¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Simpl Solution Only

 

same problem as scaler

--- In Crestron@..., Kool-Aid Drinker <herald@...> wrote:

I'd bet it could be done with log and antilog -- slide-rule style
multiplication and division via addition and subtraction.

On Mon, 25 Mar 2013 23:54:20 -0000, "Witmarquzot Dyrjuv"
<witmarquzotix@...> wrote:

Can't change the values during runtime

--- In Crestron@..., "eagrubbs" <eagrubbs@> wrote:

analog scaler? Wrapped in a module?

--- In Crestron@..., "Witmarquzot Dyrjuv" <witmarquzotix@> wrote:

I am looking for a way in simpl only if possible to expand an incoming set of values,
say 0 - 15385, to be a scale of 0 to 65535.

Rules:
Must be configurable during run time(ie the top or bottom of the scale may move)
without resetting the processor.
It must expand any set of values that falls between the scale of 0 to 1 and 0 to 65535,

Anyone got any ideas or am I going to have to bust out the simpl+?
More Lifesize Control Questions

 

I know many of the issues with the Lifesize crestron module and have modified it to serve as much of my needs as possible. Or so I thought....recently I had a request from a client to pull the meeting directory onto the touch panel, anyone run into this and come up with a solution?
Re: DM-MD6x6 and Surround Audio

 

Think that's just how it is. Dolby digital from say a sat or appletv will be fine as tv cams decode that. But blu ray, forget it

Sent from my pocket computer
Re: Simpl Solution Only

Kool-Aid Drinker
 

I'd bet it could be done with log and antilog -- slide-rule style
multiplication and division via addition and subtraction.

On Mon, 25 Mar 2013 23:54:20 -0000, "Witmarquzot Dyrjuv"
<witmarquzotix@...> wrote:

Can't change the values during runtime

--- In Crestron@..., "eagrubbs" <eagrubbs@...> wrote:

analog scaler? Wrapped in a module?

--- In Crestron@..., "Witmarquzot Dyrjuv" <witmarquzotix@> wrote:

I am looking for a way in simpl only if possible to expand an incoming set of values,
say 0 - 15385, to be a scale of 0 to 65535.

Rules:
Must be configurable during run time(ie the top or bottom of the scale may move)
without resetting the processor.
It must expand any set of values that falls between the scale of 0 to 1 and 0 to 65535,

Anyone got any ideas or am I going to have to bust out the simpl+?
Re: RTI T-1 Remote With Crestron System

 

St1550 or 1700

--- In Crestron@..., "cnaclerio6" <cnaclerio6@...> wrote:

Just use a 1way crestron remote in ur program and make sure the rfid is correct.

--- In Crestron@..., "emilbed1" <emilbed1@> wrote:

For a first time I've to program The RTI T-1 Remote On a Crestron System, I've use MX850 Before But The client Want to Switch to RTI T-1 I know That I've Have to Use CNRFGW 433 For Receiver But I don't Know What to Use Instead For the actual RF Remote in The device View Of SMPL.
Any Good Help Will Be Much Appreciated.
Re: New Crosspoint Symbols in last Database Update

 

Hi, are you using XGen processor?
?Cause this is the old XPoint, not the new one.
In the past, we used to have this "take" signal at xpoint.

Signed,
Rafael Costa

Em 25/03/2013 20:54, fredsmedgig escreveu:

So no one else is seeing these? They just popped up on my computer as
a fluke? Bah, how is this even possible? Same computer as I usually
use, made no changes. I assumed the last crestron DB update that I
applied last week added them in.

The Crosspoint symbols that appear in Studio match the ones that are
now visible for me in Simpl Windows. So now, I have 2 sets in the
Signal Routing folder. The old ones have a '.' suffix. The new symbols
are slightly different. For example, the Connect symbol only has CID,
EID and Take Inputs. Is that the one you were talking about?



[Non-text portions of this message have been removed]
Re: New Crosspoint Symbols in last Database Update

 

So no one else is seeing these? They just popped up on my computer as a fluke? Bah, how is this even possible? Same computer as I usually use, made no changes. I assumed the last crestron DB update that I applied last week added them in.

