The last one released for Denon Electronics AVR-3313CI is what I used for RS232, tried for TCP/IP as explained. I have never tried the Crestron AVR Connected integration due to what I have read here and I like to stay away from the head-banging-into-wall scenario.Go Marantz if you need to connect TCP/IP and stay in the D/M family of products.? I have added to the last Marantz SR module from the Application Market for current inputs, etc.JUST remember use a Crestron CLW-EX outlet or Panamax product with Bluebolt to cycle power of the receiver at night a few times a week¡or relay controlled outlet, whatever your preference. Trey?
toggle quoted message
Show quoted text
From: Crestron@... [mailto:Crestron@...]
Sent: Monday, February 8, 2016 8:54 AM
To: Crestron@...
Subject: Re: [Crestron] Denon AVR-X3200W? ? Trey I apologize but I don't see a X series module. Would you be willing to specify which one you used?
Thank you,
|
Re: Need SIMPL windows module for Extron AVT 100N
Thanks Jeremy weatherford
actually i am new in Crestron programming, i just finished my basic P101 training, so i don't konw how to create a moudule. if someone already created a module please upload for me.
|
Anyone can help with speed problems in code published before, Camera HE-60?
|
Re: Need SIMPL windows module for Extron AVT 100N
Dig into the manual.? You're fortunate that Extron products are highly controllable with decent protocols, so that's a good place to start.? If you have a specific question, feel free to ask it here.
On Sun, Feb 7, 2016 at 12:02 PM, jakram@... [Crestron] <Crestron@...> wrote:
?
Hi
I am new here, i want SIMPL windows module for Extron AVT 100N.? Actually my concern is to get feedback from Extron AVT 100N through Crestron Processor.
|
Re: Dsc Power series and IT-100 no communication from either direction
Sorry missed that part, are you using version 1.1 of the module? The TX should always work, the response is what I read you didn't have 6s+, please excuse typos.
toggle quoted message
Show quoted text
On Feb 8, 2016, at 8:35 AM, dave.dunaway@... [Crestron] < Crestron@...> wrote:
?
Thank you for your reply Trey, I will try another it100 on my next visit. But I am still very curious as to why i cannot get any output on the TX signal of the power series module. Even with the module running in an otherwise empty program, i cannot make it output. Does it really wait for input from the IT100 to init?
|
Trey I apologize but I don't see a X series module. Would you be willing to specify which one you used?
Thank you,
|
Re: Dsc Power series and IT-100 no communication from either direction
Thank you for your reply Trey, I will try another it100 on my next visit. But I am still very curious as to why i cannot get any output on the TX signal of the power series module. Even with the module running in an otherwise empty program, i cannot make it output. Does it really wait for input from the IT100 to init?
|
|
|
Thanks Trey,
Which module did you use?
|
We just had one on a job and it never connected TCP/IP client, could get to it on a web browser just fine, control through web browser just fine, just not with Crestron CP3, wired to rs232 and all worked fine, left it that way for this application, and after reading other issues here, I chalked it up to something that wouldn't get fixed anytime soon
?all our Marantz jobs have been fine with Crestron, sometimes needing a power cycle, including my own home, to stay connected 6s+, please excuse typos.
toggle quoted message
Show quoted text
|
Has anyone controlled the Denon AVR-X3200W via IP? Thank you,
|
Hi,
I did a LG video wall last week and had trouble with dvi too but found it to be 70 so input switch would be xb 00 70\x0D
Regards
AJ
|
Any luck getting the codes to work? I had to stab at codes to get a dvi input code and the tile codes aren't adding up.
|
Re: Rava built in sound files?
I asked Crestron for the files awhile back. To stop the default ring, type SIPDEFAULTRING OFF in console. To ring your own files you'll have to drive them with either reserved or assignable joins in VT-Pro.
________________________________
From: Crestron@... [Crestron@...]
Sent: Sunday, February 07, 2016 5:47 PM
To: Crestron@...
Subject: Re: [Crestron] Rava built in sound files?
Hello
Can I ask how you got the ringing sound files off the TSW? Are they in a an FTP folder?
Secondly, do you know if you can change the default ringing sound files on the panel to something different?
Thanks
J
On 7 Feb 2016, at 19:42, Heather Baiman heather@...<mailto:heather@...> [Crestron] <Crestron@...<mailto:Crestron@...>> wrote:
Just sent them to you.
________________________________
From: Crestron@...<mailto:Crestron@...> [Crestron@...<mailto:Crestron@...>]
Sent: Sunday, February 07, 2016 2:10 PM
To: Crestron@...<mailto:Crestron@...>
Subject: [Crestron] Rava built in sound files?
Does anybody have the files that are built into a TSW panel for the Rava intercom? I need to use the same ringing sounds to feed into a sound system via an MP3 player.
============================================================================
Please refer to
for important disclosures regarding this electronic communication.
============================================================================
------------------------------------
------------------------------------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the Database area.
------------------------------------
Yahoo Groups Links
============================================================================
Please refer to
for important disclosures regarding this electronic communication.
