开云体育

Race between allayou and Crestron tech support. I'd *assume* this was the case, but wouldn't mind confirmation... Have this camera, and curious if anyone has controlled it with the SRG-300SE module

I haven't encountered the issue, but have seen others discuss something similar when using CEC to control a Sony TV, on a different forum. The solution there was to change inputs before sending the

"I can only assume it uses a proprietary command set beyond the required power off" Any chance it's just shutting down the CEC "listener" when it's powered off? Is there a "deep sleep" setting buried

I have tried all the IR commands that I could find I can turn it off with CEC, but can't turn it on with any of the commands in the Crestron CEC Display module I did add a 3rd power on command to the

The linear actuator is now sold. Thanks

Hallo, i have the same Problem with the modul. The Modul 1.3 dosn`t work also. The Problem is in the Simpl Plus Modul in this macro. Both moduls don`t work about a longer time. You must send only the

I should also mention that a linear actuator doesn't have to be used in the way I envisioned using it. There are lots of other projects you can tackle with a linear actuator. I recently saw a device

Thanks for your interest. I don't believe someone could force the window against the linear actuator. These things are pretty powerful and the chain drive that comes out of them is very heavy duty. I

My latest blog post, “Does an Energy Monitor Really Add Value to a Smart Home?” is being published by the good folks at Residential Tech Today Magazine on their web site. You can find the full

That looks like a lot of fun. I have a question about security. Since you have to leave the window unlocked, does the Linear Actuator prevent someone from opening the window? Does the motor stop

For those that enjoy tinkering and experimenting I’m selling a complete system I built to open/close a window in a home. I was designing a system for my own home where, if the outside temperature

Dear members, anyone has integrated with Lunatone lighting control ? thank you

I thought I replied to this thread but I'm not sure it made it through. Hosted on my github is a complete Crestron to SmartThings integration solution (control and feedback) that allows you to use

Seems a strange oversight that Vera module doesn't appear to have door lock capability? Z-wave door locks are abundant and less expensive than the Zigbee native versions.

I'm in the same boat. New house, new needs, and shopping for hubs. I was thinking of using the Samsung SmartThings unit as a somewhat brand agnostic 'bridge' to connect it all, but haven't integrated

have Fire Stick 4K & AppleTV gen 4 output 1 is Denon AVR->TV output 2 is TV output 3 is HD-SCALAR->TV I realize the DMPS is only 1080P, but that is OK I get audio for a while, but it seems that if the

Hi, I’m using Vera Lite and the Vera module at marketplace to control my z-wave equipment I have at home – works perfect. //S Fr?n: Crestron@... <Crestron@...> Skickat:

Jeremy, you may be right, and my memory was not accurate. If what you say is true, then really, the only reason to define the signals that the OP asked about would be if you need to restart a slot

You're probably thinking of the "Program initialization complete" signal, which you can define if you want the processor to wait to start the next program for your cue. If you don't define it, or it

I never add a signal, unless you are doing something where you want to stagger the startups or something due to something you are doing in Slot1 for example, reading a config file and then starting up