开云体育

-----Original Message-----
From: "Heath Volmer" <hvolmer@...>
Sent: 鈥�6/鈥�10/鈥�2013 12:09 PM
To: "Crestron@... com" <Crestron@...>
Subject: [Crestron] OT: CAT5-powered speakers


I have a take-over client who has a Colorado VNet system that is misbehaving. Given their history of going out of business, he's not sure that he wants to repair it. I have since discovered that the various speakers around the house are powered by the system's touchpanels. Dandy! I'm thinking of replacing the system with some iPads or ?? but I'm hung up on the speakers. The original company did not home run any speaker cable.

Does anyone know of a Cat-based system that might work in a Crestron environment? (And no, not a RMC-200!) Even stashing something in the wall behind the iPads *might* be acceptable...

Heath


[Non-text portions of this message have been removed]

-----Original Message-----
From: "appelguy123" <appelguy@...>
Sent: 鈥�6/鈥�10/鈥�2013 11:26 AM
To: "Crestron@..." <Crestron@...>
Subject: [Crestron] Re: New iOS App?


Well, it looks like the hangup was due to the space in the filename. Once I changed the VT file name to just "test" it seems to work fine.

I have the App connected with a media player extender, connected to an Autonomic Controls MMS2, and the scrolling speeds are the fastest that I have seen so far (blows the TSWs away).

Nice work, Crestron!

-Ryan

--- In Crestron@..., "appelguy123" <appelguy@...> wrote:

Has anyone actually gotten this to work? I'm about to call TB to see if I am doing something wrong, but I can't seem to get something basic to work (on the pro version.)

The loading screen says "Loading Theme" for about 10 minutes, then changes to "Sending update request to control system" and then hangs, indefinitely (from what I can tell.)

I've loaded the panel file to the iPad with no luck, and have the same problem when I load to the processor. What gives?

All firmware updates are in place, all IP IDs are checked, correct app loaded, etc.

-Ryan

--- In Crestron@..., Eric Williams <ewilliams0305@> wrote:

Sweet!

-----Original Message-----
From: "John Pavlik" <jpavlik@>
Sent: 芒聙聨6/芒聙聨10/芒聙聨2013 10:45 AM
To: "Crestron@..." <Crestron@...>
Subject: RE: [Crestron] Re: New iOS App?


Leave the server blank and its peer to peer like the panels.


From: Crestron@... [mailto:Crestron@...] On Behalf Of Eric Williams
Sent: Monday, June 10, 2013 10:36 AM
To: Crestron@...
Subject: RE: [Crestron] Re: New iOS App?



I noticed under the VoIP setup there is no option for peer to peer. Does that mean the ios devices will require a sip server for RAVA?

-----Original Message-----
From: "John Pavlik" <jpavlik@<mailto:jpavlik%40crestron.com>>
Sent: 芒聙聨6/芒聙聨10/芒聙聨2013 9:47 AM
To: "<Crestron@...<mailto:Crestron%40yahoogroups.com>>" <Crestron@...<mailto:Crestron%40yahoogroups.com>>
Subject: Re: [Crestron] Re: New iOS App?

Make sure to use the new symbol. Communications are totally different from the old app. Much more efficient. You need to put the project name in the subslot.

On Jun 8, 2013, at 6:36 PM, "local94engineer" <petergorry@<mailto:petergorry%40verizon.net><mailto:petergorry@<mailto:petergorry%40verizon.net>>> wrote:

I'm guessing that because the new app does not have a field for a "passcode" then it should be removed from the program and then it should connect to the processor.

--- In Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com>, John Pavlik <jpavlik@<mailto:jpavlik@>> wrote:

Don't feel bad for me. I have never learned anything from people telling me only good things. The more you tell me the better things will get.

On the pricing, the Microsoft comparison is a good one. They were dumbfounded when I told them we didn't charge for firmware updates or development tools! I do wish we had better options to get a version out to those of you actually developing the interfaces but the App Store can be quite limiting.



On Jun 7, 2013, at 4:31 PM, "Eric Williams" <ewilliams0305@<mailto:ewilliams0305@<mailto:ewilliams0305@%3cmailto:ewilliams0305@>>> wrote:



I feel bad for John... Great job John, between the guys on labs and here, I'm sure you feel appreciated. Anyway... Great job!

-----Original Message-----
From: "Andrew Yalowitz" <andrewy@<mailto:andrewy%40stagesound.com<>>>
Sent: 脙陆6/脙陆7/脙陆2013 4:15 PM
To: "Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com<>>" <Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com<>>>
Subject: RE: [Crestron] Re: New iOS App?

