¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date

Re: updating from Pro2 to Pro3 issue

 

The switch from ERR to MSG happened sometime during the 2 series.? I have a older PRO2 with a ERR led and a newer one with MSG.? I can't say for sure about the older one because it's sitting on a shelf unused for years, but the newer one does let you clear from the front panel.? As soon as we lost the ability to use the weather module on the 2 series, I got multiple notices a day telling me it could not connect.


Re: updating from Pro2 to Pro3 issue

 

If your goal is to not have the MSG light on unless there's a real issue, you'll have to go back to 2-series...
My experience is that with 3 and especially 4-series, there is no end to the minutiae that is line-itemed in the logs almost from the moment you restart.

In a related story, if anyone actually knows someone who understands what 99% of the crap that gets put in the logs really means and its implications, I would pay a pretty good sum to be locked in a room to grill them with questions...:)


Re: Samsung WA75C Interactive Display

 

Thanks for this information. It's interesting to see that the control codes are the same as for the LG TR3BF models...


Re: Samsung WA75C Interactive Display

 

I just went through this. Samsung Business Support is terrible...
After many calls and emails one of the reps finally found the commands. Hope this helps someone else.

RS-232?
Baud Rate: 9600bps
Data bit: 8bits
Parity: None
Stop bit: 1

IP
IP:? IP Address
Port: 4664


RS-232 Recommended. (Power On Not supported via IP, you can try Wake on Lan as a workaround but I didnt.)

Power On \x3A\x30\x31\x53\x30\x30\x30\x32\x0d
Power Off?\x3A\x30\x31\x53\x30\x30\x30\x33\x0d

Video Source

000 : VGA 3A 30 31 53 3A 30 30 30 0d
001 : HDMI1 3A 30 31 53 3A 30 30 31 0d
002:? HDMI2 3A 30 31 53 3A 30 30 32 0d
003 : AV 3A 30 31 53 3A 30 30 33 0d
022 : HDMI4 3A 30 31 53 3A 30 32 32 0d
021 : HDMI3 3A 30 31 53 3A 30 32 31 0d
031 : VGA2 3A 30 31 53 3A 30 33 31 0d
032 : VGA3 3A 30 31 53 3A 30 33 32 0d
051 : ATV 3A 30 31 53 3A 30 35 31 0d
101 : android 3A 30 31 53 3A 31 30 31 0d
103 : Slot in PC 3A 30 31 53 3A 31 30 33 0d
007 : Display Port 3A 30 31 53 3A 30 30 37 0D
102 : android + 3A 30 31 53 3A 31 30 32 0D
104 : Type-C1 3A 30 31 53 3A 31 30 34 0D
105 : Type-C2 3A 30 31 53 3A 31 30 35 0D
106:? DTV 3A 30 31 53 3A 31 30 36 0D
107 : YPbpr 3A 30 31 53 3A 31 30 37 0D




Re: updating from Pro2 to Pro3 issue

 

I'm a little rusty.? Haven't done anything since 2020.? Haven't done any updates since then so I guess that's first. My two goals are to replace the PRO2 in the main house and set up a separate system for a unattached garage with a apartment over for my special needs adult son.? He'll get a full kitchen, bath and laundry.? There'll be 2 flat screens.? One in the bedroom and one in the living room. Only 3 sources for that (Fios, Dune media server and Xbox).? Only things shared with the main house is internet access and access to the NAS? that has about 500 movies stored.? He's not into music so ether sound from the tv's or sound bars.? My kids have never even held a oem remote.? They grew up with Crestron touch screens.? My son that's moving over the garage lives by his iphone and ipad. So I'm thinking Crestron Go for him.? That is something I've never done before.? Something new to learn


Re: updating from Pro2 to Pro3 issue

 

What you can do is have a console connection in your program and issue a "clear" command periodically.? Or set up a "userprogcmd? clear", trigger a stepper that issues a clear command about a minute later.? Right before you log out, issue the command.


Re: updating from Pro2 to Pro3 issue

 

cut the led lead, no more msg light. problem solved


Re: updating from Pro2 to Pro3 issue

 

I reboot won't work. All sorts of stuff gets logged during boot.
I'm thinking something like monitor the log and clearing it upon entries. Or disabling logging all together, might work.


