Keyboard Shortcuts
Likes
- Crestron
- Messages
Search
Re: Sony evi-d camera processor
Paul Armbruster
I should have read down further.... The zoom direction is combined with the speed, unlike the pan and tilt. The first 4 bits represent the direction, the lat 4 the speed. If it's \x24 the camera should be zooming in at a speed of 4. If it's \x37 the camera should be zooming out at a speed of 7. On Oct 9, 2014 8:28 PM, "Paul Armbruster" <p.r.armbruster@...> wrote:
|
Re: Sony evi-d camera processor
Paul Armbruster
I created my own Visca module a while back and haven't looked back. You can do everything in Simpl really easily (though I do store presets on the camera, not the control system). I also like to have the speeds change the longer you hold the direction, which none of the stock modules do. It's just analog to serials and vice versa. |
Re: New DSP
Paul Armbruster
The TesiraForte line would be the way to go if you're going BiAmp. They have better processing, lower cost, and have a VoIP version at the lowest going rate in the business. Their echo cancelation blows away ClearOne, and the don't have all of the "reload firmware to get rid of the buzz" (and other strange phenomenon) you get with ClearOne. |
Re: Yamaha RX-V675 Airplay command
De Nada
On 10/9/14, 6:37 PM, "Rafael Costa rafaelg.costa@... [Crestron]" <Crestron@...> wrote: Thank you! |
Re: Yamaha RX-V675 Airplay command
Thank you!
toggle quoted message
Show quoted text
On 06/10/2014 22:03, Kol Johnson kol.mstc@... [Crestron] wrote:
|
Re: CLWI dimmers keep on dimming!
¿ªÔÆÌåÓýAhh.. When I hear CLW without an RF or EX attached I assume the good old wired dimmers. ? Have you confirmed the load on the dimmer versus the rated maximum? If you¡¯re close/over that may also lead to some odd behavior. ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect | Crestron Certified Master Programmer (Gold) Crestron Services Provider | Biamp Audia Certified | Extron Control Professional From:
Crestron@... [mailto:Crestron@...] ?
? Just discovered it doesn't do it if not at full.
|
Re: Panasonic Camera
There is a Crestron module in Simpl for the WV-CS854 that is RS485 which may be helpful. On Fri, Oct 10, 2014 at 9:45 AM, crestron_programmer@... [Crestron] <Crestron@...> wrote:
|
Re: Panasonic Camera
Not sure of the exact model but I've controlled?Panny WV series cameras via Ethernet.
toggle quoted message
Show quoted text
Controlled?via HTTP get commands, if I recall correctly. On Thursday, October 9, 2014, crestron_programmer@... [Crestron] <Crestron@...> wrote:
|
Re: CLWI dimmers keep on dimming!
¿ªÔÆÌåÓýI¡¯ve seen that happen in my home when the there is a short on Cresnet ¨C not every dimmer does it and the first time it happened it frightened me until I realized I had a stray wire on a CNTBLOCK (I can¡¯t remember what was shorting to what¡ but I removed the short an all was well) ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect | Crestron Certified Master Programmer (Gold) Crestron Services Provider | Biamp Audia Certified | Extron Control Professional From:
Crestron@... [mailto:Crestron@...] ?
Has anyone had a dimmer just keeps ramping up to full and then jumping down to 0 and so on until you turn it off? ? This is ootb with no programming...? ? ?
|
Re: Hide Status bar with Crestron App on iPad
¿ªÔÆÌåÓýI agree. With wireless Crestron panels you can display the WiFi and battery meters in the screen, but Apple doesn't allow access to this info. I like having it there as well.? I guess it would be nice if it was a choice, though.? -Kevin Keenan On Oct 9, 2014, at 10:56, smcnally@... [Crestron] <Crestron@...> wrote:
|
Re: OT - New toolbox with FTP
Great. I'll try that...Thanks!
toggle quoted message
Show quoted text
---In Crestron@..., <andrew.welker@...> wrote : It is a checkbox option in the address book, and will only work with 3-series processors and TSW panels. Check the "Use SSH/SFTP (22)" checkbox under the password box for the entry you want to use it with. The default user name is crestron without a password.
|
Re: Poll results for Crestron
I agree, Heather. I stopped calling it "Aspect" many years ago, after a couple of end-users asked me what it meant :-)
toggle quoted message
Show quoted text
--- On Thursday, October 09, 2014 at 8:58 AM, Heather Baiman wrote: |
Re: OT - New toolbox with FTP
Andrew Welker
It is a checkbox option in the address book, and will only work with 3-series processors and TSW panels. Check the "Use SSH/SFTP (22)" checkbox under the password box for the entry you want to use it with. The default user name is crestron without a password. On Thu, Oct 9, 2014 at 9:19 AM, chris@... [Crestron] <Crestron@...> wrote:
--
In Him, Andrew Welker |