I agree, though I wish the app was universal iPhone/iPad, instead of a separate one for each.








This e-mail message and all attachments transmitted with it may contain legally privileged and confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited.


[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

[The entire original message is not included.]

[Non-text portions of this message have been removed]

--- In Crestron@..., "stainbow1" <stainbow1@...> wrote:

Hey Guys, I just upgraded to the new VTPro, and when I save as an existing program, it creates a new project, but there is absolutely nothing in it, no pages or anything. And when I close that, and try to open it, it doesn't exists.

Any ideas? Do I need a new DB or something. I also downloaded the latest Databases from online today as well.


Pretty annoying as I'm trying to get some work done here.


Thanks for any advise.
Stephen D.

--- In Crestron@..., Kool-Aid Drinker <herald@...> wrote:

If you look at the full headers or "source" of a 2-series email,
you'll see a Content-type: header with a specific char set.

Compare 3-series.

With no char set designated, a 3-series email is at the mercy of email
reading program, OS internationalization, etc. Results WILL vary.

Complain to True Blue. As the basis of the email sender, they used a
free C# library that was known to have issues, but didn't apply any of
the readily available fixes.

On Sun, 9 Jun 2013 18:12:02 +0200, "kabza" <kabzaa@...> wrote:

It is not for panel. It is for -e-mail message. Here is my simpl+ code that
is working well in 2-series but in 3-series degree sign is not show.



message$ = date(1)+" "+time()+" - Temperature is "+ Temp$ + " &#92;xB0C";



Here is e-mail message:



06/09/2013 17:22:15 - Temperature is 35.0 ?C



Regards



From: Crestron@... [mailto:Crestron@...] On Behalf
Of Lincoln King-Cliby
Sent: Sunday, June 09, 2013 5:55 PM
To: 'Crestron@...'
Subject: RE: [Crestron] The extended ASCII codes in 3-series





What panel are you using?

It's likely not a control system issue, but a panel issue.

If it's a TSW... this was working early on, broken in firmware and reported
quite a while ago, and AFAIK still not fixed (though it's been a few weeks
since I've had time to play with it)

Lincoln

--- In Crestron@..., "appelguy123" <appelguy@...> wrote:

Has anyone actually gotten this to work? I'm about to call TB to see if I am doing something wrong, but I can't seem to get something basic to work (on the pro version.)

The loading screen says "Loading Theme" for about 10 minutes, then changes to "Sending update request to control system" and then hangs, indefinitely (from what I can tell.)

I've loaded the panel file to the iPad with no luck, and have the same problem when I load to the processor. What gives?

All firmware updates are in place, all IP IDs are checked, correct app loaded, etc.

-Ryan

--- In Crestron@..., Eric Williams <ewilliams0305@> wrote:

Sweet!

-----Original Message-----
From: "John Pavlik" <jpavlik@>
Sent: 芒鈧���6/芒鈧���10/芒鈧���2013 10:45 AM
To: "Crestron@..." <Crestron@...>
Subject: RE: [Crestron] Re: New iOS App?


Leave the server blank and its peer to peer like the panels.


From: Crestron@... [mailto:Crestron@...] On Behalf Of Eric Williams
Sent: Monday, June 10, 2013 10:36 AM
To: Crestron@...
Subject: RE: [Crestron] Re: New iOS App?



I noticed under the VoIP setup there is no option for peer to peer. Does that mean the ios devices will require a sip server for RAVA?

-----Original Message-----
From: "John Pavlik" <jpavlik@<mailto:jpavlik%40crestron.com>>
Sent: 芒鈧���6/芒鈧���10/芒鈧���2013 9:47 AM
To: "<Crestron@...<mailto:Crestron%40yahoogroups.com>>" <Crestron@...<mailto:Crestron%40yahoogroups.com>>
Subject: Re: [Crestron] Re: New iOS App?

Make sure to use the new symbol. Communications are totally different from the old app. Much more efficient. You need to put the project name in the subslot.

On Jun 8, 2013, at 6:36 PM, "local94engineer" <petergorry@<mailto:petergorry%40verizon.net><mailto:petergorry@<mailto:petergorry%40verizon.net>>> wrote:

I'm guessing that because the new app does not have a field for a "passcode" then it should be removed from the program and then it should connect to the processor.

