Re: Log Entry, continuous and inexplicable
Okay, I will take a stab at your question. First off, it is just an "info" entry so it doesn't? necessarily mean anything that is important.? Personally, I wish Crestron would give us a way to turn
By
Steve Kuehn
·
#241761
·
|
Re: CP4 versiports "locking up"
My CP4 has also started losing it's IOs. I haven't tried many firmwares but did load a new one and new SIMPL when the issue first popped up. Didn't seem to help. Also running only one program.
By
Jason Melvin
·
#241760
·
|
Re: CP4 versiports "locking up"
We are also just running 1 prog on the CP4 but using all 8 gpio¡¯s for simple zero contact sensors ip¡¯s. We find exactly the same issue that they all lock up and the only way to re-instate them is
By
Miles Redbart
·
#241759
·
|
Re: NVX 360C and AM-200
I've had similar issues but with E30s and D30s and found that I had to manually set hdcp in the devices.? The auto option was flakey.? Ever since I have been setting hdcp manual, I haven't seen the
By
Bambam_101
·
#241758
·
|
Log Entry, continuous and inexplicable
Hi All, Anyone have a clue as to what this log entry is about?? I may have posted this before, but I periodically see it in the logs. This time It was repeated every minute for multiple days!!!...:(
By
ckangis
·
#241757
·
|
Re: Crosspoint ECCON on 4-Series
More years ago than I can count I started driving operations in my programs with serial strings.? When the user selects to watch a source a serial string is generated and that drives all the xpoint
By
jbasen
·
#241756
·
|
Re: Crosspoint ECCON on 4-Series
Thanks Lincoln, I¡¯ll give the SAWPULSE with 5d a try. So far I only have 3 ECCONNECT in the project for some handheld remotes. Once I reprogram the audio for NAX and video for NVX I will redo the
By
Ryan Cunningham
·
#241755
·
|
Re: Crosspoint ECCON on 4-Series
As (one of the) the originators of the SAWPULSE / SMV technique my house would be very broken if the behavior changed on the 4-series ¨C my house has been running on a PRO4 since beta and that logic
By
Lincoln King-Cliby
·
#241754
·
|
Re: Crosspoint ECCON on 4-Series
Sorry, I proofread my post but I guess I was tired and I typed it incorrectly. OUT is tied to Disc_From_E, OUT* is tied to CONNECT. I tried 1D, .5s, 1s, with no change. Ryan Cunningham
By
Ryan Cunningham
·
#241753
·
|
Re: Ubiquiti wifi extender
#bestpractices
I cannot speak for all models of APs, but I have several installations with a UAP-AC-PRO with just a power injector to power it.? You can use either the LAN input to the power injector or the
By
Steve Kuehn
·
#241752
·
|
Re: Ubiquiti wifi extender
#bestpractices
So only supply power to access point since there isn't any wires at that location and configure as wireless unlink. Wouldn't this require using a Pro series AP since it has Main and Local network
By
Brad Wykoff
·
#241751
·
|
Re: Crosspoint ECCON on 4-Series
The XPoint connection logic isn't *timing* critical - we use the analog serial logic wave one-shot to make/break the connection - it's all done in two consecutive logic waves, and it's been 100%
By
Oliver Hall
·
#241750
·
|
Re: NVX 360C and AM-200
That sounds like a HDCP issue. Does the projector support HDCP2.2?? How is HDCP configured on the AM-200s and NVX? Have you tried if you get the the signal on the HDMI output of the card?
By
dblpnt
·
#241749
·
|
Re: Simpl# Debugging 4-Series
Use lots of print statements.
By
Daniel Portugal
·
#241748
·
|
Re: Crosspoint ECCON on 4-Series
The out* is connected to disc_from_e. That means that is momentarily connected but the normal state would be disconnected. Probably this momentary connection is happening too fast and the resolution
By
Daniel Portugal
·
#241747
·
|
NVX 360C and AM-200
I have an open ticket with Crestron about this already, but was hoping someone here has worked through this. I have 9 NVX 360C and 9 AM 200 that are all behaving almost the same. The AM 200 are
By
Jason H
·
#241746
·
|
Re: crestron.com online help issue
Anyone heard whether they're going to fix this soon??? it's a PITA...
By
ckangis
·
#241745
·
|
Re: TRANE XL1050 WiFi Thermostats
Thanks Jeff for the response - I have confirmed with TB regarding this (another hour wasted on the phone) Such a Digital Age bummer! I love when I go to finish a project and find that I can't finish
By
ckangis
·
#241744
·
|
Bose SoundTouch and LifeStyle drivers for Crestron Home OS3?
#crestron
Hello Guys, I'm looking for a Bose SoundTouch/LifeStyle driver for Crestron Home OS3, something like the JanusTech ones for SIMPL (which work extremely well btw) but compatible with CH. Thanks.
By
David Chramcow
·
#241743
·
|
Re: Time on TSW-x70 with 4-series processor
Thanks for the response! However, my question is primarily about any differences from older setups. The x60-series panels also had their own time settings BUT with 3-series processors, I never had to
By
ckangis
·
#241742
·
|