I've done probably 20 by now
Yes.
When you upload with the config it pops up on the display "do you want to? allow the remote change" (like plugging your phone into a pc). TB said you can't get around this.
Took me forever to find the "Code" to enter advanced setup from the device. For months I thought you could only use the Config tool.
Of course it works with C-Home like it was made for it.
Simpl programming doesn't like single setpoints, I just always shown heat & cool setpoints to avoid issues.
My (2) biggest problem lately is...
? ? ?These TStats requires twisted pair to be ran to Crestrons remote sensors, with distance longer than 15'.? We run that now, but not before or during first install.? To be able to use remote sensors on non-twisted you have to use 3rd-party 10K ohm themomisteors (AprilAir works great).
? ? ?These TStats require to be set inside the wall (not designed for surface mount).? In mech rooms we've used surface mounted back boxes, but not in the field.? When replacing failing CHV-TStats (happening more, and more often) the are usually stubbed out of a plywood or 2x4 backing.
In short... I'm still waiting to be impressed.
CO Cowboy