The Crosspoint symbols that appear in Studio match the ones that are now visible for me in Simpl Windows. So now, I have 2 sets in the Signal Routing folder. The old ones have a '.' suffix. The new symbols are slightly different. For example, the Connect symbol only has CID, EID and Take Inputs. Is that the one you were talking about?
Re: Simpl Solution Only

 

Can't change the values during runtime

--- In Crestron@..., "eagrubbs" <eagrubbs@...> wrote:

analog scaler? Wrapped in a module?

--- In Crestron@..., "Witmarquzot Dyrjuv" <witmarquzotix@> wrote:

I am looking for a way in simpl only if possible to expand an incoming set of values, say 0 - 15385, to be a scale of 0 to 65535.

Rules:
Must be configurable during run time(ie the top or bottom of the scale may move) without resetting the processor.
It must expand any set of values that falls between the scale of 0 to 1 and 0 to 65535,

Anyone got any ideas or am I going to have to bust out the simpl+?
Re: Simpl Solution Only

 

analog scaler? Wrapped in a module?

--- In Crestron@..., "Witmarquzot Dyrjuv" <witmarquzotix@...> wrote:

I am looking for a way in simpl only if possible to expand an incoming set of values, say 0 - 15385, to be a scale of 0 to 65535.

Rules:
Must be configurable during run time(ie the top or bottom of the scale may move) without resetting the processor.
It must expand any set of values that falls between the scale of 0 to 1 and 0 to 65535,

Anyone got any ideas or am I going to have to bust out the simpl+?
Re: Simpl Solution Only

 

I'm lazy .... bust out the S+ and save a ton of time. - Tray




Sent from my Samsung Galaxy Note?, an AT&T LTE smartphoneWitmarquzot Dyrjuv <witmarquzotix@...> wrote:
I am looking for a way in simpl only if possible to expand an incoming set of values, say 0 - 15385, to be a scale of 0 to 65535.

Rules:
Must be configurable during run time(ie the top or bottom of the scale may move) without resetting the processor.
It must expand any set of values that falls between the scale of 0 to 1 and 0 to 65535,

Anyone got any ideas or am I going to have to bust out the simpl+?



[Non-text portions of this message have been removed]
Simpl Solution Only

 

I am looking for a way in simpl only if possible to expand an incoming set of values, say 0 - 15385, to be a scale of 0 to 65535.

Rules:
Must be configurable during run time(ie the top or bottom of the scale may move) without resetting the processor.
It must expand any set of values that falls between the scale of 0 to 1 and 0 to 65535,

Anyone got any ideas or am I going to have to bust out the simpl+?
Re: Wirepath DVRs and Crestron TPMC-3SMD Streaming Issues

 

The Wirepath streaming will not work on a 3SMD with release firmware.
We have a beta version in-house that we are testing against the 3SMD that is to address the streaming issues on the 3SMD. Not going so well as the PUF update has the panel in a reboot loop. Hope to have better news in the morning.

-Jim


Jim Felderman
ControlWorks Consulting, LLC
440.449.1100 x1101
Crestron Services Provider
www.controlworks.com

--- In Crestron@..., "enco.josh" <enco.josh@...> wrote:

I have been unable to get the streaming to work on the 3SMD. I have got it working with the TPMC-4SMDs before. Is there a bug in the TPMC-3SMD MJPEG streamer that anyone has found? I tried call TB, but was on hold for over an hour today before I gave up.
fget on TSW panels

Dustin
 

1. Has anyone had success with the fget command on TSW panels for downloading display projects?

It very well may be the syntax i'm using.

Trying:
fget [url to file] &#92;ROMDISK&#92;user&#92;display&#92;

I receive "Error Code= 87 Internal err= 0". TSW running fw 1.06.15

2. If it does work, is this scriptable along with the "Projectload" command to achieve display updates? Loading several panels over VPN this might be quite a time saver.
Re: Cresnet cable

 

Liberty Wire and Cable LLINX-U, LLINX-U-DB, LLINX-D, LLINX-Q, etc.. They also have high power versions(uses 12 AWG rather than 18 AWG for power) and plenum versions

Tim

--- In Crestron@..., "David Peddicord" <dpeddicord2@...> wrote:

I know that Creston sells their own cable, but what is a good generic wire
to use instead? Thanks.



