¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date

Logic Question

 

I'm looking for a symbol or series of symbols that when the input goes high the output goes high a period of time later. ?When the input goes low the output goes low immediately. ?How do I do this...?


Re: iPad streaming video

 

"included" != "supported"

It still has issues and I certainly wouldn't consider it fully supported. ?FYI, Answer ID: 5195 (Updated 08/21/2014) still shows the Crestron App (iPhone & iPad) as supporting MJPEG but not H.264.


Re: 3 Series Multiple Programs - Tips, Tricks and Issues

 

You can enable authentication on the processor, and have multiple usernames/passwords, that are required for login over SSH.

The real benefit to me is bringing Crestron in line with pretty much every other network device out there.? SSH is very well established/respected in the networking world, and if you have to tell network security people what you're doing, is much easier.? If you just say "We manage it with SSH", they leave you alone, vs saying "there is the proprietary program called toolbox, and it connects over this obscure port".


Re: 3 Series Multiple Programs - Tips, Tricks and Issues

 

I think for now, it's just the encrypted connection...

Which doesn't mean a whole lot for now because we still don't have a password for SSH access...Therefore, who gives a shit if you're sending stuff to it in the clear or not...


Re: Cisco SX80

 

Just did a job with an SX80. Wish I would have read this thread before quoting the programming!

v1.0 of the module is indeed a mess.

Known issues: directory dialing can only dial using "method 1". If there are two methods defined in the codec database, you can't use method 2 (e.g. SIP). Workaround - save a temporary local copy of the directory on the codec, with only 1 method defined for each entry.
Camera presets don't work (saving or recalling). Workaround - use an SIO outside of the module.

Although the module's programmer wasn't previously aware of this issue, mine wouldn't authenticate with the codec until I rewrote that section of the module. It was too chatty, which kept interrupting the authentication sequence.?I re-wrote that logic outside of the module, while suppressing the module TX until authentication was acknowledged. Presumably this will get added to the "known issues" list.

I'm told that a new version will be released in early Oct2014. Until then, I'm happy to share my workarounds - just contact me via the LiquidPixel Group website.

Josh Winn
The LiquidPixel Group


Re: iPad streaming video

 

H.264 support for the Crestron App has been included since the?1.03.39 update in July. To the OP: There have been some issues with H.264 authentication support that supposedly will be fixed in the next release. Try disabling authentication in the camera and see if you can connect. Also, how is your URL formatted? Using RTSP?


Re: 3 Series Multiple Programs - Tips, Tricks and Issues

 

?SmartFTP is another one (not free) that fits our needs well.

You can send a single file to multiple devices with one click. You can also save your destinations for future use. You don't even have to open tabs once you have everything setup.?
?
Sent from my BlackBerry 10

? Original Message ?
From: jasonmussetter@... [Crestron]
Sent: Thursday, September 25, 2014 12:59 PM
To: Crestron@...
Reply To: Crestron@...
Subject: [Crestron] Re: 3 Series Multiple Programs - Tips, Tricks and Issues

Directory Opus is a great software, you're one of the first people besides myself that I've heard using it.? I had used that program going all the way back to their Amiga days, and then on the PC up to a couple years ago.

Currently, I'm using "FreeCommander" which is a open source 'clone' of DOpus which is pretty good.? Don't know if it has all the features that DOpus does, but it does support FTP as well, just not sure about secure FTP.? I've used it for FTP'ing to touchpanels and dumping the project files in though, so it works for that no problem.


Anyone who works with a lot of files really should look into either DOpus (paid), TotalCommander (paid), or FreeCommander (FOSS).? They definitely make things easier.


---In Crestron@..., <fooguy89@...> wrote :

I use Directory opus for FTP. ?I think it also supports (for an extra fee) secure FTP, but don't quote me on that. ?Directory Opus is a total replacement for the usual windows explorer file stuff. ?It has multiple tabs, and you can have 2 directory panes (each with multiple tabs) as well. ?You can do all sorts of scripting (I haven't delved into that) but just for the convenience of having the tabs and such it's amazing. ?It also has a nice preview tool built into it as well. ?I got sick of having multiple directory windows open, this solved it nicely. ?The FTP was a nice bonus when the 3 series started to support it.

Just keep in mind, this is not a free tool, but I found it well worth the money.


Re: 3 Series Multiple Programs - Tips, Tricks and Issues

 

Directory Opus is a great software, you're one of the first people besides myself that I've heard using it.? I had used that program going all the way back to their Amiga days, and then on the PC up to a couple years ago.

Currently, I'm using "FreeCommander" which is a open source 'clone' of DOpus which is pretty good.? Don't know if it has all the features that DOpus does, but it does support FTP as well, just not sure about secure FTP.? I've used it for FTP'ing to touchpanels and dumping the project files in though, so it works for that no problem.

Anyone who works with a lot of files really should look into either DOpus (paid), TotalCommander (paid), or FreeCommander (FOSS).? They definitely make things easier.


---In Crestron@..., <fooguy89@...> wrote :

I use Directory opus for FTP. ?I think it also supports (for an extra fee) secure FTP, but don't quote me on that. ?Directory Opus is a total replacement for the usual windows explorer file stuff. ?It has multiple tabs, and you can have 2 directory panes (each with multiple tabs) as well. ?You can do all sorts of scripting (I haven't delved into that) but just for the convenience of having the tabs and such it's amazing. ?It also has a nice preview tool built into it as well. ?I got sick of having multiple directory windows open, this solved it nicely. ?The FTP was a nice bonus when the 3 series started to support it.

