¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Issues with Sonos & Crestron

 

Sorry to keep beating a dead horse...
But is that it? ?Sonos just no longer works on an MC3? ?The thread has had no activity since the ¡®fix¡¯ was released.
We¡¯ve literally done dozens of resi setups with an MC3 and Sonos. ? Are they all just ticking time bombs ready to blow up one at a time one a magic and unknown number of favorites is exceeded? ?Is Crestron going to put on their home page a big ¡®just kidding¡¯ banner for all the folks that bought into this? ?If its just me by all means let me know and I¡¯ll shut up but this really stinks in my book.
Re: New Processor FW v1.603.0113

 

It's interesting that there's no mention of NVX in any of those
release notes about if you try to use an NVX director in the previous
1.603 firmware it screws up the IP table. I contacted tech support and
they almost immediately told me to roll back to 1.601 because of a bug
in the 1.603 firmware related to NVX directors and ip tables. Wonder
if it's fixed.

On Tue, Oct 27, 2020 at 11:48 AM Phil Bridges <gravityhammer@...> wrote:

That's not a bug - it's a feature.

On Tue, Oct 27, 2020 at 2:45 PM <payne.william@...> wrote:

/setup page stops working
Re: XPanel port 42872 workaround

 

In VT Pro, use the arrow next to the play button and "Run As"
The settings you do there are saved as part of the vtz and will be used when you next run it
Delta 7th sense Nano WOL

 

Hello, has anyone worked with a Delta 7th Sense Media Server? if so how do i get it to turn on using WOL? it seems to go to sleep after shutdown
Re: New Processor FW v1.603.0113

 

That's not a bug - it's a feature.


On Tue, Oct 27, 2020 at 2:45 PM <payne.william@...> wrote:
/setup page stops working

Re: New Processor FW v1.603.0113

 

/setup page stops working
Re: Lexicon MC-10

 

Cough Core 110f cough.?
Re: XPanel port 42872 workaround

 

Yes that trick works Phil, it's just an arse having to do it especially when you are on site and there's half a dozen contractors all bending your ear and you miss the opportunity.
Thing is this used to work years ago when SG XPanel first appeared and worked for a few years then something broke and that was that.
Also when you are making small visual changes and you are having to re-load the XPanel each time.

I've just tried the F11 shortcut and the IP address keeps defaulting to 192.168.1.103 even though the last IP I set was 10.2.102.11.
Re: Lexicon MC-10

 

Not enough room for all the connections on the back?? Even for just a 7.1 channel processor, by the time you add the analog outputs and a small number of HDMI inputs / outputs, you would quickly run out of space.

Geoff

On Tue, Oct 27, 2020 at 10:23 AM <zac.sparrow@...> wrote:
A bit of off topic but why doesn't anymone make a pre/pro in 2U may be even 1U size?

Re: XPanel port 42872 workaround

 

I concur.

I have discovered that if you?go into the settings before it fully loads the file, it will have the last used settings (Address, port, and IPID) rather than resetting them.

On Tue, Oct 27, 2020 at 10:37 AM Slip Cougan <gk.otoole@...> wrote:
Not fully tested I see.
Yes it kinda works if you run it from VTP with F11.
Does not work if you double click the vtz.
Still defaults to?42872.

In my mind the default behaviour should be to default to the last setting entered.
So if my last settings are:
10.2.100.30
41792
A1

It should reopen on those settings not:
127.0.0.1
42872
03

This issue has been around so long it was reported on Labs long before labs became the graveyard it is now.
Sorry Dave, you got my hopes up and once again I've had the rug pulled from under me :)

-s

Re: XPanel port 42872 workaround

 

On Tue, Oct 27, 2020 at 10:37 AM, Slip Cougan wrote:
In my mind the default behavior should be to default to the last setting entered.
I agree with Slip!! remembering the last setting should be default (I think it was that long before, wasn't it?)

