at Axis and they told me for mjpeg: http://user:pass@#.#.#.#/axis-cgi/mjpg/video.cgi?/streamprofile=profilename I was waiting till we get back on

rtsp://<user:pass>@<IP>/axis-media/media.amp?Profile='profile name'

If you are doing stereo, you can wire unbalanced to balanced on the DSP. Each channel gets their own input on the DSP. If you only need mono, you can use an OWI Amp-Stcomb with a RCA to 3.5mm TRS into

No, It can send out proprietary button press commands to a control system that can then in turn send out IP commands to a Display. The only display control a cisco codec has is CEC.

What are my options for connecting the DMC-4KZ-C-DSP (or any of the DMC cards) Audio output into an Avia 1280. I found the TX-J2 but would like to see what other options I have. I'm using the 8

With bypass on, nothing unusual happens when you load a program -- only that slot gets restarted. With bypass off, if you load Program1 and you also have a Program2 loaded, Toolbox will stop Program2

Has anyone used the new Crestron VC-4 Core yet? What's your experience like? Pros and Cons of it? Thank you.

Can a codec send out ip commands to turn on and off a display? on on Wake and off on Standby.

Hi All, Can someone explain what this actually means in the upload program window? "Bypass auto start/stop of dependent programs Thank you,

Got it. Thank you,

Will do. Thanks!

I only get a /x00 heartbeat string from the unit. Will not respond to any commands or queries.

Just to confirm what's already been said: The DACP protocol and the Bluetooth protocol are completely unrelated, so what you can do with one doesn't translate to feature parity for the other. The DACP

Check on Crestron labs, the module developer is quite active on replying to bug reports

Physically, yes. Logically, no. You just define it as a “normal” IP device and manually configure the IP table. -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems

Strange, I'm guessing there's a semi-public beta channel but 9.6 just came out publicly including 9.6.1 just yesterday. If you can get more info I (and others I'm sure) would be interested. Any ideas

Hi All, Can you add a DM-DGE-200-C to a DM output? Don't see that as an option in SIMPL Windows.

The system actually shows Rooms 2018-12-19 on the Touch10, but when I asked the client to check the SX80, they sent me an email with ce9.7.0.54ac0f80a97

The latest public firmware is 9.6 from what I see. Where do you see 9.7 or the release notes for it?