Steve is clearly a troll and as such we shouldn’t feed it. I think though from your point 5, you’ve already come to the same conclusion.

As for your take on Crestron’s Sonos promise - I concur entirely. After Crestron killed off their own streaming solution (NSP) Sonos effectively became the new “official” solution to streaming music services within a Crestron system. Crestron need to make this work, and only a troll would try to defend them - particularly with the victim blaming line of ‘well only a fool would expect Crestron drivers to work in the first place’.

开云体育

And just in case you are still questioning a partnership...it took 10 seconds of googling to turn up theses press releases from Crestron


Or

LOL Steve, you really need to get a job on network news.

1. ?As you know the 60 series and their old apparently non updatable version of Android are trapped on the S1 app forever. ?Many clients updated to these units SPECIFICALLY for that feature. ?Its ok though because in a pinch you always had the SIMPL module for basic functionality...but oh wait that doesn’t work either. ?Have you ever had to tell a client NOT to buy something like a Sonos Move because it will break their very expensive Crestron system? ?I have. ?Then try to explain why? ?I have.

2. ?“Did you try rebooting your processor so see if the Sonos is rediscovered?” ?

? ? ?“And I didn't ask if rebooting the processor fixed the issue.? I ask if rebooting the processor broke it”

LOL...no you didn’t.

3. ?Crestron “Certified” drivers used to be A LOT better than they are now. (Is that even still a thing btw?) ?It was a pretty good bet that for the most part they did what they were supposed to do. ?“I have never seen a Crestron certified module that has completely worked right.? There is always some type of bug with them.? Most I land up rewriting myself.” ?Really Steve? ?That’s your rebuttal?

4. ?You are apparently and conveniently forgetting the big marketing push Crestron had. ?The home page of their website, the pretty printed literature, the email campaign...all of which was extolling the virtues of the new partnership with Sonos and how wonderful everyone’s lives were going to be because of it. ?The reps were handing out multi page glossy propaganda by the hundreds. ?You obviously weren’t at that Crestron summit where they had people from Sonos get up on stage and tell the 1000 or so people in attendance how thrilled they were with the new partnership. ?And you definitely weren’t at the dinner table of that very same event where several big dog Crestron employees and the Sonos folk were drinking beers and patting each other on the backs for such a momentous collaborative effort to get the ‘tight’ integration everyone was hoping for. ?So whether or not you choose to believe it does not change the facts.

5. ?Simply being contrary despite being informed of the very real situation people are facing is not a “different perspective”
Its argumentative, a little insulting and just a plain waste of time. ?I’m also not just a “cranky programmer”. ?Nor did I make a personal swipe at you. ?I am also a salesperson, an installer and business owner responsible for quite a few paychecks. ?Having issues like this is bad for business on every front. ?Especially when you can just buy a $50 smart whatever and control your doohickeys and thingamabobs with a free app. ?Crestron HAS to be better. ?Next time get your facts straight and bring something legitimate to the conversation next time.

I am not going to respond further to you Steve. ?I would like for this thread to continue to be for the topic of the OP. ?Sonos is broken again...in a new and refreshing way.

? ? ??

Really Steve? ?You managed to keep the Sonos app working on the 60 series TP’s? ?Sorry Mr. or Mrs. customer, you can no longer use that fancy WiFi remote we sold you for that room. ?For now on you will have to keep your phone or tablet with you in order to change the volume or select music. ?Oh and make sure that if you have anyone in the guest house to have them install the Sonos app on their devices because they won’t be able to use that expensive touchpanel either. ?Not sure how to construct your program to avoid that. ?It only takes two minutes of reading to see that rebooting the program doesn’t fix the issue at hand.

In this case it definitely seems to be a Sonos issue...a change they made to break the integration. ?My point is that if there was a real partnership involved that these updates would be tested and prepared for in advance.

开云体育

Did you try rebooting your processor so see if the Sonos is rediscovered?

Sounds like a Cloud problem to me.? Why else would everyone start have issues.? That may be Crestron's fault or it may be a Sonos cloud service problem.? The Reboot issue sounds like a bug in the Sonos module where if it gets something unsuspected, the processor reboots -- its not the first time I have seen something like this.

So far none of my clients have called me but for the most part, we constructed our programs where is the Sonos module breaks, it the Sonos will continue to work.

The completely insane thing to me is the following:
Crestron is quite a large company when compared with Josh.ai.
Josh.ai can fully search several of the streaming services on Sonos. ?You can ask it to play virtually anything.
It can even “voice cast” onto many Sonos devices.
Why can’t Crestron do any of this?
I haven’t heard anything breaking (yet) from Josh.
Why is Crestron constantly having problems?