Dave H - This is one of many items that when I see it, it confirms my lack of confidence in Crestron's willingness to fix issues with their software/FW. Though it, in and of itself is a tiny, stupid little thing, It underscores the imposed costs to my business...??
If you have any say with the 'higher ups' please tell them to redirect *some* of their concern to the professional community vs. the wizarding community. I understand why they're focused on CH, but it is not the panacea that they think its going to be...
New Processor FW v1.603.0113

 

Has anyone seen any issues with this FW from last week???
Obviously it's supposed to fix the Sonos S1 Comm's/#Favs issue, but wanted to see if there were any unexpected problems...
I have a couple sites I need to update this week...

TIA!
Re: XPanel port 42872 workaround

 

Not fully tested I see.
Yes it kinda works if you run it from VTP with F11.
Does not work if you double click the vtz.
Still defaults to?42872.

In my mind the default behaviour should be to default to the last setting entered.
So if my last settings are:
10.2.100.30
41792
A1

It should reopen on those settings not:
127.0.0.1
42872
03

This issue has been around so long it was reported on Labs long before labs became the graveyard it is now.
Sorry Dave, you got my hopes up and once again I've had the rug pulled from under me :)

-s
Re: Lexicon MC-10

 

A bit of off topic but why doesn't anymone make a pre/pro in 2U may be even 1U size?
Re: XPanel port 42872 workaround

 

Fixed bug where the default port in the connection settings of Run As in VTPro intermittently changes to 42872.
Re: Lexicon MC-10

 

¿ªÔÆÌåÓý

Here is a link to the Protocol Document. ?I am creating my own module since the MC-8 is a complete different set of commands. ?So far, I am finding all the commands in the doc to be good.




On Oct 16, 2020, at 3:56 PM, Gary Miller <g@...> wrote:

The AudioControl Maestro module works for everything but inputs, I just ended up using IR for that.

On Fri, Oct 16, 2020 at 2:50 PM Geoffrey Reynolds <greynlds@...> wrote:
Yeah - the MC-12 was from about 19 years ago and Lexicon's own platform.

The MC-10 is more or less an Arcam AV860 in a different box, Logic7 added, and a few other minor feature tweaks.

Geoff

On Fri, Oct 16, 2020 at 3:37 PM Thorsten K?hler <thorsten.koehler@...> wrote:
Hi,
AFAIK the MC-10 has nothing in common with the MC-12, totally different platform. The MC-10 is basically based on Arcam (both part of Harman group). So i would rather expect an Arcam module to work than an MC-12 module.
Cheers, Thorsten

> -----Urspr¨¹ngliche Nachricht-----
> Von:?[email protected]?<[email protected]> Im Auftrag von Gary Miller
> Gesendet: Freitag, 16. Oktober 2020 20:51
> An:?[email protected]
> Betreff: [crestron] Lexicon MC-10
>?
> Is anyone familiar with this processor? Will the MC12 module work?
>?
> Tnx
>?
>?
>?
>?
Re: Processor not recognising unchanged IP table.

 

I'm sure that the shade power supply/hub has the same issue as the other hubs.
It totally makes sense.

Eventually, Crestron will fix it, but not until they can find something else to break.
Re: Crestron RMC3 with Cisco Touch 10 and Codec Pro

 

No, not needed for the RMC3 to connect. Just need SSH turned on and configured properly in your module. You can also try changing the SSH connection type to "Unsecure" in the Parameters if you simply want to test your connection and troubleshoot the key later.

Crestron also just released a free program for the RMC3 that you simply configure via an Xpanel.


I assume you are a dealer of course and have access to this.
Re: Processor not recognising unchanged IP table.

 

Remote System Definition
Re: Processor not recognising unchanged IP table.

 

I don't have either a DIN-CEN-CN-2 nor the CAEN-BLOCK-CENCN-2-POE in my program. I do however have a?CSA-PWS10S-HUB-ENET, and it very possibly that I only saw this pop up on this project after I added that device to the software.

Odd that I saw this in the past though on one CP3 which had no such Cresnet extenders, and it went away only after a restore. Oh well, hopefully it'll get fixed then in a future Toolbox release.
18661 - 18680 of 256445