¿ªÔÆÌåÓý

On May 3, 2013, at 4:17 PM, Kool-Aid Drinker <herald@...> wrote:

Spell check. I can't always resist the temptation to randomly pick a
suggestion.

On Fri, 3 May 2013 16:07:19 -0600, Hearth Glimmer <hvolmer@...>
wrote:

What's with the "Heath Volumetric"? Do others see that? :-)

And no, the editor does not work well, but it works okay.


On May 3, 2013, at 4:01 PM, Kool-Aid Drinker <herald@...> wrote:

On Fri, 3 May 2013 15:54:24 -0600, Heath Volumetric <hvolmer@...>
wrote:

go with Neil suggestion to use the editor

On May 3, 2013, at 4:01 PM, Kool-Aid Drinker <herald@...> wrote:

On Fri, 3 May 2013 15:54:24 -0600, Heath Volumetric <hvolmer@...>
wrote:

go with Neil suggestion to use the editor

--- In Crestron@..., "eagrubbs" <eagrubbs@...> wrote:

But he has tried just giving the indirect text a serial join and that didn't work. It should have. I have 4 tsw's at my desk that the indirects are working on. Did you delete out the label info when you assigned the serial join?

--- In Crestron@..., Heath Volmer <hvolmer@> wrote:

I would first delete the entire HTML contents and go with Neil suggestion to use the editor, but why the "S$" and "?" ?

Should just be <cips>##:defaultText</cips>

On May 3, 2013, at 2:51 PM, richard_leek <leek.richard@> wrote:

I am working on a Core3 Xpanel where I need some indirect text on several buttons or text labels.

The text is not being displayed on the Xpanel. I can see that the text 'should' be there in Debugger.

Here is copy of what is in the HTML label field:

<cips><FONT size="18" color="#ffffff">S$1?</FONT></cips>

I have also tried this:

<P align="center"><FONT size="12" color="#000000"><cips>S$1?</cips></FONT>?</P>

Neither of these produce any results. I have tried deleting the object and creating a new one and still no good.

Does anyone have experience with this issue? Can you offer any solutions?

Thanks,
Richard

[Non-text portions of this message have been removed]

--- In Crestron@..., Kool-Aid Drinker <herald@...> wrote:

Not to thread-jack, but does the editor work well for other people?

After much frustration, I've gotten in the habit of storing/editing my
snippets in a text editor, and pasting them directly into the property
grid.

On Fri, 3 May 2013 15:54:24 -0600, Heath Volumetric <hvolmer@...>
wrote:

go with Neil suggestion to use the editor

--- In Crestron@..., Heath Volmer <hvolmer@...> wrote:

I would first delete the entire HTML contents and go with Neil suggestion to use the editor, but why the "S$" and "?" ?

Should just be <cips>##:defaultText</cips>

On May 3, 2013, at 2:51 PM, richard_leek <leek.richard@...> wrote:

I am working on a Core3 Xpanel where I need some indirect text on several buttons or text labels.

The text is not being displayed on the Xpanel. I can see that the text 'should' be there in Debugger.

Here is copy of what is in the HTML label field:

<cips><FONT size="18" color="#ffffff">S$1?</FONT></cips>

I have also tried this:

<P align="center"><FONT size="12" color="#000000"><cips>S$1?</cips></FONT>?</P>

Neither of these produce any results. I have tried deleting the object and creating a new one and still no good.

Does anyone have experience with this issue? Can you offer any solutions?

Thanks,
Richard

[Non-text portions of this message have been removed]

On May 3, 2013, at 2:51 PM, richard_leek <leek.richard@...> wrote:

I am working on a Core3 Xpanel where I need some indirect text on several buttons or text labels.

The text is not being displayed on the Xpanel. I can see that the text 'should' be there in Debugger.

Here is copy of what is in the HTML label field:

<cips><FONT size="18" color="#ffffff">S$1?</FONT></cips>

I have also tried this:

<P align="center"><FONT size="12" color="#000000"><cips>S$1?</cips></FONT>&nbsp;</P>

Neither of these produce any results. I have tried deleting the object and creating a new one and still no good.

Does anyone have experience with this issue? Can you offer any solutions?

Thanks,
Richard

--- In Crestron@..., "richard_leek" <leek.richard@...> wrote:

I am working on a Core3 Xpanel where I need some indirect text on several buttons or text labels.

The text is not being displayed on the Xpanel. I can see that the text 'should' be there in Debugger.

Here is copy of what is in the HTML label field:

<cips><FONT size="18" color="#ffffff">S$1?</FONT></cips>

I have also tried this:

<P align="center"><FONT size="12" color="#000000"><cips>S$1?</cips></FONT>?</P>

Neither of these produce any results. I have tried deleting the object and creating a new one and still no good.

Does anyone have experience with this issue? Can you offer any solutions?

Thanks,
Richard

--- In Crestron@..., Neil Dorin <neildorin@...> wrote:

Why don't you use the HTML editor to build the string for you. Then once
you see how they do it you can try and format yourself it if you like...


On Fri, May 3, 2013 at 3:32 PM, richard_leek <leek.richard@...> wrote:

**


Tried this too. Still does not work. Tried different colors & font sizes.


--- In Crestron@..., "eagrubbs" <eagrubbs@> wrote:

I have a simple text and a button that I just set the Indirect text join

on and they both work.I am not doing the <cips> or anything in the Label
section.

--- In Crestron@..., "richard_leek" <leek.richard@> wrote:

I am working on a Core3 Xpanel where I need some indirect text on

several buttons or text labels.

The text is not being displayed on the Xpanel. I can see that the text

'should' be there in Debugger.

