¿ªÔÆÌåÓýHi Jay, ? Happy New Year! ? Unfortunately, the Shelly 1 + Add-On combo doesn¡¯t seem to support sensor reporting via URL. There?s no ¡°Report Sensor Values" option. The Shelly H&T Sensor isn?t an option IMHO since I prefer to have invisible sensors with no maintenance. The H&T is another ¡°thingy¡± standing around needing support from time to time replacing batteries (even if it?s just once a year). ? So I?ll approach Allterco and ask them if it?s possible to add the sensor reporting to the Add-On/1/1PM. ? Cheers, Thorsten ? Von: [email protected] <[email protected]> Im Auftrag von jbasen ? Hi Thorsten, First, the Humidity-Temperature Sensor v1 module is for the Shelly Humidity-Temperature sensor.? I'm not sure that I ever tested that with a sensor connected to a Shelly 1/Shelly 1PM.? I'm trying to reproduce your setup to see if I can make it work.? Unfortunately, the temperature sensor adapter I have for the Shelly 1 and Shelly 1PM appears to have a problem.? As soon as I plug it into a Shelly device it crashes it.? When I view the built in web page for the Shelly Humidity-Temperature Sensor there are 2 sections for URL actions.? The first is Sensor URL actions.? This is where the entries for over temp/under temp and over humidity/under humidity are located.? However, there is also a section called actions.? Under the actions section is where "Report Sensor Values" url action is located that is needed to report temperature and humidity updates to a Crestron processor. If this isn't included with the Shelly 1/Shelly 1PM then I'm sorry there isn't a way, without writing additional HTTP code to poll those values, to make it work for you.? The Shelly H&T Sensor is under $30 so that may be the easiest path. Hope this helps Jay ? On 12/31/2021 10:44 AM, Thorsten K?hler wrote:
|