¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date

Re: LG OLED97G29LA 97'' LG 4K OLED evo TV G2

 

¿ªÔÆÌåÓý

Thanks David, very interesting.

The fact that concerns me a bit is that both model numbers you mention do have ¡°IP Control¡± mentioned in their specs, whereas ¡°my¡± model OLED97G29LA does not¡­
Instead, there is a whole bunch of ¡°smart¡± features listed that make me think that they might have dropped good old IP control on this model¡­

Waiting for a response from LG on that.

?

Thanks,

Thorsten

?

?

Von: [email protected] <[email protected]> Im Auftrag von David
Gesendet: Dienstag, 14. M?rz 2023 00:13
An: [email protected]
Betreff: Re: [crestron] LG OLED97G29LA 97'' LG 4K OLED evo TV G2

?

I have a?OLED65C1PUB control it using the Crestron Certified Drivers using ethernet.

On the online database there's a?OLED97G2PUA Driver that you could try and experiment with!


Re: DIN-8SW8-I & VC4 ?

 

Thank you


Re: LG OLED97G29LA 97'' LG 4K OLED evo TV G2

 

I have a?OLED65C1PUB control it using the Crestron Certified Drivers using ethernet.

On the online database there's a?OLED97G2PUA Driver that you could try and experiment with!


Analog Newbie Question #simplwindows

 

I'm in the process of honing in my skills which is very small. I'm controlling a C2N-AMP-4x100. What I can't seem to get working correctly is values updating as they should.

Volume buttons run to an Analog Ramp, analog out of that into an analog buffer thats enabled when the selected room is interlocked. Then the output of that runs to the "Room1_Volume" input of the amp symbol, and out of the "Room1_Volume_FB" into the same analog buffer (enabled by room selected Interlock) to pass to analog join 10 (Slider or gauge) to update the position as im holding the volume buttons. I cannot get the values to update on the slider or gauge ive tried both. I can use touch settable and that value will update but it will carry the same value when I select another room.

What is the best way to use one slider, 3 buttons (v+,v-,mute) to update the slider/gauge live, recall the volume levels of each "zone" if I were to switch rooms back and forth and not affect other zones reporting incorrectly?


Employment/Job Opportunities - Crestron Programmers - LA & South Florida

 

***ATTENTION CRESTRON PROGRAMMERS***
?
I am looking for talented new programmers to join my team.

- Full-time
- Competitive salary
- 401K
- Medical

Our company has been in business for over 25 years!

We have an amazing team and deliver outstanding projects.

If you are interested, please reach out to me at:
?
jared (at) ahtglobal (dot) com

Please put "CRESTRON GROUP OPPORTUNITY" in the subject line.

Thanks!

Jared Ross


Re: VC-4 USB Ethernet no longer possible #vc4

 

Any update on the fix for this or word on what exactly isnt working when trying to use the script?

Ive read that it gets confused on which network to use to "phone home" and that the script settings also get wiped whenever the VC-4 gets updated. Not sure if either or both of these are true.
Would using the USB-Offline dongle fix this issue??

We have several projects based around the dual network design Crestron said was possible and find it extremely irritating that it is "no longer supported".


LG OLED97G29LA 97'' LG 4K OLED evo TV G2

 

¿ªÔÆÌåÓý

Hi,

?

a client is looking to buy a LG OLED97G29LA 97'' LG 4K OLED evo TV G2.

Is there any experience on the list controlling this display via IP?

?

Thanks,
Thorsten


Re: Crestron Flex PC USB Network Adapter

 

If you have non X model, you can get second usb lan adapter (white ) from Crestron and IP what ever you want it. Not supported on X models (anything that has BYOD).


Ch5 Color Chip #ch5

 

Hi Guys,
?
I facing some issues in using the Ch5 color chip, The color is not been displayed in the design even though I use the default HTML program the Crestron support had given. Below is the screenshot of the issue I am facing. (The current nvm version I am using is 14.15.5, Just a note if the NVM version is being an issue.)
?
?
?
Any help would be appreciated. Please do let me know if any of you have faced similar issues...
?
Thank you.


Re: CHV-RSS Ohm Rating

 

Thanks all


Re: CLX Module needed...

 

Lucky.? I've got integrators who have been waiting for months.? This is not an easy part to find and unfortunately when they go bad..... you know.


On Sat, Mar 11, 2023 at 01:13 PM, ckangis wrote:
The 'U' versions are current, so I'd expect that you'll get them...

FYI, I found a friend who had one and was nice enough to help me with it, so I'm good on this one (Phew!!!!)


Re: Pro2 available

 

Hey looks like Chris got there first. If not or he doesn't want it I am at scottrlaird@...


On Sat, Mar 11, 2023 at 1:11?PM Scott Laird via <scottrlaird=[email protected]> wrote:
I'll take it. Thanks.?

Scott Laird
351 Riverside Ave.?
Ben Lomond, CA 95005

Let me know how much and I'll paypal you. (include email or phone #?)

On Sat, Mar 11, 2023 at 12:59?PM Dave Horoschak <dave@...> wrote:
I have a Pro2 that's in good shape.? I thought someone on ebay would want it, but after 3 weeks there hasn't been any interest.

Is it of use to anyone here?? It has the ethernet card and a good CF card.? Cover shipping and it's yours.? Seems better than throwing it out.? If no one wants it, it's off to the recyclers.
?- Dave


Re: Pro2 available

 

I'll take it. Thanks.?

Scott Laird
351 Riverside Ave.?
Ben Lomond, CA 95005

Let me know how much and I'll paypal you. (include email or phone #?)

On Sat, Mar 11, 2023 at 12:59?PM Dave Horoschak <dave@...> wrote:
I have a Pro2 that's in good shape.? I thought someone on ebay would want it, but after 3 weeks there hasn't been any interest.

Is it of use to anyone here?? It has the ethernet card and a good CF card.? Cover shipping and it's yours.? Seems better than throwing it out.? If no one wants it, it's off to the recyclers.
?- Dave


Re: Pro2 available

 

Hi Dave,
That'd be great! I'll take it if its still available...
Please reach out to me directly at:
chris at eicustom dot com

TIA!


Pro2 available

 

I have a Pro2 that's in good shape.? I thought someone on ebay would want it, but after 3 weeks there hasn't been any interest.

Is it of use to anyone here?? It has the ethernet card and a good CF card.? Cover shipping and it's yours.? Seems better than throwing it out.? If no one wants it, it's off to the recyclers.
?- Dave


Re: CLX Module needed...

 

The 'U' versions are current, so I'd expect that you'll get them...

FYI, I found a friend who had one and was nice enough to help me with it, so I'm good on this one (Phew!!!!)


Re: CLX Module needed...

 

?Does anyone know if these are even getting shipped? My order update says i am supposed to get some within a month. However I wonder if they even are making them. Thanks


Re: TSR-310 Continual System Disconnects & Fav CH not functioning #cp4

 

I would also recommend setting up a dedicated SSID for the TSRs at just the 2.4g freq.?
In larger systems with multiple APs, I would also have unique SSIDs on each AP and tie the TSRs to the closest AP to each of them.
They are not designed to be roaming devices...

I agree that this is not excellent in its design...


Re: Crestron Flex PC USB Network Adapter

 

No, if this is the one included with the UC kit it's intended as a dedicated connection for the included touchscreen, and can't be modified to work on another network. (IIRC)


Crestron Flex PC USB Network Adapter

 

Is there a way to keep the address of the USB adapter from changing back to "169.254.0.1"?