--- In Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com>, John Pavlik <jpavlik@<mailto:jpavlik@>> wrote:

Don't feel bad for me. I have never learned anything from people telling me only good things. The more you tell me the better things will get.

On the pricing, the Microsoft comparison is a good one. They were dumbfounded when I told them we didn't charge for firmware updates or development tools! I do wish we had better options to get a version out to those of you actually developing the interfaces but the App Store can be quite limiting.



On Jun 7, 2013, at 4:31 PM, "Eric Williams" <ewilliams0305@<mailto:ewilliams0305@<mailto:ewilliams0305@%3cmailto:ewilliams0305@>>> wrote:



I feel bad for John... Great job John, between the guys on labs and here, I'm sure you feel appreciated. Anyway... Great job!

-----Original Message-----
From: "Andrew Yalowitz" <andrewy@<mailto:andrewy%40stagesound.com<>>>
Sent: 脙陆6/脙陆7/脙陆2013 4:15 PM
To: "Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com<>>" <Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com<>>>
Subject: RE: [Crestron] Re: New iOS App?

I agree, though I wish the app was universal iPhone/iPad, instead of a separate one for each.








This e-mail message and all attachments transmitted with it may contain legally privileged and confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited.


[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--- In Crestron@..., "Joseph K. Vossen" <jkv@...> wrote:

use your Google-foo: <'s_algorithm>

-----Original Message-----

From: xymox1357 <public2@...>
Sent: Jun 10, 2013 10:27 AM
To: Crestron@...
Subject: [Crestron] Error: CConsoleListenSocket::AcceptConnection: unable to disable Nagle algorithm


I am seeing a lot of these errors in my log. What does this mean ? They seem to occur about once a minute. Very annoying.

Error: CConsoleListenSocket::AcceptConnection: unable to disable Nagle algorithm for Console Sockets.

--- In Crestron@..., Eric Williams <ewilliams0305@...> wrote:

Sweet!

-----Original Message-----
From: "John Pavlik" <jpavlik@...>
Sent: 芒鈧���6/芒鈧���10/芒鈧���2013 10:45 AM
To: "Crestron@..." <Crestron@...>
Subject: RE: [Crestron] Re: New iOS App?


Leave the server blank and its peer to peer like the panels.


From: Crestron@... [mailto:Crestron@...] On Behalf Of Eric Williams
Sent: Monday, June 10, 2013 10:36 AM
To: Crestron@...
Subject: RE: [Crestron] Re: New iOS App?



I noticed under the VoIP setup there is no option for peer to peer. Does that mean the ios devices will require a sip server for RAVA?

-----Original Message-----
From: "John Pavlik" <jpavlik@...<mailto:jpavlik%40crestron.com>>
Sent: 芒鈧���6/芒鈧���10/芒鈧���2013 9:47 AM
To: "<Crestron@...<mailto:Crestron%40yahoogroups.com>>" <Crestron@...<mailto:Crestron%40yahoogroups.com>>
Subject: Re: [Crestron] Re: New iOS App?

Make sure to use the new symbol. Communications are totally different from the old app. Much more efficient. You need to put the project name in the subslot.

On Jun 8, 2013, at 6:36 PM, "local94engineer" <petergorry@...<mailto:petergorry%40verizon.net><mailto:petergorry@...<mailto:petergorry%40verizon.net>>> wrote:

I'm guessing that because the new app does not have a field for a "passcode" then it should be removed from the program and then it should connect to the processor.

--- In Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com>, John Pavlik <jpavlik@<mailto:jpavlik@>> wrote:

Don't feel bad for me. I have never learned anything from people telling me only good things. The more you tell me the better things will get.

On the pricing, the Microsoft comparison is a good one. They were dumbfounded when I told them we didn't charge for firmware updates or development tools! I do wish we had better options to get a version out to those of you actually developing the interfaces but the App Store can be quite limiting.



On Jun 7, 2013, at 4:31 PM, "Eric Williams" <ewilliams0305@<mailto:ewilliams0305@<mailto:ewilliams0305@%3cmailto:ewilliams0305@>>> wrote:



I feel bad for John... Great job John, between the guys on labs and here, I'm sure you feel appreciated. Anyway... Great job!

-----Original Message-----
From: "Andrew Yalowitz" <andrewy@<mailto:andrewy%40stagesound.com<>>>
Sent: 脙陆6/脙陆7/脙陆2013 4:15 PM
To: "Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com<>>" <Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com<>>>
Subject: RE: [Crestron] Re: New iOS App?

