Keyboard Shortcuts
Likes
- Crestron
- Messages
Search
|
Re: Netatmo integration
¿ªÔÆÌåÓýHi Jasen, ? in fact, i?m using v1.4 of your module. Can you point me to the 1.5 version? ? Thanks, Thorsten ? Von: [email protected] <[email protected]> Im Auftrag von jbasen ? Hi Thorsten, It has been over a year since I touched that code but I'm not aware of anything that could be causing the problem you describe.? Couple of things. 1) Are you using v1.5 of the Sensibo Air Module? 2) Please change the Debug_Msg_Output parameter to "Console".? This causes the code to write all kinds of debugging information to the text console. 3) upload the program to your processor and wait for the program to enter a steady state after all the program initialization steps have completed. 4) Open up a toolbox text console window and perform the actions to duplicate the problem. 5) Copy all the messages sent to the text console window into an email and send that to me. 6) Finally, please send me any relevant information from the error log. I've found that SimplDebugger loses lots of messages that are generated by an S# program but these are properly picked up by the text console.? Otherwise it would be simpler to simply save a log in SimplDebugger. I'll take a look and see if I can figure out what is going on. Thanks Jay On 7/15/2023 7:32 AM, Thorsten K?hler wrote:
|
|
Re: Netatmo integration
¿ªÔÆÌåÓýHi Thorsten, It has been over a year since I touched that code but I'm not aware of anything that could be causing the problem you describe.? Couple of things. 1) Are you using v1.5 of the Sensibo Air Module? 2) Please change the Debug_Msg_Output parameter to "Console".?
This causes the code to write all kinds of debugging information
to the text console. 3) upload the program to your processor and wait for the program to enter a steady state after all the program initialization steps have completed. 4) Open up a toolbox text console window and perform the actions to duplicate the problem. 5) Copy all the messages sent to the text console window into an email and send that to me. 6) Finally, please send me any relevant information from the error log. I've found that SimplDebugger loses lots of messages that are
generated by an S# program but these are properly picked up by the
text console.? Otherwise it would be simpler to simply save a log
in SimplDebugger. I'll take a look and see if I can figure out what is going on. Thanks Jay On 7/15/2023 7:32 AM, Thorsten K?hler
wrote:
|
|
Re: Netatmo integration
¿ªÔÆÌåÓýHi Jay, ? the client purchased a Sensibo device (Air) and is successfully controlling his IR-AC using the Sensibo app. I?ve also successfully integrated the Sensibo Air into the Crestron program running at the client?s CP4. Your module reports a successful connection and i?m receiving feedback (e.g. target temperature). I?m able to control the AC, setting it into cooling mode and off mode. However, after sending just a few (three) commands, the whole program shuts down and a reboot is required. In the console window, it say Program 1 stopping¡ ? Any ideas what the issue might be here? ? Thanks, Thorsten ? ? ? Von: [email protected] <[email protected]> Im Auftrag von jbasen ? Hi Thorsten, Sensibo and Ambi Climate have products that will control an AC unit.? A few years ago I wrote drivers for them.? I haven't touched them since but I believe they are both still workable drivers.? Also, I just saw an announcement that Sensibo has added some interesting new features to their product.? Hope this helps Jay On 6/13/2023 11:37 AM, Thorsten K?hler wrote:
|
|
Re: Recover programs
¿ªÔÆÌåÓýIt¡¯s still there. ? Caleb Radecky |
Manager, Online Products & Services ? From: [email protected] <[email protected]> On Behalf Of
MSTC
Sent: Thursday, July 13, 2023 18:03 To: [email protected] Subject: Re: [crestron] Recover programs ? What ever happened to Spin-Rite . . . . ? From: <[email protected]> on behalf of "thesaabdr via groups.io" <wyatt@...> ? I'm not sure what you mean by an accident.? Did you delete them, or did you run the drive over with a car?? There are free undelete programs out there and other services.? Is this a mechanical drive that won't spin up?? Put it in the freezer for a few hours, I've done that many times and recovered gigabytes of data.? There are lots of methods, depending on the scenario.? Recuva and PhotoRec are good tools.? PhotoRec will work on corrupted drives.?? |
|
Re: Recover programs
¿ªÔÆÌåÓýWhat ever happened to Spin-Rite . . . . ? From: <[email protected]> on behalf of "thesaabdr via groups.io" <wyatt@...> ? I'm not sure what you mean by an accident.? Did you delete them, or did you run the drive over with a car?? There are free undelete programs out there and other services.? Is this a mechanical drive that won't spin up?? Put it in the freezer for a few hours, I've done that many times and recovered gigabytes of data.? There are lots of methods, depending on the scenario.? Recuva and PhotoRec are good tools.? PhotoRec will work on corrupted drives.?? |
|
Re: iPhone 13, VPN and Crestron GO app
You might want to check what type of Encryption you are using for your VPN.?
