开云体育

Anyone having multiple problems with trying to get SystemBuilder created programs for MC3's to work properly - or to even get two builds that have the same problems (instead of a fresh batch of problems with every new build) - should note that your efforts will be in vain.

Especially if you're using RSD's.

Stop. Your only choices (at the moment) are to create your programs in SIMPL, or abandon the MC3 and go back to a 2 Series processor.

Tech support has indicated to me that they have no timeline as to when this will be rectified. The number of issues they have to deal with to fix this indicates to me that this may take quite a while.

Go have a beer. It may not be good for you, but at least it's soothing.

Hey Guys, Am I missing something or is there not a way to do a page flip animation with the Crestron Mobile - or Mobile Pro? (slide in/out left right, fold in half vertical/horizontal, book page turn, zoom in/out from middle, you know, all the transitions we have come to know and love on the iphone. I have some projects that a bare minimum would look really good with some animations. Or better yet expanded gesture control

My personal cool thought - have a page flip effect like when changing screens on the iphone/ipad (left/Right gesture) that as you flips changes pages/sub pages, and when the user stops on a particular page, it activates/routes the video to the display.

Anyways, if I am missing something, please let me know.

Also, does anyone know if there is a way to access the built in keyboard, rather than having to create one myself. I would love to Skin an P-IpodV Doc search page to look like you were browsing your own iDevice.

Thanks for the help!!

The ush, usp and umc macros are all within the directories specificied in user preferences. Nonetheless, I am getting an error each time I try to compile that the compiler cannot locate the ush files. I've recompiled the usp. No difference.

Any suggestions?

TIA

Will the MMS-2 see the new content "as soon as they add an audio file in iTunes by any method?" Or do you have to tell the MMS-2 to re-index the library before it will see the new content?

Just as an FYI, you have to re-index the library on the Sonos before it will see the new content as well. This can be triggered manually through the Sonos interface, or can be setup to happen on a fixed schedule.



--- In Crestron@..., "wretaudio" <wretaudio@> wrote:

I am a little wary of the AppleTV route incase of a firmware update that kills the control functionality. If I need their MMS-2 box to make this work reliably, then that's fine.

--- In Crestron@..., "Ted" <ted_brincka@> wrote:

The Autonomics MMS-2 or their Apple TV module to control iTunes right from a PC.

--- In Crestron@..., "wretaudio" <wretaudio@> wrote:

Basically a hardware device that can go through a network to find and play music files in an iTunes library. Sonos player can do this, but they do not have any control features. I need to design a system for a cutover that as soon as they add an audio file in iTunes by any method, it is available to be played for a player that is controllable from a Crestron touch panel.

Thanks again for your help.

--- In Crestron@..., "Paul Cunningham" <paul.cunningham@> wrote:

I'm not sure what you mean by "Sonos style" but the Autonomic MMS-2
sounds about right.

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On
Behalf Of wretaudio
Sent: Thursday, March 29, 2012 8:19 AM
To: Crestron@...
Subject: [Crestron] Controllable Sonos style iTunes media player

Is there a Sonos style player out there that can play iTunes music files
that is RS-232 or IP controllable? All I need is to be able to play
audio files in one zone or area of a building.

Thanks.



------------------------------------

**
***

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
**
***Yahoo! Groups Links

--- On Thursday, March 29, 2012 at 3:14 PM, Chris Anello wrote:

Thanks, found some of this info out...
It would be awesome to buy a $6K interface controller and $6K BMS for a
$2.5K mini-split, but i dont think even just one of these is a viable
option

--- In Crestron@..., "mrmondegreen" <mrmondegreen@...> wrote:

Some of the Mitsubishi units work with BACnet (which uses RS-485). I've

seen the protocol specification or a module on here (if you don't see it,
e-mail me), so you may be able to roll-your-own solution. Crestron also has
a specific device to interface with BACnet (GLS-BMA).

Chris W.

--- In Crestron@..., "Chris Anello" <chris.anello@> wrote:

Have a client with a pool house.
Stage one heating done with radiant from geothermal (same as system
in house where we currently use, but has geo cooling, too) Secondary

heating and first stage cooling are spec'd to be controlled by a Mitsubishi
MSZ/MUZ (MSZ-FE18NA indoor/MUZ-FE18NA outdoor) single-room mini-split heat
pump. The unit has an RF remote and optional wired control, but does not
use typical Tstat wiring (relays).

Has anyone dealt with controlling this via a Crestron CHV-TSTAT so
that the HVAC can be properly staged and controlled (they currently
have compteing heating sources.)

We have the option to replace the system with something if we know it

can be easily integrated. Anyone use anything like this (18,000 BTU) and
can control from Crestron.

Maybe even something that has another form of interface or com port
(RS232/485)

Any help would be appreciated.

-C

The ush, usp and umc macros are all within the directories specificied in user preferences. Nonetheless, I am getting an error each time I try to compile that the compiler cannot locate the ush files. I've recompiled the usp. No difference.

Any suggestions?

TIA

HI Javier,
I am am having the same issue as Brandon. I am sure I am close but just can't seem to get the camera to respond via the crestron connection. The commands are working in my browser. Not sure what I am missing.
The TCPIP client is set to the proper address, it is showing connected in debugger. But my commands don't seem to get thru.
Here is a sample command for the camera:



this string works in my browser but does not in my Serial I/O to my tcpip client.
Any words of wisdome or hint would help.

