开云体育

Ressurecting an old thread, sorry. Yes, I understand the advantages of controlling a Crestron system via the Cisco touch 10 but how? Where is the documentation for that, adding buttons, setting up

I've added the .tio files and instructions on how to do this in a zip file here.? Just search for tst-902 or try this link:

Hear how it works. There are files supplied by Crestron that is loaded to the programmers pc that installs a WiFi definition for the TST-902.

I would also like to know the answer to this. I've only ever installed a few of these. Seems like you have to have a gateway for control, but it has built-in Wi-Fi that can't be used for control.

I just mocked this up with no issue.? You probably can't forward 443, nor should you.? Pick a random port and setup your router to forward that to 443.? Also forward 49300, as you have already.?

Yes. You can run it over WiFi. Call TB and they will help you. Files were circulating either here, or in the facebook group.

Hi guys, I have project where the touch screen is the wireless tst902 and the processor is an RMC4.Am aware that we have to have a crestron ER gateway so as to use the touch screen with this

Maybe mentioned before, but what about a recompile/upload after upgrade.

I found the command to read current routes,?DUMPDMROUTEINFO.? The output is not easy to parse but it can be done.

I'm building a remote control module to make routes on a DM using Stream Deck / Companion. https://github.com/bitfocus/companion-module-crestron-digitalmatrix/blob/main/HELP.md I'm using telnet

I am trying to figure out what type of port forwarding I need to do on the network to make Simpl Debugger work with VC-4. This is not a question on how to use SIMPL Debugger with VC-4 on a local

Turns out the device was just used by Legrand, http://67.205.146.177/books/ rs-232-dmx-engine/chapter/ command-syntax ( http://67.205.146.177/books/rs-232-dmx-engine/chapter/command-syntax ) They have

You only need the filename when there's more than one puf file in the directory.

If you see the same black cat cross your path twice in a row, it's a glitch in the Matrix, and a pretty good sign you're running in virtual. Sorry.. there's a GetModelNumber() function in SIMPL+ that

https://www.enttec.com/product/din/ethernet-to-dmx-rdm-adapter/ I have used this product to directly convert sACN to dmx for control of simple dmx fixtures LED color changing soffits etc.--if it's

Interesting, Alex!... I'll try this. Though when I do an update, I always use 'puf cp3_1.8001.0214.puf all' command, which I *Assumed* was the same. I'll try it tonite an update the post... Also FYI,

I just updated an AP3 to 1.8x yesterday. This unit was previously on 1.504 which was our "go-to" stable version before some of the certificates went out of date. I always use "puf all" when I update

Has anyone controlled DMX from Crestron using this piece?? I have 4 DMX lighting fixtures I want to give controls for on a touch panel, namely brightness and color temperature.? I am reaching out to

Is there a console command for changing a CRESNET device Serial Number? Thanks.

Its been a while since i've used the Horizon HZ-KPEX or HZ-KPCN, but if you have issues with the keypads flashing, here are my notes on what the different flash codes are: Turns on for 5 seconds = The