============================================================================
|
Re: Rava built in sound files?
Hello
Can I ask how you got the ringing sound files off the TSW? Are they in a an FTP folder?
Secondly, do you know if you can change the default ringing sound files on the panel to something different?
Thanks
J
toggle quoted message
Show quoted text
On 7 Feb 2016, at 19:42, Heather Baiman heather@... [Crestron] < Crestron@...> wrote: Just sent them to you.________________________________From: Crestron@... [Crestron@...]Sent: Sunday, February 07, 2016 2:10 PMTo: Crestron@...Subject: [Crestron] Rava built in sound files?Does anybody have the files that are built into a TSW panel for the Rava intercom? I need to use the same ringing sounds to feed into a sound system via an MP3 player.============================================================================Please refer to for important disclosures regarding this electronic communication.============================================================================------------------------------------------------------------------------Check out the Files area for useful modules, documents, and drivers.A contact list of Crestron dealers and programmers can be found in the Database area.------------------------------------Yahoo Groups Links<*> To visit your group on the web, go to: ???<*> Your email settings: ???Individual Email | Traditional<*> To change settings online go to: ??? ???(Yahoo! ID required)<*> To change settings via email: ???Crestron-digest@... ???Crestron-fullfeatured@...<*> To unsubscribe from this group, send an email to: ???Crestron-unsubscribe@...<*> Your use of Yahoo Groups is subject to: ???
|
Re: Dsc Power series and IT-100 no communication from either direction
Have you tried a new IT-100? ?This is our setup of choice and the few times this has happened to us, it's been the it-100? 6s+, please excuse typos.
toggle quoted message
Show quoted text
On Feb 7, 2016, at 2:31 PM, dave.dunaway@... [Crestron] < Crestron@...> wrote:
?
Hey Yall. I have a client that has an mc3 talking to a dsc power series panel through an it-100.
the system was working fine up until about a year ago when the link between the processor and the panel just didnt work any more.?
As of this moment, i get no serial data out of the crestron module using keypad button presses or the init function. I also get no data from the security panel using the crestron processor or with pc interface.?
Cabling has been verified a dozen times and im dead in the water,? Has anyone had an issue with this module not functioning and is there a secret handshake between the it-100 and its 232 companion that starts comm.?
I am not a security installer, so be gentle with that judgement.?
|
Re: Denon AVR4806 control via ethernet
You probably need to plug in the video cable to a TV to see the network settings. Definitely need a TCP/IP client, IP, as well as the port (probably 23). Good luck!
?
Hi,
I would like to use the Ethernet port on the back of my AVR4806 for control.? Here is my question...
Do I need to set an IP address in the TC/IP client, I am sure that I do :)?? If so, does anyone know how to access the network settings inside the AVR4806?? I do not know the IP address assigned to the unit when I connected it to my router.? I am striking out all over the place.?
This is the only thing I can find on the 4806 beside the manual.? The manual looks like the network manual is only on the 58 series.
| | | | NETWORK SETUP of AVR-4806/AVC-A11XV >Procedure of Network Setup mode. (1)Push the POWER switch during STANDARD button and INPUT MODE button press simultaneously. | | | | Preview by Yahoo | | |
Thank you for the help.
B
|
Dsc Power series and IT-100 no communication from either direction
Hey Yall. I have a client that has an mc3 talking to a dsc power series panel through an it-100.
the system was working fine up until about a year ago when the link between the processor and the panel just didnt work any more.?
As of this moment, i get no serial data out of the crestron module using keypad button presses or the init function. I also get no data from the security panel using the crestron processor or with pc interface.?
Cabling has been verified a dozen times and im dead in the water,? Has anyone had an issue with this module not functioning and is there a secret handshake between the it-100 and its 232 companion that starts comm.?
I am not a security installer, so be gentle with that judgement.?
|
Re: Rava built in sound files?
Please send the same files to me. Thank you
"Whatever doesn't kill you, it's simply makes you stronger"
toggle quoted message
Show quoted text
On 8 Feb 2016, at 3:42 AM, Heather Baiman heather@... [Crestron] <Crestron@...> wrote:
Just sent them to you.
________________________________
From: Crestron@... [Crestron@...]
Sent: Sunday, February 07, 2016 2:10 PM
To: Crestron@...
Subject: [Crestron] Rava built in sound files?
Does anybody have the files that are built into a TSW panel for the Rava intercom? I need to use the same ringing sounds to feed into a sound system via an MP3 player.
============================================================================
Please refer to
for important disclosures regarding this electronic communication.
============================================================================
------------------------------------
------------------------------------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the Database area.
------------------------------------
Yahoo Groups Links
|
Re: DM-MD8x8 Error message
All my displays arr HDCP complient. Have you seen this error message before?
On Friday, February 5, 2016, 6:35 PM, jonathany126@... [Crestron] wrote:
?
Are the displays or ?projectors HDCP compliant?
|
Trey Chamrad - Texas AVI