Thanks,
Serge
serge@...

--- In Crestron@..., "javiermazon_com" <javier@> wrote:

What you have to do is create a TCP/IP Client on your program with the IP of the camera to the port 80 and then capture the HTTP-HEADERS with some extension and send them as tx$ to the TCP/IP Symbol

In Firefox you have an HTTP HEADERS extension
In Chrome you have Developer Tools to inspect, under NETWORK, directly the HTTP queries. All you have to do is see what is the "command" sent from your browser to perform the desired action (Ex. Zoom, Pan, etc..) and copy that HTTP HEADER query, full to an SIO connected to the TCP/IP ts$.

If the HTTP HEADER requires more than one line (almost always) just copy all the lines in a single one and add "&#92;n" to each part that needs to be a different line.

For example, to turn on a Projector that has IP capabilities, I used:
"GET /cgi-bin/proj_ctl.cgi?key=video&lang=e&osd=on HTTP/1.1&#92;nHost: 10.1.133.21&#92;nConnection: keep-alive&#92;nAuthorization: Basic YWRtaW4xOnBhbmFzb25pYw==&#92;n&#92;n"

This is a real example, try experimenting with Firefox extensions or Chrome developer tools to capture what string triggers which action.

Best regards,

Javier Mazon
www.JavierMazon.com

--- In Crestron@..., "brandon" <brandonanchor@> wrote:

I am trying to control 4 Panasonic AW-HE50SN Camera's through IP communications. I talked to Panasonic and they said it could be done using a HTTP Protocol with a TCPIP Client on port 80
example: (power on)

I receive a 408 Request time out error.

What am i missing here?
I can send the control document if you need it.
I am on site and it is D Day as usual so some help would be greatly appreciated.
Thanks
Brandon

What you have to do is create a TCP/IP Client on your program with the IP of the camera to the port 80 and then capture the HTTP-HEADERS with some extension and send them as tx$ to the TCP/IP Symbol

In Firefox you have an HTTP HEADERS extension
In Chrome you have Developer Tools to inspect, under NETWORK, directly the HTTP queries. All you have to do is see what is the "command" sent from your browser to perform the desired action (Ex. Zoom, Pan, etc..) and copy that HTTP HEADER query, full to an SIO connected to the TCP/IP ts$.

If the HTTP HEADER requires more than one line (almost always) just copy all the lines in a single one and add "&#92;n" to each part that needs to be a different line.

For example, to turn on a Projector that has IP capabilities, I used:
"GET /cgi-bin/proj_ctl.cgi?key=video&lang=e&osd=on HTTP/1.1&#92;nHost: 10.1.133.21&#92;nConnection: keep-alive&#92;nAuthorization: Basic YWRtaW4xOnBhbmFzb25pYw==&#92;n&#92;n"

This is a real example, try experimenting with Firefox extensions or Chrome developer tools to capture what string triggers which action.

Best regards,

Javier Mazon
www.JavierMazon.com

--- In Crestron@..., "brandon" <brandonanchor@> wrote:

I am trying to control 4 Panasonic AW-HE50SN Camera's through IP communications. I talked to Panasonic and they said it could be done using a HTTP Protocol with a TCPIP Client on port 80
example: (power on)

I receive a 408 Request time out error.

What am i missing here?
I can send the control document if you need it.
I am on site and it is D Day as usual so some help would be greatly appreciated.
Thanks
Brandon

is it possible to get a video window inside the Crestron app?

mark

Does the HD-DA-2 'manage' the HDCP keys in the same way DM does, particularly as it concerns connecting two TVs to one Motorola cable box? Anyone tried this successfully/unsuccessfully?

Thanks,
Chris W.

FYI, the Release Notes of the beta Database posted last week state it adds
System Builder support for the MLX-3. So, it shouldn't be long now...

--- On Thursday, March 29, 2012 at 3:52 PM, rogiervs wrote:

Oh, and I have a useless MLX3 here, which Crestron told me would be SB
compatible in January, but still isn't... really really need to get up-to-
date with SIMPL...

Yea, use a non-local server. Processors really are not building for serving files; they just kind of happen to do it.

--- In Crestron@..., Eric Walters <sentry07@> wrote:

Messing with an XPanel that has dynamic graphics on it. It takes
foreeeeever for the graphics to load and the graphics are from a local
server. Anyone know how to speed it up? :)

Messing with an XPanel that has dynamic graphics on it. It takes
foreeeeever for the graphics to load and the graphics are from a local
server. Anyone know how to speed it up? :)

--- On Thursday, March 29, 2012 at 3:52 PM, rogiervs wrote:

Oh, and I have a useless MLX3 here, which Crestron told me would be SB
compatible in January, but still isn't... really really need to get up-to-
date with SIMPL...

Anyone having multiple problems with trying to get SystemBuilder created programs for MC3's to work properly - or to even get two builds that have the same problems (instead of a fresh batch of problems with every new build) - should note that your efforts will be in vain.

Especially if you're using RSD's.

Stop. Your only choices (at the moment) are to create your programs in SIMPL, or abandon the MC3 and go back to a 2 Series processor.

Tech support has indicated to me that they have no timeline as to when this will be rectified. The number of issues they have to deal with to fix this indicates to me that this may take quite a while.

Go have a beer. It may not be good for you, but at least it's soothing.