jbasen: Shelly temp/humidity sensors
Hi Jay, ? i?m just testing with the Shelly Add-on board and an attached temperature and humidity sensor. The Add-On board is attached to a Shelly1. Sensors are recognized by the Shelly1 and working ¨C temperate and humidity is reported on the Shelly?s web-interface. Now i?d like to integrate these values into my Crestron system. I?m using the latest v8 package of your Shelly modules. ? In the help for the ¡°Humidity-Temperature Sensor v1¡± module, it says: ¡°For the module to properly refect the feedback the following fields of the Shelly I/O URL Actions must be set: 1) Humidity-Temperature Sensor Report Sensor Values URL This field should be set as follows where Processor_IP and Processor_Port must match what is set in the Shelly Comm Manager module.? ? ¡± ? The problem is, that I don?t have a ¡°Humidity-Temperature Sensor Report Sensor Values URL¡± setting under ¡°Shelly I/O URL Actions¡±. I do have the described over and under events, but nothing for the actual readings for temp. and humid. ? Shelly firmware is the latest (updated today). ? Any idea? ? Cheers and a Happy New Year to all on the list! Thorsten ?
|