On Sun, Feb 7, 2021 at 04:48 PM, Oliver Hall wrote:

SIMPLified program generator plug-in for doing just that - there’s a worked example doc on the Productivity Entitlement product page.

Hi Oliver

Project underway is Crestron HOME CP4R.

We have a project that has a Heatmiser system (Heating) and a DAIKIN VRF system (Cooling) - we have used CoolmasterNET many times with HVAC. However underfloor is not a common installation in our climate so we are green on this one.?

Q> We are looking for the best way to integrate these 2 services HVAC and Floor - and a way to prevent one unit heating while the other is cooling.

We've are efficient with BACnet processor links, Crestron home, SIMPL home and Crestron Programming - however needing and apricate any knowledge on this?

Regards
Mark G

?

In the infinite trainwreck that is Crestron's website at the time of writing, they moved a bunch of SKUs over to a dedicated Crestron lighting website and because of this, information has become horribly fragmented (I can't even log in to view pricing on some of these SKUs).

I'm looking for a simple "AirMedia / AMPS solution", ideally, but if SIMPL is required and makes things less of a headache, I'm game, I have a processor with empty program slots, and this implementation is only a few lines of code.

Use case is a few offices in a multi-story commercial building need a TV+AirMedia. Normally, I'd propose the occupancy sensors for TV on/off, but these offices are glass and previous experience with occupancy sensors in glass rooms has been less than ideal, even with masking and toying with settings for quite some time. On top of that, I'll likely have two sources and I generally avoid handing out factory remotes to end users due to inevitable service calls.

I was originally looking at the AM3200 + ZUMMESH-KP10AMBATT-B-S + ZUMMESH-AVBRIDGE + Crestron Controlled Display, but it's totally unclear to me if this is a complete "AMPS" system (or how to cable it?) and the more I started looking around and getting redirected and finding other SKUs such as the ZUM-HUB4 and the ZUMMESH-KP10AV2BATT-A-S, the less sure I became and the more value I can see to having the extra source/volume buttons and a custom program.

There are only four offices on this floor that require this type of set up. A few offices are adjacent, one is on the other end of the building. Again, minus the wall for the TV, these are glass offices.

Does anyone have experience with the ZUM equipment? Reliable? Anything specific I should know before proposing it as a solution? TIA!

Spectrum is the local provider for my customer in Palm Springs.? I have found some SA drivers that work OK, but not all the commands line up.

I happen to be playing with my Frame TV to check on something: If I'm in Art Mode, then a single send of an Exlinx HDMI input takes it out of Art Mode, but on my TV this is not the HDMI source. It's whatever the Samsung app thing is doing. Sending the HDMI command a second time gives you the HDMI input. And you can send the second command about a second later

OP

I have a Honeywell Turbo Vista on a com port of a Pro3 and it seems to be communicating properly but the keypad display says "PRINTER OFF LINE"? the alarm guy doesn't seem to know what this means, does anyone here?

开云体育

Does anyone know how to make a TSS-7 Scheduling panel a regular TSW to load simpl windows VTPro project? Is it possible have one and would like to use as regular panel

Talk to your rep. If they are cool like mine, they will get you an itunes gift card to get the app.

I have used many Global Cache Flex adapters with serial cable from VC4 to multiple models of Cisco Room Devices with no issues. Funny thing is, the first time when I chose to use one, it was due to problematic communication from a Series 3 DMPS com port that would stop working after a time for unknown reasons. Connecting the GC via TCP/IP to the DMPS and then serial to the Cisco solved the problem.?

i have an installer & he has an iPad with the old App, client has iPad w/Go
i have an android with App
there are differences between Go & App on iPad
i.e. advanced slider doesn't display full bar when light on full with iPad App, OK? on Go & android
dynamic icon list vertical - App displays all icons too large - looks OK on android, not sure about Go, client is away

i know, installer should upgrade, but he missed the free period & doesn't feel like spending US$100 again

just venting...

oh man, i miss that. thanks

You need to re-read Dave's response. He gives you all the info you need.

Awesome, how well does it work? Also what Certified Driver module works with? Video Server Ethernet?

The following files and folders have been uploaded to the Files area of the [email protected] group.

• /Sony Receiver Multi Zone CCD Example_compiled.zip

By: John Gabler <ComeAlive@...>

Description:
Example of Crestron Certified Driver control of Sony STR-ZAxxxx receiver for Main zone with Zone 2 and 3

Yes, you can control the Nucleus and the end points.. usiing different ports...3500 for nucleus and 5000 for endpoints. Ask evertz for the API documment. Their support is great.

?I have a project coming up with some of the UXP Evertz AvoIp stuff and wanted to see if anyone has controlled it yet ??

I have some sage advice……

Never try to control a Cisco room device with a non-native comm port.

Original config was VC4 with CEN-IO3-4 with com 3 card. I was getting very erratic behavior. Codec would not stay initialized.

Once I was able to obtain a CP4 with a native comm port, my troubles were over.

Anyone else had this problem?

I was on site this morning to put eye on it.? the help file is a little confusing in that the parameter field for the multizone module doesn't tell you that Zone A = Zone 2.? Once I got the timing issue at boot worked out.? It works as expected and I will post an updated example for anyone that wants it.