I agree, though I wish the app was universal iPhone/iPad, instead of a separate one for each.

[Non-text portions of this message have been removed]






This e-mail message and all attachments transmitted with it may contain legally privileged and confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited.


[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links









[Non-text portions of this message have been removed]

-----Original Message-----
From: "John Pavlik" <jpavlik@...>
Sent: 鈥�6/鈥�10/鈥�2013 10:45 AM
To: "Crestron@..." <Crestron@...>
Subject: RE: [Crestron] Re: New iOS App?


Leave the server blank and its peer to peer like the panels.


From: Crestron@... [mailto:Crestron@...] On Behalf Of Eric Williams
Sent: Monday, June 10, 2013 10:36 AM
To: Crestron@...
Subject: RE: [Crestron] Re: New iOS App?



I noticed under the VoIP setup there is no option for peer to peer. Does that mean the ios devices will require a sip server for RAVA?

-----Original Message-----
From: "John Pavlik" <jpavlik@...<mailto:jpavlik%40crestron.com>>
Sent: 鈥�6/鈥�10/鈥�2013 9:47 AM
To: "<Crestron@...<mailto:Crestron%40yahoogroups.com>>" <Crestron@...<mailto:Crestron%40yahoogroups.com>>
Subject: Re: [Crestron] Re: New iOS App?

Make sure to use the new symbol. Communications are totally different from the old app. Much more efficient. You need to put the project name in the subslot.

On Jun 8, 2013, at 6:36 PM, "local94engineer" <petergorry@...<mailto:petergorry%40verizon.net><mailto:petergorry@...<mailto:petergorry%40verizon.net>>> wrote:

I'm guessing that because the new app does not have a field for a "passcode" then it should be removed from the program and then it should connect to the processor.

--- In Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com>, John Pavlik <jpavlik@...<mailto:jpavlik@...>> wrote:

Don't feel bad for me. I have never learned anything from people telling me only good things. The more you tell me the better things will get.

On the pricing, the Microsoft comparison is a good one. They were dumbfounded when I told them we didn't charge for firmware updates or development tools! I do wish we had better options to get a version out to those of you actually developing the interfaces but the App Store can be quite limiting.



On Jun 7, 2013, at 4:31 PM, "Eric Williams" <ewilliams0305@...<mailto:ewilliams0305@...<mailto:ewilliams0305@...%3cmailto:ewilliams0305@...>>> wrote:



I feel bad for John... Great job John, between the guys on labs and here, I'm sure you feel appreciated. Anyway... Great job!

-----Original Message-----
From: "Andrew Yalowitz" <andrewy@...<mailto:andrewy%40stagesound.com<>>>
Sent: 媒6/媒7/媒2013 4:15 PM
To: "Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com<>>" <Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com<>>>
Subject: RE: [Crestron] Re: New iOS App?

I agree, though I wish the app was universal iPhone/iPad, instead of a separate one for each.

[Non-text portions of this message have been removed]






This e-mail message and all attachments transmitted with it may contain legally privileged and confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited.


[Non-text portions of this message have been removed]

------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links




[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

On Jun 9, 2013 11:59 PM, "joehostyn" <joehostyn@...> wrote:

**


I'm trying to figure out a simple fix for what should be a simple problem.
I have a client that would like local talk radio in several of their houses
that would normally be available on AM radio. At one point it was available
on the FM stream from the local cable company, but was killed two years ago
when they freed up the bandwidth for other services. I switch to MP3
streams on their Request Media servers.

Sometime over the last 7 months the radio stations seemed to have killed
all their MP3 support and now are only Flash. I can get it on Tune-In (a
streaming site).

It appears my options to stick with request are to trade in the 4.x series
servers for something that supports their new OS at a fairly heft expense
(3k plus for each server). If I do I can then get at if from Tune-In and
not have to reprogram much.

I was also thinking about using something like Roku which supports
Tune-In, but I'm not sure if I can do it easily.

If there are any Roku experts out here, I've installed a Roku box to test,
including one of the modules posted here. I can add the tune-in app and
create an account plus put the stations in my favourites. What I can see is
how I can easily select and play the favorite stations without using the
video interface. Is there a way to make each station as simple as a single
touch panel button press?

Does anyone have a simpler streaming radio solution for these types of
stations? Apple TV and airplay may be a possibility but it seems a bit
kludgy.

Also note, they have no AM reception for the area the stations are in.

