开云体育

the "x" om the 8x is the cameras ID So if camera is ID 1 = \x81

Aside from the obvious ports and form factor differences are there any differences in the actual capabilities of these two processors? If you're not using the ports and doing everything over IP is

Shure P300 is only really good for very small rooms.? It's more of a usb sound card with a little bit of processing rather than a full blown Dsp.? Good for a small conference space but I wouldn't

You can also power from a PWS75 externally as a stop-gap if you need ... don't ask how I know :-) Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ Sent: Sunday, October

You can go to Amazon, get a nice MeanWell 240w 24VDC DIN power supply and power the unit via the Crestnet port. ?If the card cage is empty it will tuck right inside that space. ?If you want to get

Something I’ve been doing for years with AppleTV is to just use a generic Sony BluRay for my IR codes then going into the AppleTV settings, remotes and devices then learn remote. ?You than then

I already found this Crestron module on Upwork and it is working great.

the pro3 power supply is an off the shelf part MINT1180A2475K01.? You can buy online: https://us.rs-online.com/product/sl-power-ault-condor-/mint1180a2475k01/70151979/ Pro2 if needed:?Astec

You can power it off of the Cresnet port. Be aware that the processor with cards can require more than 75w.

Interesting, I had a project recently that used an 8x8 that we updated to the latest FW. We had an LG TV. I started out using the LX series driver from the CresDB, which I've used a number of times

FYI, I believe that you can power the P2+3 by feeding power into the Cresnet connector...I'm going off very old memory...

Well, I didn't have THAT issue... However, Earlier this week we added a new ATV to an older DM32x32 system. When sending IR out of the Endpoint, it was sending commands for about 2 sec. I really

I just noticed this the other day. I am going to try the one I have at home

Inside, no. The Pro2 has a 65w power supply that Crestron runs as a 75w. The Pro3 has a 180w power supply in it.

Will a Pro2 power supply work in a Pro3???

Tried these command sand they didn’t work. Very unusual. Only the \x01 starting commands work. Must be different commands in this camera. thank your for your help and response though

Sorry this will work

in visca serial entry in the SRGX module you need to send: Preset1: \x8x\01\04\3F\02\00\FF Preset2: \x8x\01\04\3F\02\01\FF Preset3: \x8x\01\04\3F\02\02\FF

I’ve tried the \x8x commands and none work. the commands from the module started with \x01

Yes SGRX you can send direct command in the visca input, work great !