开云体育

Any recs for a tuner - just needs to do AM/FM.? Small profile would be a bonus. Replacing old Crestron tuner.

Can you connect with netcat and issue them

I have a Digital Projection HIGHlite Laser WUXGA that I am having trouble controlling. I have downloaded the Crestron module from their website, as well as referenced the protocol guide. I am

Yes, it should work. You have to enable "free run" on the DVI card.

Trying to get audio source to a location that has a surround receiver fed by DM.? Customer wants to listen to an audio source while sometimes watch video source.? Wonder if I were to add a couple of

Cant you just connect to the panel running the project and use File Manager to pull all the UI files on the panel and then just zip them up and change to VTZ? Used to do that on old panels but havent

Unfortunately all I have is a VTX, not a VTZ... I seemed to remember that there was a way to convert, but that might only have been with construct...

A vtz file is just a zip file. You should be able to rename a vtz to zip and see how it is organized and replicate it with the files you have.

Couldn't you just ask True Blue? :-)

I'm assuming not, but I seem to remember something about this last year... I have a take-over project with TSW-1060s but no VTP source code. I have all the 'Display' files from the Toolbox/File

Hello, I managed to hose the configuration of a DM-NVX 360, and I need to get to text console over USB which i have done in the past with DM-NVX 35x devices.? ?I cannot seem to get a USB connection

The switch from ERR to MSG happened sometime during the 2 series.? I have a older PRO2 with a ERR led and a newer one with MSG.? I can't say for sure about the older one because it's sitting on a

If your goal is to not have the MSG light on unless there's a real issue, you'll have to go back to 2-series... My experience is that with 3 and especially 4-series, there is no end to the minutiae

Thanks for this information. It's interesting to see that the control codes are the same as for the LG TR3BF models...

I just went through this. Samsung Business Support is terrible... After many calls and emails one of the reps finally found the commands. Hope this helps someone else. RS-232 Baud Rate: 9600bps Data

I'm a little rusty.? Haven't done anything since 2020.? Haven't done any updates since then so I guess that's first. My two goals are to replace the PRO2 in the main house and set up a separate

What you can do is have a console connection in your program and issue a "clear" command periodically.? Or set up a "userprogcmd? clear", trigger a stepper that issues a clear command about a minute

cut the led lead, no more msg light. problem solved

I reboot won't work. All sorts of stuff gets logged during boot. I'm thinking something like monitor the log and clearing it upon entries. Or disabling logging all together, might work.

Mike, Any reason you don't move the shades to the Ra3 system and eliminate the Caseta all together?