-----Original Message-----
From: "John Pavlik" <jpavlik@...>
Sent: 鈥�6/鈥�10/鈥�2013 9:47 AM
To: "<Crestron@...>" <Crestron@...>
Subject: Re: [Crestron] Re: New iOS App?

Make sure to use the new symbol. Communications are totally different from the old app. Much more efficient. You need to put the project name in the subslot.

On Jun 8, 2013, at 6:36 PM, "local94engineer" <petergorry@...<mailto:petergorry@...>> wrote:



I'm guessing that because the new app does not have a field for a "passcode" then it should be removed from the program and then it should connect to the processor.

--- In Crestron@...<mailto:Crestron%40yahoogroups.com>, John Pavlik <jpavlik@...> wrote:

Don't feel bad for me. I have never learned anything from people telling me only good things. The more you tell me the better things will get.

On the pricing, the Microsoft comparison is a good one. They were dumbfounded when I told them we didn't charge for firmware updates or development tools! I do wish we had better options to get a version out to those of you actually developing the interfaces but the App Store can be quite limiting.



On Jun 7, 2013, at 4:31 PM, "Eric Williams" <ewilliams0305@...<mailto:ewilliams0305@...>> wrote:



I feel bad for John... Great job John, between the guys on labs and here, I'm sure you feel appreciated. Anyway... Great job!

-----Original Message-----
From: "Andrew Yalowitz" <andrewy@...<mailto:andrewy%40stagesound.com<>>>
Sent: 媒6/媒7/媒2013 4:15 PM
To: "Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com<>>" <Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com<>>>
Subject: RE: [Crestron] Re: New iOS App?

I agree, though I wish the app was universal iPhone/iPad, instead of a separate one for each.

[Non-text portions of this message have been removed]






This e-mail message and all attachments transmitted with it may contain legally privileged and confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited.


[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links





[Non-text portions of this message have been removed]

-----Original Message-----

From: xymox1357 <public2@...>
Sent: Jun 10, 2013 10:27 AM
To: Crestron@...
Subject: [Crestron] Error: CConsoleListenSocket::AcceptConnection: unable to disable Nagle algorithm


I am seeing a lot of these errors in my log. What does this mean ? They seem to occur about once a minute. Very annoying.

Error: CConsoleListenSocket::AcceptConnection: unable to disable Nagle algorithm for Console Sockets.

On 2013-06-10, at 1:33 AM, "Block-O-Matic" <michael@...> wrote:

That's a good question for Andrew, but I think it's flexible and can be used many ways. I think at masters, they said the entire program "could" be done in SIMPL#, but that may have changed...

mb

--- In Crestron@..., "jac777888" <jchelton@...> wrote:

Thanks as well. Is that how SIMPL# works, it allows you to create a user defined type in SIMPL+?

--- In Crestron@..., "Ken Brunner" <kenbrunner69@> wrote:

Thank you!

--- In Crestron@..., "Block-O-Matic" <michael@> wrote:

Just FYI. Andrew Culver was nice enough to post a SIMPL# module on github to show this working. I spent a few hours testing his module, expanding it and writing a help file. No knowledge of SIMPL# is required to make this work, so no fear! The module is small and easy to use.

Go to and follow the directions. You'll be pushing notifications to any app at in no time.

Let me know if you have any questions!

Michael Block

On Jun 8, 2013, at 6:36 PM, "local94engineer" <petergorry@...<mailto:petergorry@...>> wrote:



I'm guessing that because the new app does not have a field for a "passcode" then it should be removed from the program and then it should connect to the processor.

--- In Crestron@...<mailto:Crestron%40yahoogroups.com>, John Pavlik <jpavlik@...> wrote:

Don't feel bad for me. I have never learned anything from people telling me only good things. The more you tell me the better things will get.

On the pricing, the Microsoft comparison is a good one. They were dumbfounded when I told them we didn't charge for firmware updates or development tools! I do wish we had better options to get a version out to those of you actually developing the interfaces but the App Store can be quite limiting.



On Jun 7, 2013, at 4:31 PM, "Eric Williams" <ewilliams0305@...<mailto:ewilliams0305@...>> wrote:



I feel bad for John... Great job John, between the guys on labs and here, I'm sure you feel appreciated. Anyway... Great job!

-----Original Message-----
From: "Andrew Yalowitz" <andrewy@...<mailto:andrewy%40stagesound.com<>>>
Sent: �6/�7/�2013 4:15 PM
To: "Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com<>>" <Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com<>>>
Subject: RE: [Crestron] Re: New iOS App?

