¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: CHV-RSS Ohm Rating

 

It should be in the vacinity of 50k IIRC.
Re: Duplicating UI programming workflow in Simpl - Issues with CRPC Smart Graphics

 

Ha! I guess that's another built in "feature." I don't feel like it's 100% consistent though. This morning I was trying to recreate the "helpful" behavior your describing that got me yesterday, but this morning it wasn't moving them - just creating duplicates in a new folder.

I like the workflow though! Thanks for sharing!
Re: Duplicating UI programming workflow in Simpl - Issues with CRPC Smart Graphics

 

I generally do:
1) Duplicate Device Programming
2) Delete "Smart Graphics Modules" folder
3) Copy/rename logic folder

If you use duplicate on a device that already has connected modules, it "helpfully" moves all of your modules into the new folder...
Re: Samsung Frame CEC mismatches

 

I think Samsung has changed the behavior at some point. I don't remember what year, but I'm pretty sure originally, CEC turned the Frame off completely. This years model goes to Art mode.
Re: Samsung Frame CEC mismatches

 

I've actually had the opposite problem - only being able to turn the Frames completely off via CEC, and not being able to get into Art Mode. However, it's been over a year since I actually tried it.

I'll test a couple of things on-site today, but would love it if someone already has specific commands that work reliably.

--- On Wednesday, March 8, 2023 at 5:16 AM, Joseph Clare wrote:

Just about pulling what is left of my hair out trying to deal with CEC control
of a Samsung Frame...

\x40\x04 works fine for on and I can select HDMI inputs fine

but when it comes to turning it off, the only CEC frame it will listen to is
\x40\x36 but that only puts it into ART mode, not actually off...

Has anyone else seen this and found an alternate for actually putting it into
standby?

I've tried \x40\x44\x6C and \x40\x44\x40 but no luck so far....

Thanks in advance for any help...

Joe
Duplicating UI programming workflow in Simpl - Issues with CRPC Smart Graphics

 

Has anyone figured out the secret sauce for duplicating UI programming in Simpl? I'm thinking specifically as it relates to CRPC stuff (Media Player Object, TV Presets, Pyng Lighting, and Pyng Shades). Do you right click, duplicate device programming hardware definitions first, then copy/paste/F9 UI programming in Logic folder? Logic folder then hardware definition?

I realize either way, I'm going to get the Smart Graphics Modules folder, but sometimes it changes the signal prefix from my tpXXX to Slot-05-IP-ID..etc... and sometimes it doesn't. I thought by having the logic folders and corresponding in place before duplicating the definitions, Simpl would keep my prefixes, but I'm not 100% sure about that.

The other thing I've had happen a couple times is Simpl deletes these modules (Media Server Object Router, TV Presets CRPC Interface, or CRPC Serial Client Interfaces) from my logic folders. I guess that wouldn't be a problem if my default behavior wasn't to immediately delete the newly created Smart Graphics Modules folder after all duplication/F9 stuff, but typically they're duplicates.

Just thought I'd poll the audience this morning to see if I'm going about this all wrong or if anyone has cracked the code on how to predict Simpl's behavior as it relates to duplicating UI programming with CRPC objects. TIA!

Jonathan
Re: Elusive Cisco Room Devices 4.0

 

?
?
?
Fixes/Changes from 217.00.003.00 to 217.05.001.00:?Release of Cisco Room Devices 6.0.3 Module

?
?
Re: Elusive Cisco Room Devices 4.0

 

The new v6.03 Cisco Room Devices module is now part of your Crestron database. Make sure your database is updated and you should find it in the "Crestron Modules -> Conferencing" folder in SIMPL.
Re: Elusive Cisco Room Devices 4.0

 
Edited

On Fri, Mar 10, 2023 at 08:47 AM, @johnmax wrote:
Thanks - I don't find this on their website either. Can you send a link to it?
Re: Elusive Cisco Room Devices 4.0

 

Crestron just released a new Cisco Room Devices demo program yesterday. Get it at Crestron.com
Elusive Cisco Room Devices 4.0

 

Good morning group -

We are working on a project with a Cisco WebEx Room Kit Plus and I have seen reference to the?Cisco Room Devices 4.0 module on Marketplace and I cannot seem to find this module.? I have the?Cisco Room Devices 3.4 module (which will not compile due to outdated dependencies).? Does anyone have the?Cisco Room Devices 4.0 module they can share or point me to the right location for this module?

Any assistance would be helpful.

Thanks -?
Re: Samsung Frame CEC mismatches

 

I havent had an issues with 232 commands turning the frame TVs off.
Re: CHV-RSS Ohm Rating

 

¿ªÔÆÌåÓý

Search the posts.? The RSS is not a resistive sensor.

?

From: <[email protected]> on behalf of miitchchapman <mitchell@...>
Reply-To: <[email protected]>
Date: Thursday, March 9, 2023 at 1:28 PM
To: <[email protected]>
Subject: [crestron] CHV-RSS Ohm Rating

?

