开云体育

Check the camera stream to make sure it is set to H.264 and NOT H.265. I have seen a few devices (Speco, ICR) that when they are rebooted they revert the stream back to H.265 braking the stream- its

They definitely slow down pages a bit even on xx60 series panels and are sometimes slow to populate on new panels as well. But they are a great tool and generally once they load they work well

Aside from when the service has outages, it works pretty well. Its fine on 310s but we have alot of jobs with 302s and it will not fit on there correctly. Which sicks as on those we are using V1

Ok, need to change my plea hear.? Can someone please direct me to a document that provides a procedure for tying a unifi camera to crestron home?

Comment that sh*t out.

Hi, I have a Crestron system with a TSW762 & a Android Tablet running the Crestron App. WE have been running the Crestron Embedded Video Smart Object in both to view the? RTSP stream from their PTZ

beware of scrolling direction because you can't put objects in an SRL that move in the same direction.

So it looks like you're converting from a string to short. Depends on what the data string looks like.. Try these: //data is some characters representing a hex value try { data = "FF" int i =

Hello Jeremy would you know of a good resource to better understand data type conversions from SIMPL# to SIMPL+? I have reviewed the Microsoft docs but I am still having issues understanding.

Got it to work with the Crestron One iPad app.? Making progress.? For those learning like me, go into the ipad setup and locate the Crestron One app, turn on HTML5 UI Mode.? Go back to the app and

I don't think so, I have checked room setttings and it is checked and I have check menu items and cameras is checked in there too. Right now on the configuration for the Camera, I have cut and pasted

I'm not following your code completely, but the second parameter of Convert.ToInt16 is the base - default is 10, decimal. Base 16 would be hexadecimal, and I don't know of anything that uses base 32.

It's safe to ignore, or you can comment out the USB slot on any program running in slot 2+.

Also, if one of those supplies fails, the other will either go into current limiting or if poorly designed then let out the blue smoke with possible 'orrible consequences.

Hi all, Looks like its been about a year since the TV Presets v2 has been discussed. How is it working for others? I know that there was some discussion about the sizing/formatting - has this been

It's more of a NEC code thing.? I believe the maximum power delivered by low voltage Class 2 wiring is 100VA -- that would be about 4A at 24VDC.? Considering most power supplies will actually

Hi all, *** I thought I start a little series about various tools to gauge the latest success/problems with some items... I have specifically not used the SRL because for years (long ago!...) it had

Hi All, I've seen this 'error' on a number of projects after program restarts and reboots, definitely with 3-series (can't confirm with 4-series), If I have 2+ programs running. *Error:

Theoretically yes, practically no. Do NOT connect power supplies in parallel unless the power supply is designed and specified for being connected in parallel! It has been a while, but I have seen

Also, additional power supplies up’s the amperage – which means bigger wire guage to devices and the components internal circuitry needs to be beefed up to handle the possible larger amperage