I agree, though I wish the app was universal iPhone/iPad, instead of a separate one for each.

[Non-text portions of this message have been removed]






This e-mail message and all attachments transmitted with it may contain legally privileged and confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited.


[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

On Jun 9, 2013, at 1:23 PM, "nicolasfreda" <nicolasfreda@...<mailto:nicolasfreda@...>> wrote:



Just one bad issue with the new app: the non-compatibility with ipad 1 version. everything else is great stuff -keep in mind we still are in beta kind of version-
great to have core 3 power on mac tablets.
nf

--- In Crestron@...<mailto:Crestron%40yahoogroups.com>, John Pavlik <jpavlik@...> wrote:

Don't feel bad for me. I have never learned anything from people telling me only good things. The more you tell me the better things will get.

On the pricing, the Microsoft comparison is a good one. They were dumbfounded when I told them we didn't charge for firmware updates or development tools! I do wish we had better options to get a version out to those of you actually developing the interfaces but the App Store can be quite limiting.



On Jun 7, 2013, at 4:31 PM, "Eric Williams" <ewilliams0305@...<mailto:ewilliams0305@...>> wrote:



I feel bad for John... Great job John, between the guys on labs and here, I'm sure you feel appreciated. Anyway... Great job!

-----Original Message-----
From: "Andrew Yalowitz" <andrewy@...<mailto:andrewy%40stagesound.com<>>>
Sent: �6/�7/�2013 4:15 PM
To: "Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com<>>" <Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron%40yahoogroups.com<>>>
Subject: RE: [Crestron] Re: New iOS App?

I agree, though I wish the app was universal iPhone/iPad, instead of a separate one for each.

[Non-text portions of this message have been removed]






This e-mail message and all attachments transmitted with it may contain legally privileged and confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited.


[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

On Jun 9, 2013, at 7:04 PM, "ChrisK" <chris@...<mailto:chris@...>> wrote:



I have a simple scrolling list test program that has one list that is programatically populated and It seems to work as well as the C3-xPanel, which is the fastest C3 device. In a related note this simple test shows that the 9L and the 4SMD panels CANNOT run C3UI - You can load it but no one will want to use it...

My quick test with the APP did bring up one issue that I haven't had time to T/S yet - I set the project for Landscape, It looks right in VTPro, the Preview showed it as landscape, BUT when I actually launched it, it was in Portrait mode (and truncated as you'd expect).

Anyone seen this?

--- In Crestron@...<mailto:Crestron%40yahoogroups.com>, John Pavlik <jpavlik@...> wrote:

Scrolling lists are *agonizingly* slow and clunky, on a par if not worse than the lag on TSW's

I'm surprised to hear that - in general the performance I thought was much better. Perhaps if you wouldn't mind sending me a project to exhibit this. Is this a general consensus on this group?

You're locked into one orientation when you create the project, portrait or landscape, no dual orientation mode currently

Rotation is coming this summer.

The built-in demo is laughable

Actually, we had a much nicer demo but due to some "guidelines" we had to swap it out. A better demo will be added next week.



This e-mail message and all attachments transmitted with it may contain legally privileged and confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited.


[Non-text portions of this message have been removed]

On Jun 9, 2013, at 12:19 PM, "Andy" <amaxey@...<mailto:amaxey@...>> wrote:



The graphics on Crestron's page for the new app appear (I haven't measured) to be the aspect of an iPhone 5. Plus the demo pages in the app fit my iPhone 5 whereas the demo on the old app does not. There's also a link to the GUI resource center that implies graphics available that don't seem to exist. With all of this one would be led to believe that they are at least thinking about it. But, who knows??



Andy

--- In Crestron@...<mailto:Crestron%40yahoogroups.com>, "weddellkw" <weddellkw@...> wrote:

The 'old' app was never modified to support the bigger screen sizes introduced with the iphone5. Wouldn't hold your breath for it at this point either.

--- In Crestron@...<mailto:Crestron%40yahoogroups.com>, "rlf79cm" <rlf79cm@> wrote:

Quick one, the Mobile Pro app on the iPhone 5 doesn't fill the screen (gaps at top and bottom) - is this just a case of increasing the resolution in VTProE or does the app itself not fill the screen fully? Apps like eBay, Facebook, etc fill nicely from top to bottom!

Cheers

This e-mail message and all attachments transmitted with it may contain legally privileged and confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited.