开云体育

Each lutron processor can be linked to only one crestron home system. So if the lutron system has more than two processors, and conveniently have the lighting zones separared Into different

And also you cant connect via indirect connection to a DIN tstat drives me crazy. USB only cmon I can connect indirect to a 20+ year old keypad...

We have a resi job coming up that consists of an old (large) main farmhouse, plus a couple of outbuildings. There are lots of rooms in each of the three buildings, plus landscape lighting all round

Jeremy, Here is what I have done: 1) In Debugger, with the projector off, I sent to the projector via tx$, my name & saw the same response on the rx$ side (btw, the port is set at 19200) 2) I made a

Would it be too much to ask to have the connectivity method be the same as EVERY OTHER tool within Toolbox...????? Load an Address book, select the device from the address book drop-down, device

This only vaguely resembles valid S+. You should start by constructing valid commands for the projector, testing them in Debugger, then using them in a Serial IO symbol in SIMPL. [email protected]>

You are probably best off contacting the Fusion Support Group - fsg at crestron. [email protected]> wrote:

I hope it's on one of the top boards and you don't have to disassemble the unit to get to it. That product line, IIRC, is the one that later convinced Crestron to add a manufacturing engineer as

Hi All, Have an AMS system in a client's home that it seems determined the battery on the main board for the NVRAM is done. Has anyone replaced these before? and if so, what is the battery model? All

Not sure if this will help, or if it's too elaborate, but we use a lot of these in our newer builds. Allows for power/data/conduit to be routed into the backbox and provides a space for equipment to

IIUC you want both 120 V power and low voltage in the same box. There are dividers made for such purposes, for example WallSource 2-Gang Box, Divider and Mounting Brackets (

Has anyone had any luck utilizing the Visual Ai feature recently added to Crestron's 1beyond Camera platform? I moved everything up to the most recent firmware and see the tab on the web Ui of my

Thanks @Jeremy. That worked great. I had to play around to get the correct syntax to make it work but it works well. For reference here is the command I'm running from a SIO: xCommand UserInterface

And from what I have seen the new firmware that was supposed to fix this doesnt actually fix it. Quite annoying.

I have been monitoring processors via SNMP for a while now. I monitor loads of CP3s and MC3s and a few DIN-AP3s and DMPS3s. I know the documentation is not great. Although I don't have access to any

Hello, I have a very old ViewSonic PRO-8100 projector and I decided to see if I can get the lamp hours via its RS-232 port. Let me start off by saying a couple of things: 1) My main control over the

The following items have been added to the Files area of the [email protected] group. * /Viewsonic PRO8100 projector manual.pdf (

There will be two screens back to back on the same 2X4 partition.? All wiring will be in the same bay.? Both screens will require power, 1 HDMI cable, a ethernet cable and a serial cable.? On one

These kinds of things are why I have not embraced HOME, CCDs, etc. You have to expect that the thing you want or expect to do cannot be done, until you prove otherwise...I don't have time for that.

AFAIR, my Crestron sales rep is telling me since a couple of years that VTPro is going away to prepare for the HTML5-only panels. Cheers, Thorsten Von: [email protected] <[email protected]> Im