开云体育

What's your actual question? If you're trying to ask how to link the processors together You could turn the Rack2 into a Cresnet slave with the AV3 as the master. The other option is to use a COM port

hi guys, thanks for the reply but if only av2 has ethernet card and rack doesn't how will i do it? Thanks, Kenneth

I just ran into this same issue. (See my thread from a few weeks ago) I usually start with an Xpanel then save as to the other panels. I now only reference that Xpanel in my simple program no matter

Anyone know how to clear the current persistent log from console? My test bench MC3 processor is racking up an enormous log of mostly TCP Client errors from devices that don't exist in my test system

I did not have Studio installed, just tried and ran into the SQL Server install issue that is documented, I have now asked for the batch file that fixes the SQL Server install that will allow me to

I am running 8.0.2 on my Mini Retina and I have no issues adding a project, or editing text in any field.

Why is it that when ever I do a Save As with a TSW or other Smart Graphics panel, I have to go through all the Smart Graphics objects again and copy all the "old object" signals to the newly created

Even though it is not officially supported you can also hook up a TesiraFORTE over USB to a Crestron RL and actually have some decent audio for Lync conferencing. I have a few systems here running

Its not a pain for people with experience. My comment was a recommendation for him based on his question. I personally wouldn't recommend an MLX-3 for that scenario, because the operation (IMO) sucks

Fairly simple when you know how I would imagine... Can someone point me in the right direction so I can put together a module that writes log file for debugging? All I really need to know is how to

The canonical solution is two analog signals, one to represent the input and another to represent the output. If both analogs are set (determine this with ACOMP2 or EQU symbols ANDed together), send a

My Samsung 5000 series LCD developed a fault where it would not power on or if it did, it took ages. The power supply had some under rated capacitors that had started to fail, replaced them and it has

I Sincerely appreciate the reply. I left one thing out. When selecting your source and then selecting the output device it needs to trigger one command to switch an Intelix HDMI switcher to the right

Was thinking some kind of eco settings, till you said you were pushing buttons on device. It's the ultimate eco setting - you can't use the TV! Does it behave the same with nothing connected?

The fields for the alternate port (no big deal) and the code are missing, and the save button never becomes enabled. This is driving me crazy.

Er, I can't add new systems on Crestron mobile running over ios 8.

A buffer? Crestron@...> wrote:

Whats the best way to route multiple sources such as laptop 1, Laptop 2 and PC to dual displays? I thought I could use an AND symbol, but it did not work and I think due to having to keep both inputs

Figured it out. "Run As Administrator" did the trick.

I like doing a delay and logic wave pulse combo. Signal drives delay, and the trig* (not the normal trigger!) of the LWP. Then the output of the LWP drives the reset of the delay. Then, when the