¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date

Re: Off Topic: Epson 5050UB Trigger

 

Thanks John.
At this point, no Crestron control, just manual.
AV Receiver trigger controls lift (old Panasonic projector melted from being sent up too early from AV Receiver trigger...trying to avoid repeating issue.)
Also, there is an IR receiver in room, so threat of someone/house cleaner, etc. accidentally turning projector on with its native remote.
I want the lift to be controlled from projector.? If that projector is on, I want lift down, no matter what and how.


Access RMC Scaler (via DM-MD) from SSH or Telnet #programming

 

I'm wondering if I can access an RMC-Scaler-C's RS 232 port from SSH or Telnet.

I'm starting first with textconsole. I'm looking at the PASSTHRU and PASSTO commands, but having trouble with the syntax that gets me to the slot I need, and then the RS-232. The 3-Series programming manual mentions creating an address book entry with the 'indirect' option. But that will give me connections to RS-232 out of a COM port, or let me access a card slot. So, for example, I can access card slot 17, but not 17.1.?

Is what I'm trying to do possible? And if so, am I on the right track with either of these commands? What would be the syntax if so? Or, is there a better way?

Thanks


Colorlight X8 LED processor protocol

 

Does anyone have information on the Colorlight X8 video wall processor???

I've controlled the Z6 before, but I have no idea whether the X8 utilizes the same protocol, and the manufacturer is... hard to get ahold of.

Any info would be heplful.

Thanks!
Mike


Hdmi Matrix IR Driver #crestronhome

 

Hi!
I would like you to help me with creating an IR driver for a
Matrix HDMI in Crestron Home, the procedure for creating it in ToolBox I can do, my question is which type of device is most suitable
to do this function. In the Device Type list I know I should choose
among the options with a yellow asterisk. I already have the IR codes.
You will only need 3 inputs and 1 output.
Which device type would you choose?
Thanks!


Hdmi Matrix IR Driver

 

¿ªÔÆÌåÓý

Hi!
I would like you to help me with creating an IR driver for a
Matrix HDMI in Crestron Home, the procedure for creating it in ToolBox I can do, my question is which type of device is most suitable
to do this function. In the Device Type list I know I should choose
among the options with a yellow asterisk. I already have the IR codes.
You will only need 3 inputs and 1 output.
Which device type would you choose?
Thanks!


Re: On Air Recording Light #reservedjoins #crestron

 


Re: VC-4 lack of console for printing msgs

 

Yes sorry... Program Instance. In our case we use a spare room license for debugging, and stop that program when we are done. You could actually do something similar by creating a program/cron that runs on the linux server.


Re: On Air Recording Light #reservedjoins #crestron

 

How is it controlled?
do you have a link to where I can look at them


Re: On Air Recording Light #reservedjoins #crestron

 

That's what we used in our studio at the office.? it works very well.??



Re: Off Topic: Epson 5050UB Trigger

 

When we use Epson some of the modules hafe a Cooling_Down_fb that we use to put up a message on panels. You should be able to us this when it goes low to raise your lift.?


Re: On Air Recording Light #reservedjoins #crestron

 

How about one of those Room Availability Signs??Yea you would need cresnet or a CENCN to put it on the network but would look nice


Re: VC-4 lack of console for printing msgs

 
Edited

Jeff: You mention Program Slots on VC4.? Can you elaborate on that. Am I missing something.? There are no program slots on VC4. An any running program (SIMPL or SIMPL#) requires a room and therefore a license.


Re: Off Topic: Epson 5050UB Trigger

 

Jeff,
When the lens cover closes, is the projector completely Off (i.e. the STATUS indicator has stopped flashing and the "cool down" period has ended)?
Basically, I'm trying to determine if I can use the trigger to lower and raise enclosed ceiling projector lift, where I DO NOT want the lift to close until the projector has completely shut down, including its cool down period.
If I use the trigger, does it seem ok for projector ceiling lift to close as soon as trigger turns off?

From manual for turning projector Off:
"Press the power button on the projector or the Standby button on the remote control again. (To leave it on, press any other button.) The lamp turns off and the lens shutter closes. The projector's Status light flashes and then turns off."

They don't say how long the STATUS light flashes, and I am not onsite to check this.

Thanks so much for the reply!


Re: On Air Recording Light #reservedjoins #crestron

 

Yeah just a simple light that says either On Air or recording. ?The idea is the light would go on any time the smp is recording. ?Preferably maybe something that could be run direct from the IO on smp. ?I guess he reached out to Extron ?and they said they don¡¯t have one any more. ?

looking for a new solution?


Re: On Air Recording Light #reservedjoins #crestron

 

There's lots that the radio broadcast industry offers, many of the relay controlled, but some have their own IP interface as well.

What kind of look are you after - just a red light? The traditional kind of light with the kit up "on-air" text?

Scott

On Thu, Oct 13, 2022, 4:49 p.m. <chrmac68@...> wrote:

I have a customer who is looking for a good Recording light that can be controlled via the IO on a Extron SMP.? I thought Extron had some but can¡¯t seem to find. ?

can anyone sugggest a good Recording light that I could use with a SMP or control via IP with Crestron VC4


On Air Recording Light #reservedjoins #crestron

 

I have a customer who is looking for a good Recording light that can be controlled via the IO on a Extron SMP. ?I thought Extron had some but can¡¯t seem to find. ?

can anyone sugggest a good Recording light that I could use with a SMP or control via IP with Crestron VC4


Re: VC-4 lack of console for printing msgs

 

I will double check ? Not in front of that PC right now ?

you can also check out Kiel the Coder. ?I used his samples to build mine out. ??


Re: VC-4 lack of console for printing msgs

 

We created a simpl#pro program that get¡¯s loaded in one of the program slots on VC4. It allows for a programmer to login with credentials and choose which program instance names running to watch, using a filter console command. Each of the other program implements the companion ¡°Debug¡± class that communicates with console program. Pretty easy and works as expected. This was written when only SIMPL#Pro programs ran on VC4.?


Re: Crestron Go (&APP) on iPhone 14 locking up #crestronapp

 

Thanks, somehow I missed that one!


Re: Crestron Go (&APP) on iPhone 14 locking up #crestronapp

 

I've seen scaling issues with other apps on the i14 as well... Bleeding edge tech. :(