Just keep in mind, this is not a free tool, but I found it well worth the money.



Re: NEC NP-PA500U Intermittent communication

 

The NP-PA500 has the Crestron Connected module in it will communicate "natively" with the processor over IP.?


Re: NEC NP-PA500U Intermittent communication

 

Perhaps its a scaling or offset issue? ?I am hoping to look at my system either tomorrow or perhaps next week. ?When I confirm what the "actual" lamp hours are on the devices vs what the module is saying perhaps we can find the root of the issue.

On another note, have you tried controlling one of these NEC projectors over IP? ?Just working up a backup plan if the ones I have been working with decide to lock up the COM boards again.... ?Can the same modules / API be used for IP controls?


Re: iPad streaming video

 

Are you using MJPEG or H.264? ?H.264 is supported on TSW panels but not on the iPad App.


Re: Cisco C20

 

I unsuccessfully tried the same. The C20 is cisco's "portable" system and ir was the most reliable way to control it. I usually suggest the C40 if given the opportunity just because of the control aspect.

Sent from my BlackBerry 10 smartphone on the Bell network.
From: paradiso_matt@... [Crestron]
Sent: Thursday, September 25, 2014 12:49 PM
To: Crestron@...
Reply To: Crestron@...
Subject: [Crestron] Re: Cisco C20

?

I tried to control a C20 TC4.2.1 yesterday with the Y cable and was totally unsuccesfull. ?Not sure what went wrong. ?CP2E processor.. ?think it will have to be IR control.. ? pins 2-3-5 to processor ??




Re: NEC NP-PA500U Intermittent communication

 

I have recently observed the same thing on several different systems using different projectors (not all NEC projectors but all Crestron modules).? I haven't figured it out.?? I even have one doing it using Crestron Connected for control!


Re: NEC NP-PA500U Intermittent communication

 

After having some more time to work with this system, now the communication to the projectors appear to be solid. ?However when using the NP2000 module, it appears that the lamp hours are not correct. ?Anyone seen this before, or do I need to change the command for lamp hour polling? ?Thanks in advance.


mlx-3

 

it's my first time to use the mlx-3 remote. the home theater i'm programming consist of:


2 displays

-TV?

-Projector with a motorized screen that goes down in front of the TV.


2 sources?

-popcorn hour media player controlled via IR

-cable box controlled via IR

-bluray player


up/stop/down shades


5 group of lights (3 dimming, 2 switching loads)


how would you guys program the remote for easy use for the client?

i'm new to this scrolling list navigation.




Re: Capture HD Reset

 

I wasn't aware the front USB ever worked on any firmware version. The problem is you can't set the IP address from the front panel. I told Crestron about this since they first shipped. When you set the IP from the front panel it sets the subnet mask to 255.255.255.255 and you wont be able to connect.


iPad streaming video

 

I have a tsw-750 that perfectly streams an IP cam, but my iPad running Crestron App can't seem to stream the same video. Nothing appears. I just used same logic.


Re: 3 Series Multiple Programs - Tips, Tricks and Issues

 

Sure you can ftp over mobile projects - at least for edits.? I'm not sure if they have fixed the issue of no manifest.xml (?) created when you first FTP over a mobile project.

On Thu, Sep 25, 2014 at 9:47 AM, Owain Price oprice@... [Crestron] <Crestron@...> wrote:
?

We do a lot of mobile projects and you cannot ftp transfer those projects. On larger files loading those projects can take 8-10mins, using SSH those transfer complete in roughly 1 min.


Thanks,
Owain Price
The Sound Room
St. Louis, MO

From: Crestron@... [mailto:Crestron@...]
Sent: Wednesday, September 24, 2014 8:44 PM
To: Crestron@...
Subject: [Crestron] Re: 3 Series Multiple Programs - Tips, Tricks and Issues



Aside from an encrypted connection are there any other benefits to SSH?






Re: 3 Series Multiple Programs - Tips, Tricks and Issues

Owain Price
 

We do a lot of mobile projects and you cannot ftp transfer those projects. On larger files loading those projects can take 8-10mins, using SSH those transfer complete in roughly 1 min.


Thanks,
Owain Price
The Sound Room
St. Louis, MO

From: Crestron@... [mailto:Crestron@...]
Sent: Wednesday, September 24, 2014 8:44 PM
To: Crestron@...
Subject: [Crestron] Re: 3 Series Multiple Programs - Tips, Tricks and Issues



Aside from an encrypted connection are there any other benefits to SSH?


Re: 3 Series Multiple Programs - Tips, Tricks and Issues

 

One thing about the beta Toolbox is that it unzips the .spz on the computer side and sends multiple files; sending via FTP unzips on the processor side, which (IMHO) saves time on the computer, allowing me to more quickly do multiple loads.

On Thu, Sep 25, 2014 at 9:11 AM, jbudz1977@... [Crestron] <Crestron@...> wrote:
?

I was having some strange problems that I though had to do with my programming / interaction between the different programs in the 3 series.? Turns out it had to do with some horribly wrong behavior of Crestron Connected control with the NEC projectors in the project. ?


Thanks for the advise or that "bypass auto start/stop of dependent programs" check box, makes things a lot smoother.? I stopped using FTP for uploading programs and panels because it just seemed like a lot more work for not a lot of speed gain.? I do use it for firmware updates because it saves tons of time there.? I look forward to the upgraded Toolbox that was promised in Masters class. ?

I sure do hate debugging a processor that is running multiple programs, and using the debugger in general these days.? It sure would be convenient if the software / hardware could handle debugging more than 1 program at a time. ?