Just curious,
Brian

Dave H-

This isn’t directed to you personally but it’s amazing how thoroughly and completely Crestron messed this whole Sonos integration up. ?I’m pretty forgiving of the roller coaster that is sometimes Creston but this has been a mess since day 1. ?You guys went out of your way to tell everyone of the ground breaking partnership with Sonos by sending out emails and advertising on the website but it has LITERALLY NEVER WORKED RELIABLY. ?Patch after patch, upgrade after upgrade has never fixed it. ?I’m really getting tired of eating crow with client after client trying to convince them that this will be the last time it breaks...the last time it will leave them hanging...the last time they will have to pay for a serivice call to fix this. ?Under normal circumstances this is a pain to deal with...but nowadays we are fighting for every job and every client and this Sonos nonsense isn’t something we should have to be worrying about right now. ?You guys are partners according to Creston, ?these things are tested all the time to prevent surprises right? ?A team of people in both companies “partnering” to ensure that things stay reliable and predictable right? ?Part of the Kool Aid we drink and the rhetoric we tell potential customers is that Crestron is “better” and that its the “most reliable”. ?We tell them that they don’t ?want Control4 or Savant or RTI or Elan because Crestron is supposed to be the premier brand. ?Failures like this are one of the big reasons people don’t come back to Crestron again. ?The system could otherwise be pefect but they’ll never forget how we had to be back a dozen times to reset their processor or upgrade a module to make theri Sonos work.

No need to inundate TB. ?I just spoke with Nicholas Northrup and he said
“Yes and it has been duplicated in Engineering and is top priority”
When I asked If they were on it. So looks like once there is a fix we may have o go around and update everyones Sonos modules again lol...I dont see how therewill be a solution without some sort of onsite visit.

hey, on a more humorous note, all of my Crestron/Sonos communication errors have gone away LOL!!!

ok everyone, just got done with a lengthy conversation with Crestron, they have acknowledged the problem and are "collecting data" (whatever that means).? they have encouraged all of us to contact them so that they have case numbers to back up the need for a solution.? Sooooooo, everyone start calling TB!!!

Crestron is currently performing some final tests to confirm the suspected root cause, but we anticipate an announcement and proposed workaround may be posted some time next week.

Ok, now I have one site that has completely failed.? Reboot does not bring it back any more.? Have no idea what has changed except for this, on this site, I tried uploading a new program setup with the nice idea of putting Sonos in the program 2 slot.? But, as soon as I uploaded the Sonos program, the controller (AV3) would load it and then restart it over and over again.? I pulled up the old program and made a quick change, compiled it and uploaded it to the system.? The darn thing started that reboot function again.? So I installed an older program that has not been compiled with this revision of Simpl and viola the reboot has stopped.? Now, the bummer is, the control is still not there.? I pulled up the text console and issued the errlog command and the AV3 thinks it is connected to the SONOS and ready to go.

This is exactly the same as I’m seeing, intermittent volume control (not using the media player, vol+/vol-/mute is all I care about).
Rebooting the processor may or may not fix it, there doesn't appear to be any pattern.?

Also have been seeing API errors in debugger when the Sonos debugging is enabled.......

Interestingly, I'm at a site with (2) PORTs (S2-12.1) and a CP3/TSWx60 setup, and 'So Far' no problems!?
I'm running CP3 PUF v1.601.0050
I have disabled all the ENABLEFEATURE items, including HYDROGENENABLE

My Friend is running a couple CONNECTs at his house with a CP3 set to the same FW, etc. and he's having issues... So Weird!!

Hello Guys
Does anyone have a module for?Key Digital Audio Matrix Switch KD-MAX8x8
Thanks

Has anyone experienced a problem in Toolbox when uploading a Web/Mobility projects to Pro3?

I can’t select removable media as a target, only internal flash. I tried removing spaces from the project file name and

also different projects, but nothing seems to make the Removable Media available. Is this a possibly a firmware issue?

I can ftp files directly to CF card if necessary, but would like to know what is causing the issue.

Thanks in advance.

?

Pro3 1.503.3318.24705

?

Mika Hagan

Avitel

I haven't had to integrated a Flex/UC Engine system with a processor in about a year, and I was wondering if anyone who has put their hands on one recently has seen how much feedback we can get through the control system from the UC-Engine?

Last time I was using it I was trying to get basic 'MUTE' status feedback, which was listed, somewhere, on Crestron's website as a known bug.

Anyone know if that's been fixed and if we get proper feedback for things like 'standby' or not?? It would be great to get a multi-display environment to power on/off automatically as well as show mute status for various mics in the room through the control system.

Thanks for the responses.? I've used Clare Controls (Snap AV) 16 channel amp before and it has been decent.? I had a hissing when I used the BUS input as the source, which was painful to discover, but when sources were direct, it sounded absolutely fine for background audio purposes as well as playing TV and other sources at a reasonable volume.

The RTI looks like a real winner.? Not sure if I want to go through becoming a dealer to just try and get one product from them.? But, that's not a product I've seen before and really hits the mark in terms of size/performance.

A shame that stupid C4 amp is unreliable.? The size and performance is perfectly fine for what I'm looking for.? Sigh...? I might still try to pick one up.? They aren't going for much used.

I guess a smaller 8-channel amp (or two) would work as well, but all amps seem to run into the same issue with depth for most units.? *sigh*