开云体育

Hello, I am trying to communicate with this receiver via IP. I've set up the port number and IP address on the receiver and placed a TCP client in my program. I am using the IP module for the Yamaha

Don't think this is correct. EISC definitely uses UDP. We are using Wireshark and CISCO Capture to debug some performance issues and all EISC communications we have seen is using UDP packets. All

Oh I have.. but only like twice. Didn't pick up on the 6-handed quote. Please don't tell my wife!

Yes, the subscription-less Pandora accounts get paused after some period of time w/out activity. You'll need to do some kind of interaction with the stream at least every hour or so, or upgrade to P1.

No Ethernet on those projectors? - Chip

The other option being an input card and TX w/USB on it... We have a job where a DVI input card (taking video from a source that didn't require the USB) was supposed to accept a keyboard/mouse combo

The data sheet implies it is: "Basic API available over IP (Telnet or Secure Shell Protocol [SSH]) " [Non-text portions of this message have been removed]

I know this is late but...I just ran into this same issue today and changed the button style from 3D to 2D and everything ran smoothly after that.

Any suggestions on a new install the friendliest automation-ready garage door opener? Looking for the kind that operates on simple contact closure switch. Separate magnetic sensors will be used for

Dumb Question, but does nayone know if the Cisco Tandberg SX20 is controllable with the Crestrons?

I just received my first ATC-AUDIONET card and immediately upgraded to support the new Pandora features. I've left it playing in the office almost all day, and I have noticed that it just stops

Sharp used to be pretty good, but I ran into a unit the other day that I could not find discrete for either. It was the LC-32SV29U. On most standard sharp codes I found, input 2 would send a freeze

If you are using crosspoints to connect a panel to a zone you must be initializing an analog value for the zone you want the panel to connect to when you press that "Kitchen" button. Look at using the

Hi, I am looking for discrete ir (crestron-codes) for Sharp. ? ? Shan

I think you may be right there and I was backwards originally. Just looked at netstat with Xpanel running on my desk here at the office (connected to my processors at home) and it looks like that is

I don't know the reasons behind it, but whenever I've tried to port forward using TCP only, it never worked until I selected "both".

Lincoln, wouldn't the loopback address be used when a CIP device is connecting back to the processor, and an IP/Hostname is used when the processor is reaching out to the remote device? I don't

I'm a little foggy on it since it was covered rather quickly at a Masters but I thought it was mentioned that anything that uses 127.0.0.1 in its IP table entry (touchpanels and the like) is UDP while

I don't know what you have access to but there is a set of modules on Crestron's US site called Siedle DCOEM that really helped me out. I believe they are originally from Belgium( which is where I got

Let's say "I've been there and done that" and had the confused look on your face too. Except, this was after Crestron design engineers designed a system incorrectly, twice actually. The first time