Here is copy of what is in the HTML label field:

<cips><FONT size="18" color="#ffffff">S$1?</FONT></cips>

I have also tried this:

<P align="center"><FONT size="12"

color="#000000"><cips>S$1?</cips></FONT> </P>

Neither of these produce any results. I have tried deleting the object

and creating a new one and still no good.

Does anyone have experience with this issue? Can you offer any

solutions?

Thanks,
Richard

[Non-text portions of this message have been removed]

On Fri, May 3, 2013 at 9:25 AM, Kool-Aid Drinker <herald@...

wrote:

**


I just tried it on a TSW-1050. Can't see any difference.


On Fri, 3 May 2013 08:40:05 -0400, Jeremy Weatherford
<jweather@...> wrote:

Just posted yesterday:


Anybody tried this yet? I don't have any TSWs installed, but I'm curious
to see if this clears up any of the reported issues with rendering time

and

transitions.

--- In Crestron@..., "eagrubbs" <eagrubbs@...> wrote:

I have a simple text and a button that I just set the Indirect text join on and they both work.I am not doing the <cips> or anything in the Label section.

--- In Crestron@..., "richard_leek" <leek.richard@> wrote:

I am working on a Core3 Xpanel where I need some indirect text on several buttons or text labels.

The text is not being displayed on the Xpanel. I can see that the text 'should' be there in Debugger.

Here is copy of what is in the HTML label field:

<cips><FONT size="18" color="#ffffff">S$1?</FONT></cips>

I have also tried this:

<P align="center"><FONT size="12" color="#000000"><cips>S$1?</cips></FONT>?</P>

Neither of these produce any results. I have tried deleting the object and creating a new one and still no good.

Does anyone have experience with this issue? Can you offer any solutions?

Thanks,
Richard

--- In Crestron@..., Kool-Aid Drinker <herald@...> wrote:

CIPS tags take the join number only. All the formatting and static
text go outside.

<FONT size="12" color="#000000">S$<cips>1</cips>?</FONT>

On Fri, 03 May 2013 20:51:59 -0000, "richard_leek"
<leek.richard@...> wrote:

I am working on a Core3 Xpanel where I need some indirect text on several buttons or text labels.

The text is not being displayed on the Xpanel. I can see that the text 'should' be there
in Debugger.

Here is copy of what is in the HTML label field:

<cips><FONT size="18" color="#ffffff">S$1?</FONT></cips>

I have also tried this:

<P align="center"><FONT size="12" color="#000000"><cips>S$1?</cips></FONT>?</P>

Neither of these produce any results. I have tried deleting the object and creating a new
one and still no good.

Does anyone have experience with this issue? Can you offer any solutions?

Thanks,
Richard

--- In Crestron@..., "richard_leek" <leek.richard@...> wrote:

I am working on a Core3 Xpanel where I need some indirect text on several buttons or text labels.

The text is not being displayed on the Xpanel. I can see that the text 'should' be there in Debugger.

Here is copy of what is in the HTML label field:

<cips><FONT size="18" color="#ffffff">S$1?</FONT></cips>

I have also tried this:

<P align="center"><FONT size="12" color="#000000"><cips>S$1?</cips></FONT>?</P>

Neither of these produce any results. I have tried deleting the object and creating a new one and still no good.

Does anyone have experience with this issue? Can you offer any solutions?

Thanks,
Richard

-----Original Message-----
From: "Heath Volmer" <hvolmer@...>
Sent: ?5/?3/?2013 3:30 PM
To: "Crestron@..." <Crestron@...>
Subject: Re: [Crestron] Re: Wifi Recommendation

Can I clarify something when using controllers?

Right now, I'm romaing around this big house between the access points. I keep pressing a button and seeing the fb come into my CF project. At some point, when I drop one WAP and hit another (same SSID, no controller), I lose feedback for a couple of seconds but it seems to be reliably coming back without causing the connection to really break between CF and the processor. If I have a controller-managed WAPs, and good coverage, that couple-second hiccup should be eliminated, correct? The controller sees that one WAP has a better signal strength to the iPad than another and seamlessly hands them off?


Thanks, Heath



On May 3, 2013, at 1:22 PM, "floyd1212" <floyd1212@...> wrote:

+1 for Ruckus

The Pakedge Virtual Cell system appears to be a re-branded Meru system. You may look into pricing a Meru system directly, and compare it to the price of the Pakedge.

Side note: Not that I'm recommending it to anyone, but Ubiquiti is claiming "seamless hand-off" capabilities in the next firmware release for their WAPs, and it doesn't require a controller to manage them. Might be something to keep an eye on, since it will be at a significantly lower price-point than other managed wireless systems.

--- In Crestron@..., Eric Williams <ewilliams0305@...> wrote:

Pakedge wap-w5n with CTL-W5N controller. If price matters you can go down to their macro cell version. Built with IOS in mind and works great. We did a 34k square foot home and 4 covers the whole property without any disconnects



Sent from my pocket robot!

-----Original Message-----
From: "Heath Volmer" <hvolmer@...>
Sent: ?€?5/?€?3/?€?2013 11:37 AM
To: "Crestron@... com" <Crestron@...>
Subject: [Crestron] Wifi Recommendation


Can someone recommend WAPs / controllers for a 4-WAP system, specifically some that will hand off connections between WAPs without hiccuping iPads? I'd like to work with something that I can set up myself (I can only learn so much Cisco ios before I forget it). I've presented Access and the client won't bite on their system.

Currently I have Netgear WNDAP 360 WAPs and while they seem to work very well standing still, they don't hand off worth a crap.

Thanks, Heath


[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links





[Non-text portions of this message have been removed]