David Peddicord





[Non-text portions of this message have been removed]
Re: DM-MD6x6 and Surround Audio

Jesus @ Audio& Net Artist
 

Can you take a SPDIF cable out from the TV were you connected the HDMI from
the Room Controller?

--
*Jesus Tossas*
*
*
*Technology Architect, Audio Engineer, Programmer*
*
*
*787-460-1223*
*
*
Contact Info <>
Wirepath DVRs and Crestron TPMC-3SMD Streaming Issues

enco.josh
 

I have been unable to get the streaming to work on the 3SMD. I have got it working with the TPMC-4SMDs before. Is there a bug in the TPMC-3SMD MJPEG streamer that anyone has found? I tried call TB, but was on hold for over an hour today before I gave up.
Re: Naim NS02 Server

 

Thanks for the input, the module normally has a bounds = 8 but I changed this to 6000 just to see what other issues arose. I will check through the comments you make, thanks for that. This is a new module from Naim themselves and now includes the on line radio control over the older I2p module. As said the issue I have is that with the older database is was working fine. I have posted to Naim and Crestron so will see if they can give any more feedback. thanks again.

--- In Crestron@..., "h2oskr2001" <h2oskr2001@...> wrote:

I took a quick look while eating lunch after shoveling some snow¡­ Disclaimer: I don't know anything about this device or its 7400 line S+ module. I did notice that it has been substantially modified from the Crestron I2P module. You might want to talk to whomever made all those changes.

From a code perspective, the issue that appears to cause the error (and the loop) is that fnChangeStatus() is called with g_iTierCnt being a very large number (i.e. 65511). The check before the for() loop only checks that it is >0. I'll guess that the `tier count' is supposed to be a relative small number, 0 ¨C 8 if the I2P module is correct. Note that in the I2P module cMaxTierSteps = 8 and in the posted module cMaxTierSteps=6000. This constant is used to size the integer arrays that are modified in the for() loop. It is curious that in the error message is Bounds=8, not 6000.

There are lots of places where g_iTierCnt is written, sometimes absolutely (e.g. g_iTierCnt = 3) or relatively (e.g. g_iTierCnt = g_iTierCnt ¨C n). I'll guess that at some point one of these relative assignments caused it to cross the 0 boundary. You could start by adding a check in fnChangeStatus() to look for whatever the range ought to be and provide some trace info when the value is out of range. You could also localize the hunt by following the path of `now playing_but' to see where it enters and perhaps put checks on places where g_iTierCnt is modified in that path.

I do not know why a change to one of the databases might have stimulated the error. It looks more like code bugs, but perhaps both.

And now I'll stop because it's 7400 line S+ module that doesn't have a lot of comments and I'm done with lunch.


--- In Crestron@..., "John" <john@> wrote:

Hi all
Can anyone please help?? with an issue on the Naim NS02 server module (just uploaded this to the files section)
This module was working fine until the latest Crestron and device database updates, Now when I try and run the program I get a loop error, see below. I have tried re compiling the SIMPL+ and no errors show up, however as soon as I initiate the "now playing_but" of the module it puts a loop of data into the program with the following error message:

