If the remotes work fine when the power is disconnected from the lights I would make sure that you dont have a dimmer with the same ID as one of the remotes then I would kill the dimmers one at a time to determine when the remotes start to work fine. It is not a problem having them on the same gateway. Until you get to the bottom of whats going on even moving the remotes to a different gateway your probably going to have the same problem.
GC
toggle quoted message
Show quoted text
--- In Crestron@..., "eddie" <eddiermiranda@...> wrote:
I have two MTX-3s that will not function correctly. The remotes hangup and lag horribly. It will take up to 5 seconds to send an IR command. They are on a gateway with 7 InfinetEX lights. If I disconnect power to the lights, the remotes work fine.
Any tips?
I have already tried changing channels and swapping remotes.
