Re: Does anyone know of any IP modules for a 2014 Samsung UN series TV?

there is a module and example on Crestron's Application Market that works for 2018 models

Re: MC3 Image

Yes I did, now I`m waiting for my 2GB Micro SD card to arrive.

Re: Does anyone know of any IP modules for a 2014 Samsung UN series TV?

I do have the protocol for RS-232 via the mini jack service port. The module is written for URC Total Control but I can post a picture of the commands if you like.

You do need a TTL converter for the service port. I used a B&B electronics 232LPTTL but I cant remember if its the 3.3 or 5v version. I thinks its the 33 (3.3v) version.

The model I tested was Samsung ED55D.

Re: simpl#

#230221

Thanks for your help guys.?

Lincoln - thanks for clearing that up. Seemed to be a number of ways to skin the cat and wasn't sure the approved way!

sirgaston99 - just what I was looking for! Thanks!

Does anyone know of any IP modules for a 2014 Samsung UN series TV?

#230220

I know this TV can have IP control because there are some IOS apps that control the TV, but i've only seen IR files for it. Has anyone created a Module for TCP/IP control?

Re: VT project for ipad mini 4

#230219

开云体育

Used to be that way.? Not anymore and it is pretty easy to download the wrong one.

?

Adam Zatorski

King Systems LLC

?

Show quoted text

From: Crestron@... <Crestron@...>
Sent: January 24, 2019 10:59 AM
To: Crestron@...
Subject: [Crestron] Re: VT project for ipad mini 4

?

I always thought the crestron app on ipad only see it for the ipad and vise versa. I think used to be that way.

?

Thank you I will check on that.

Re: MPC-201 using power button only

#230218

It's a firmware problem. Rolling back to 1.503.0055 fixed the issue.

Re: Crestron DSP 1283 and MXA910

#230217

Crestron DSP 1283 and MXA910

#230216

Dear all,

Have anybody used DSP 1283 with SHURE MXA910, I need help on AEC control. For your information I had used the Shure MXA 910 9th cahnnel as it is the Auto Mix channel and routed it to DSP1283 1st channel only, I know that I had to route the far end audio to AEC reference in Crestron DSP but don't know how to do that . Somebody please help me with a snapshot or sample program for this.

Re: VT project for ipad mini 4

#230215

I always thought the crestron app on ipad only see it for the ipad and vise versa. I think used to be that way.

Thank you I will check on that.

Re: VT project for ipad mini 4

#230214

People are still using MobilePro and not the new App??

Re: VT project for ipad mini 4

#230213

I had this happen a few months ago, and it was because the client had mistakenly installed the iPhone app on one of the iPads.

Show quoted text

--- On Thursday, January 24, 2019 at 10:39 AM, johnny.cashav wrote:

Hey everyone,

have anyone had any problem not getting full screen when opening vt project on
the ipad mini 4? the same project on ipad mini 2 opens full screen w/o a
problem.
Do i need to make changedin the VT project or is something in the ipad
settings?

Thank you

Re: Infratech heater - 0-10v range to use?

#230211

Thanks Tony

Sent from my pocket computer

VT project for ipad mini 4

#230212

Hey everyone,

have anyone had any problem not getting full screen when opening vt project on the ipad mini 4? the same project on ipad mini 2 opens full screen w/o a problem.?

Do i need to make changedin the VT project or is something in the ipad settings?

Thank you

Re: MC3 Image

#230210

Were you able to find a copy?

Show quoted text

On Thursday, January 17, 2019 jeroen.vandervelden <Crestron@...> wrote:

Hi,

Im looking for an MC3 Image file. I found bunch of Reddit and Yahoo topics but no links in it.

Does anyone has the image?

Br, Jeroen

Re: Infratech heater - 0-10v range to use?

#230209

I worked on a project with a few of these a couple of years ago.  I didn't perform any scientific testing, but there was definitely a difference between say 30%, 60%, and 100%.  It wasn't very noticeable between smaller increments, so I simply gave them "High", "Medium", "Low", and "Off" settings.  I don't remember the exact model of Infratech heaters they had, or if that makes a difference.

Show quoted text

--- On Wednesday, January 23, 2019 at 2:20 PM, Jon wrote:

We have a house with 6 heaters and they say the range isn't really working,
the heaters are really just on or off.

I tried using like 10%, 20%, 30%, 40%,50%,60%, 70%, 80%, 90%, 100%. But I am
being told that the heat
is more like a switch and just really either on or off.

Has someone worked with these and figured out a curve that I can scale to such
a like 66% is min and 90% is max kind of thing? I know it all varies but how
many heaters, how high up they are mounted, the model, etv.

But wondered if someone has experienced this and has any tips.
Thanks!

Jon

Re: Cisco SX80 and Touch 10 Communication with Crestron DMPS3-200-C

#230208

You just need to create the GUi, and load to the codec. You can give your own name to each control, or use the default assigned when you create the control. In the program, use the cisco touch 10 modules, one for each control.(there is one for each type of control you can create) Put the name of the control widget from the gui editor in the paramWidgetId field, and tie all the modules to the control processor module, then send to the codec via your serial or SSH connection -

initialize the control processor module after codec or processor reboot, and that

should be all you need to do.

Infratech heater - 0-10v range to use?

#230207

Hi all,

We have a house with 6 heaters and they say the range isn't really working, the heaters are really just on or off.

I tried using like 10%, 20%, 30%, 40%,50%,60%, 70%, 80%, 90%, 100%. But I am being told that the heat

is more like a switch and just really either on or off.

Has someone worked with these and figured out a curve that I can scale to such a like 66% is min and 90% is max kind of thing? I know it all varies but how many heaters, how high up they are mounted, the model, etv.

But?wondered if someone has experienced this and has any tips.

Thanks!

Jon?

Re: Steamist Sauna Control

#230206

Does anyone had any idea?

On Monday, January 21, 2019, 5:15:46 PM EST, johnny.cashav@... [Crestron] wrote:

Hi everyone

Does anyone have a module that can control this device? I was using the one in the application market but they have changed the ports to udp 30303 and the olde one is 9761 and theres no way to change that.

Any help is appreciated.

Thank you

Re: Cisco SX80 and Touch 10 Communication with Crestron DMPS3-200-C

#230205

Hi,

Thanks for your reply, but do I need to do certain codeing in cicso VC or making the GUI using cisco end room controller is enough.

Show quoted text

On Wed 23 Jan, 2019, 3:48 AM ace_rimmer42@... [Crestron] <Crestron@... wrote:

?

We built a few systems with the Touch 10, SX80 and an RMC3 processor, also used an external switcher driving the presentation input. Main issues we had - make sure you create the custom UI in the same CE version as the codec, there are quite a few differences between versions. Module has to initialize after a codec or processor reboot, so you need to trigger an initialization with a delay from either the program restart or the codec restart. You should be able to use the Cisco Touch 10 module in application market without too much difficulty, or if not the command reference for 9.3 is here:

jim