Hi All?
Does anyone know what the OHM rating on CHV-RSS Slab Probe Is

All Help is greatly appreciated
Regards
Mitchell Chapman

Re: CHV-RSS Ohm Rating

 

All Crestron tstat sensors are data driven, which is why shielded cat is recommended by many. There is no ohm rating.
CHV-RSS Ohm Rating

 

Hi All?
Does anyone know what the OHM rating on CHV-RSS Slab Probe Is

All Help is greatly appreciated
Regards
Mitchell Chapman
Re: Samsung Frame CEC mismatches

 

Bruce you're a life saver, thanks so much.
?
Hopefully can return the advice one day.
?
Cheers!
?
Joe

On 09/03/2023 10:26 GMT Bruce Bartlett <bruceb@...> wrote:
?
?
The current generation of Samsung Frames can be reliably controlled using CEC, but your CEC source needs to be "unregistered". I suggest using the following:
?
Power on - \xF0\x04
Power off - \xF0\x36
?
However, on the latest generation of Samsung Frame, art mode should be considered the standard off state. The only way to get the TV into a "full off" state is a press and hold from the IR remote control.
?
If the TVs are in spaces where they need to be dark like bedrooms, then you will need to use the Samsung art settings to adjust when art is shown. There are settings for motion detection, ambient light level and if memory serves, time ranges as well.
?
Regards,
?
Bruce
?
?

Re: Samsung Frame CEC mismatches

 

The current generation of Samsung Frames can be reliably controlled using CEC, but your CEC source needs to be "unregistered". I suggest using the following:

Power on - \xF0\x04
Power off - \xF0\x36

However, on the latest generation of Samsung Frame, art mode should be considered the standard off state. The only way to get the TV into a "full off" state is a press and hold from the IR remote control.

If the TVs are in spaces where they need to be dark like bedrooms, then you will need to use the Samsung art settings to adjust when art is shown. There are settings for motion detection, ambient light level and if memory serves, time ranges as well.

Regards,

Bruce
Re: Samsung Frame CEC mismatches

 

Thanks Phil,
?
Afraid that's what we've tried along with everything else, have tried broadcast addresses and different source addresses to no avail.
?
Doesn't help that it seems like control via CEC is intermittent as well...
?
Hopefully lightning will strike and I'll either figure it out - or maybe take out the TVs so I can get in something better instead!
?
If anyone else has run across this and has a resolution - would be gratefully received....
?
Joe

On 08/03/2023 12:27 GMT Phil Bridges <gravityhammer@...> wrote:
?
?
IIRC on these you first have to select HDMI 1 and then power off.
?
On Wed, Mar 8, 2023, 5:15 AM Joseph Clare <joe@...> wrote:
?
Morning all,
Just about pulling what is left of my hair out trying to deal with CEC
control of a Samsung Frame...
\x40\x04 works fine for on and I can select HDMI inputs fine
but when it comes to turning it off, the only CEC frame it will listen to
is \x40\x36 but that only puts it into ART mode, not actually off...
Has anyone else seen this and found an alternate for actually putting it
into standby?
I've tried \x40\x44\x6C and \x40\x44\x40 but no luck so far....
Thanks in advance for any help...
Joe
?
?
?

Re: Firmware update issues with 3-series

 

Well, perfect timing...:(

New 3-series FW:
Resolved Bugs:
  • Resolved an issue where firmware upgrades would fail intermittently.
Re: How to get C# trigger a method based on event from Simpl+

 

I don't see any object references in that code, so it would be something in CalculateX or CalculateY.? If you can catch the exception in ButtonPress you can print the full stack trace to console, or you can use S# Debugging to trace it down more accurately.


On Tue, Feb 28, 2023 at 8:57?PM Brad Wykoff via <bradwykoff=[email protected]> wrote:
I've updated my code as follows:

C#
?public void ButtonPress(ushort localButtonPress)
? ? ? ? {
? ? ? ? ? ? ? //? localButtonPress = ButtonPressID;
? ? ? ? ? ? ? ? ButtonClickHandler(localButtonPress);
? ? ? ? ? ? ? ? CrestronConsole.PrintLine("Button Press is: {0}\n", localButtonPress);
? ? ? ? }
? ? ? ?
? ? ? ?
? ? ? ? public bool ButtonClickHandler(ushort buttonId)
? ? ? ? {
? ? ? ? ? ? CrestronConsole.PrintLine("ButtonClickHandler running and Button is {0}\n", buttonId);
? ? ? ? ? ? // Calculate the button's grid x,y
? ? ? ? ? ? int x = CalculateX(buttonId);
? ? ? ? ? ? int y = CalculateY(buttonId);
? ? ? ? ? ? CrestronConsole.PrintLine("Button {0} has x = {1} and y = {2}", buttonId, x, y);

? ? ? ? ? ?If(evaluateSomething)
? ? ? ? ? ?{
? ? ? ? ? ? ? ? ?// DoSomething
? ? ? ? ? ? }
? ? ? ? }



Simpl+
DIGITAL_INPUT playerPress[64];


push playerPress
{??
? ? ? integer x;
? ? ? x = getlastmodifiedarrayindex();
?
? ? ?_myGame.ButtonPress(x);? ??
}
?
Complies without any errors but get the following error in ErrorLog:
?Referencing _myGame.ButtonPress(x); Unhandled Exception: System.NullReferenceException: Object reference not set to an instance of an object
7361 - 7380 of 256446