When I updated the OS on my laptop, all my VPNs stopped working.? Turns out the newer OS's will no longer allow AES256-CBC. You can add some lines to your .ovpn file to allow the older AES256-CBC encryption.? But the better method is to use AES256-GCM encryption -- that is what newer OS's want to see. |
|
iPhone 13, VPN and Crestron GO app
Hi All,
I have a client with the GO app and a VPN for use when he is away from the house. With his iPhone 11 (10?) everything worked fine. Now that he updated to the 13, the GO app does not even negotiate with the processor. He has a couple other Apps (Camera and irrigation) and both of those work thru the VPN so we know that the connectivity is working. It would seem that it is something specifically between the new iPhone 13 and the Crestron GO app. We tried turning off 'Private WiFi Address' in the iOS setting but that didn't seem to help... The GO app does work locally and we don't have an 'Address 2' set up in the app. he just uses the local connection whether at home or thru the VPN. Anyone have any ideas?? TIA!! |
|
Re: Factory Defaut TS-1070
Got it to work. Pull POE, wait for Crestron logo with scrolling dots (3rd screen in boot up for me). Once saw this screen pulled POE and reapplied. Same sequence 10 more times for total of 11. Confusing part was I had to let it go past the scrolling dot screen after 11th reboot. I suspected the first screen would be factory restore but it was not.
|
|
Re: Factory Defaut TS-1070
Just did this yesterday with a tech.? Press the reset button in the pin hole on the back until the screen goes black, release.? Once you see a Crestron logo on boot, repeat 10 more times for 11 total.? Wait for it to boot and it will go into a recovery screen with a button to factory reset.? It took him a couple of tries to get it right.? Note to Crestron, this is absurdly complicated.? A 30 second hold on the reset button like every other device made is adequate.??
|
|
Re: Recover programs
I'm not sure what you mean by an accident.? Did you delete them, or did you run the drive over with a car?? There are free undelete programs out there and other services.? Is this a mechanical drive that won't spin up?? Put it in the freezer for a few hours, I've done that many times and recovered gigabytes of data.? There are lots of methods, depending on the scenario.? Recuva and PhotoRec are good tools.? PhotoRec will work on corrupted drives.??
|
|
Re: CTI-P201 Entrance Exam part 1
toggle quoted message
Show quoted text
On 12 Jul 2023, at 13:59, nicofreda via groups.io <cdandcontrol@...> wrote:
|
|
Re: CTI-P201 Entrance Exam part 1
¿ªÔÆÌåÓýWith p301 you have just a second chance to send corrections if they are on the first try.If that second try is not good, you need to wait 3 months to retake it. Not sure if its the same with 201, but I would asume that.? Nico NFH On 12 Jul 2023, at 13:47, Robert Shackelford <rshackelford76@...> wrote:
|
|
Re: CTI-P201 Entrance Exam part 1
I believe you get 2 tries to take it. Then you have to contact them to take it again. At least that's the way it was years ago when I took it. On Wed, Jul 12, 2023, 2:39 PM <derekclark@...> wrote: Hi there, this is my first post here.? I took CTI-P101 almost a year ago but only in the last couple of months or so have I had extended periods of time to look at and modify programs, and I think I'm starting to get the hang of this.? I was looking into the 201 course, but it looks like the first step is a 1 hour multiple choice exam.? I was thinking of taking it just to see if I'm anywhere near ready, but are there some sort of parameters to it?? Like if you take it once you have to wait X days to try again, or does it reflect poorly on you if you take it and get a terrible score?? I'm just curious what happens after you click "Begin Exam".? I'm not looking for answers, but details on the process. |
|
CTI-P201 Entrance Exam part 1
Hi there, this is my first post here.? I took CTI-P101 almost a year ago but only in the last couple of months or so have I had extended periods of time to look at and modify programs, and I think I'm starting to get the hang of this.? I was looking into the 201 course, but it looks like the first step is a 1 hour multiple choice exam.? I was thinking of taking it just to see if I'm anywhere near ready, but are there some sort of parameters to it?? Like if you take it once you have to wait X days to try again, or does it reflect poorly on you if you take it and get a terrible score?? I'm just curious what happens after you click "Begin Exam".? I'm not looking for answers, but details on the process.
Thanks. |
nicofreda