Re: Lutron Smart Bridge Pro Caseta switches and Crestron Home

 

Mike,
Any reason you don't move the shades to the Ra3 system and eliminate the Caseta all together?


Re: Lutron Smart Bridge Pro Caseta switches and Crestron Home

 

I thought of that and think that would work for Caseta Lighting. I have a system with a RA3 for lighting and a Caseta system for shades. Before trying two processors, I deleted the RA3 from the current CH system and added the Caseta system. It connected with no problem, and then I was able to add Caseta Rooms to CH Rooms. In the CH configurator, I opened the Lutron properties in the room it does show the shades. However, in the end-user CH IU it only shows scenes and no shades.


Re: updating from Pro2 to Pro3 issue

 

Any reason to think a hardware reboot from the front panel might work?? I don't recall seeing anything in the front panel user interface.


Re: updating from Pro2 to Pro3 issue

 

Whew, yeah, these days you just need to let the OCD of the MSG light go.? I think they make that particular light run on a miniscule amount of radioactive dust because it will be on literally forever.


Re: Lutron Smart Bridge Pro Caseta switches and Crestron Home

 

Mike, have you tried a second home processor? One connecting to the Ra3 and the other Caseta


Re: MacBook M3 question

 

Long time Crestron/Apple user here.?

the speed and efficiency of the Apple silicon as well as battery life outweighs any of the downsides for me.?


I also carry an intel based mini stick PC in my toolbox for any fringe cases. Just search mini stick pc on Amazon you can get them for $200 or less.?


I¡¯ve run into other non USB issues like pieces of software not supporting windows for ARM. (Shure Designer is/was one of these). Stick PC is a work around for that.?


last added benefit I¡¯ll mention is you can just leave it in the rack to do work and free up your laptop. I.e. you can let it do firmware updates and move on to something else with your laptop. Especially if you are able to use something like TeamViewer.?


Re: updating from Pro2 to Pro3 issue

 

IIRC, I don't think that you can...
In fact, I remember distinctly that this is the reason why that light is called 'MSG'...It used to be called 'ERR' and it was freaking dealers and clients out so much (even though it was usually a benign message like yours) that they changed the label of the 3-series to 'MSG'!!...:)
the 3/4-series units seem to report everything to the log...I think I remember it registering me blowing my nose once!!...:):):)


Re: Tagging People

 

Checking the new posts here has become part of my morning routiune- check here, check Labs, check Crestron.com for new firmware, and for me the Lutron and Savant forums new posts. Getting to be an old man and set in my habits...


Re: Tagging People

 

On Fri, Apr 5, 2024 at 07:21 AM, fabiodaubermann wrote:
I guess I'm just old school.
I'm just old!...:)


Re: Tagging People

 

I do the same thing as Josh mentioned and it works great. Subscribing to a daily digest allows me to see at a glance what's going on in the community at large.
If anything, I get to learn about "problems that I don't even know I'm gonna have yet".
This community is a very important source of knowledge, decades of experience gathered in one place and feels less restrictive than other channels like Discord. I guess I'm just old school.


updating from Pro2 to Pro3 issue

 

I'm picking away at errors associated with this upgrade.? Nothing wrong with the old Pro2 but I miss having working weather.? Did a factory reset and worked through all the additional security issues that the Pro2 did not require.? After correcting everything, I clear the errors and all looks great.? However, the second I close out Toolbox, I generate a warning and notice that the IP address of this PC that I'm running Toolbox on has disconnected and the MSG led comes back on.

Warning: ConsoleServiceCE.exe #2024-04-05 06:14:52 # SHELL connection being closed from address 192.168.1.22.
Notice: ConsoleServiceCE.exe #2024-04-05 06:15:13 # SHELL Connection from 192.168.1.22

How do I stop this from popping up?


Re: Tagging People

 

I subscribed to the daily digest, so it's just one email per day. With a quick scan, I can see if there's anything new I should look at, or if any old threads that I've been a part of have new activity. It's not quite what you're asking about, but it works for me and is way better than getting all the emails.

--
Josh Winn
The LiquidPixel Group