Tony is right. It also resets based on the processor time so if your time is not set right in the processor it could reset earlier or later.
toggle quoted message
Show quoted text
--- In Crestron@..., "Tony Golden" <mrgolden@...> wrote:
FYI, the latest TPMC-3X firmware Release Notes states the panel will perform a
"maintenance mode" (i.e., reboot) at 2 AM every day, if it's not in use at the
time. Although it's not mentioned in the MTX-3's Release Notes, I'd be
surprised if the same didn't apply.
--- on Tuesday, December 25, 2012 at 6:03 PM, LENREX wrote:
I'm wondering if this is Prodigy processor specific only? Or if MC3's do it
too? Or if it's purely a PTX-3 & MTX-3 hardware issue where the remote gets
it's time from the processor somehow and reboots itself. I've tried
changing the time on the processor and or adding clock drivers in SIMPL yet
no difference. Still reboots at @ 11pm PST EVERY night.
I personally have a PMC3 & PTX3. I have a client with 2) PMC3-XP's &
MTX3's. And I know another dealer that has PMC3 & PTX3 rebooting issues as
well.
My Pro2>Cenrfgwex>MTX3 clients either haven't noticed this issue and
haven't told me, or they don't have this problem...?
--- In Crestron@..., "Block-O-Matic" <michael@> wrote:
A PMC-2+ and ptx-3
--- In Crestron@..., "LENREX" <lenrex@> wrote:
What processor/remote do you have?
--- In Crestron@..., "Block-O-Matic" <michael@> wrote:
Yes, that happened. It will again tonight.
mb
--- In Crestron@..., "LENREX" <lenrex@> wrote:
Has anybody seen their MTX-3 or PTX-3 reboot late at night? Around
11pm PST or 2am EST?