09:03:00 - 03-08-2013: TOD$ -> 030820130902590000
09:03:00 - 03-08-2013: [Console Data] : Error: Module S-2.9.2.4:S-9 : S2_Naim_audio_server_sophia_processor at line 1434: Integer Array STDATASTRUCT__IEXTTIERSEARCHISACTIVE overflow. Col = 65511. Bounds = 8
09:03:00 - 03-08-2013: [Console Data] : Error: Module S-2.9.2.4:S-9 : S2_Naim_audio_server_sophia_processor at line 1435: Integer Array STDATASTRUCT__ITIERSEARCHISACTIVE overflow. Col = 65511. Bounds = 8
09:03:00 - 03-08-2013: [Console Data] : Error: Module S-2.9.2.4:S-9 : S2_Naim_audio_server_sophia_processor at line 1434: Integer Array STDATASTRUCT__IEXTTIERSEARCHISACTIVE overflow. Col = 65510. Bounds = 8
09:03:00 - 03-08-2013: [Console Data] : Error: Module S-2.9.2.4:S-9 : S2_Naim_audio_server_sophia_processor at line 1435: Integer Array STDATASTRUCT__ITIERSEARCHISACTIVE overflow. Col = 65510. Bounds = 8
09:03:00 - 03-08-2013: [Console Data] : Error: Module S-2.9.2.4:S-9 : S2_Naim_audio_server_sophia_processor at line 1434: Integer Array STDATASTRUCT__IEXTTIERSEARCHISACTIVE overflow. Col = 65509. Bounds = 8
09:03:00 - 03-08-2013: [Console Data] : Error: Module S-2.9.2.4:S-9 : S2_Naim_audio_server_sophia_processor at line 1435: Integer Array STDATASTRUCT__ITIERSEARCHISACTIVE overflow. Col = 65509. Bounds = 8
09:03:00 - 03-08-2013: [Console Data] : Error: Module S-2.9.2.4:S-9 : S2_Naim_audio_server_sophia_processor at line 1434: Integer Array STDATASTRUCT__IEXTTIERSEARCHISACTIVE overflow. Col = 65508. Bounds = 8
09:03:00 - 03-08-2013: [Console Data] : Error: Module S-2.9.2.4:S-9 : S2_Naim_audio_server_sophia_processor at line 1435: Integer Array STDATASTRUCT__ITIERSEARCHISACTIVE overflow. Col = 65508. Bounds = 8
09:03:00 - 03-08-2013: [Console Data] : Error: Module S-2.9.2.4:S-9 : S2_Naim_audio_server_sophia_processor at line 1434: Integer Array STDATASTRUCT__IEXTTIERSEARCHISACTIVE overflow. Col = 65507. Bounds = 8
09:03:00 - 03-08-2013: [Console Data] : Error: Module S-2.9.2.4:S-9 : S2_Naim_audio_server_sophia_processor at line 1435: Integer Array STDATASTRUCT__ITIERSEARCHISACTIVE overflow. Col = 65507. Bounds = 8
DM-MD6x6 and Surround Audio

enco.josh
 

I have a full 6x6 DM-MD6x6 system with one surround zone and the rest TVs. Is there a way to get surround audio in the surround zone when it is the only output on any given source? I can get surround sound if I change the Audio EDID to Best Overall, but then I get nothing in the other zones. I though the EDID was compiled dynamically depending on which source is selected to which output. It would be sweet if I could change the EDID setting programmatically? Is this just how the DM-MD6x6 is because it does not have DSP cards or am I doing something wrong?
DM-RMC-100-C Weird IR Issue

enco.josh
 

I have a DM-RMC-100-C box that I am having trouble controlling a Vizio TV. The volume up and down commands ramp up and down unpredictably. A tap on the volume up button results in an increase of 1-17 steps of volume. There are two Vizio TVs in a system totaling six TVs. The non-Vizio TVs do not have the problem. I tried several drivers as well as learning one in myself to no avail. The commands seem to work fine when I test them with my IR learner. The other IR port and the serial port on the DM-RMC-100-C are not in use. Anyone else seen anything like this?
Re: Getting Multiple IP Camera's to be viewed on a TPMC-9L

 

which demo program mark?
can?t find it???

what are the setup for the axis camera to be shown on tpmc-9l or tpmc-4smd??
thanks
nf

--- In Crestron@..., "Mark" <markrkaye@...> wrote:

take a look at the DNAV demo pgm - they do what you want in there

mark

--- In Crestron@..., "aaonslaught" <hungry@> wrote:

Hi Guys

I'm fairly new to the Crestron Simpl Windows side of things.

I have been given a house project to do, whereby I need to get Multiple IP Camera's to be viewed off of a TPMC-9L touch Panel, now the Touch Panel has a MJPEG page whereby you put all the corresponding info for the camera's details i.e. IP Address/Brightness etc

Now the problem lies for me in the fact that it seems to only take one IP Address.

I have gotten one camera to work on its own, but now cant access the rest of the camera's, as it only points to that one camera's Address...just by the way, should you need to know the camera's I am using, they are Axis IP Camera's

What can I do to get around this problem?

Regards
80181 - 80200 of 256450