What is the response you're seeing in Debugger?
Are you sure the username/password in the module match the CODEC or that authentication has been disabled for the serial port?
I've used that module with C40s, C60s, and C90s without issues.
--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
V: 440.449.1100 x1107 | F: 440.449.1106 | I:
Crestron Authorized Independent Programmer
toggle quoted message
Show quoted text
-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of techybabble
Sent: Friday, September 14, 2012 11:45 AM
To: Crestron@...
Subject: [Crestron] Tandberg C40 Module Help
I've happing trouble getting the Crestron module working, the one from the crestron site. It is the Tandberg C90 + C60 Serial v1.3 PRO2 Demo.
According to the Tandberg site is should work with the C40 as well.
I have communication with the box, but even simple things such as IR emulation commands don't respond.
Is there some secret to using these modules. I REALLY need the phonebook directory portion of the module.
All help is appreciated.
thanks
------------------------------------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links