开云体育

开云体育

I am still looking for wheel cylinder rebuilding kits for my 1980
comutacar too!
Lou Cavaluzzi

Have you tried NU-CAR?


--- ka2pfl <ka2pfl@...> wrote:

I am still looking for wheel cylinder rebuilding kits for my 1980
comutacar too!
Lou Cavaluzzi

__________________________________________________
Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!

Are you serious about selling your car? What would you be looking for? $$$?

Thanks,

Bob in Vermont
--- Buddy Pigg <coolinout@...> wrote:

STEVE, IF YOU FIND ANY PARTS ,LET ME KNOW. I TOO, AM HAVING BRAKE
PROBLEMS WITH MY VANGUARD COMMUTACAR. OR MAYBE SOMEONE MAY WANT TO BUY MY
CAR AND USE FOR PARTS. BUDDY PIGG FROM
N.C. coolinout@...










----- Original Message -----
From: Steve Evans
To: C-Car@...
Sent: Saturday, March 09, 2002 6:52 PM
Subject: [C-Car] CitiCar Brakes


I know it has probably been asked a thousand times. I need drum brake
parts... 1976 Citicar linings, dirt cover, drums, etc. Does anyone know
part numbers and / or availability? Also, axle bearings and covers for a
Dana Model 18 Axle. Thanks.

Steve Evans
Crete, NE 68333

Yahoo! Groups Sponsor
ADVERTISEMENT




To unsubscribe from this group, send an email to:
C-Car-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

__________________________________________________
Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!

Yes Bob, They are still looking (it has been over 2 weeks now with at
least 5 phone calls). I think they are changing owners or something. My
needs don't seem to be a big priority. They have always been very helpful
in the past. Really miss my CitiCar as it is my main means of
transportation.
Thanks!

Steve Evans
Crete, NE

If the cylinders use cups, rather than donut style sealing rubbers, then you
can usually find them at a old style, well-stocked parts store. Hone out the
cylinders first, then check the bore with an inside mic. and get the correct
size cups for that bore. If the pistons are frozen or corroded into the
cylinders, try removing the line flare nuts or bleed screws, and replacing them
grease fittings of the same thread size. Thread a heavy duty "c" clamp to
retain the pistons (loosely, to give them room to move) and pump away with a
grease gun on the fitting. Keep loosening the clamp as the piston(s) emerge,
and after you have one of them out, insert an appropriate hardwood dowel drift
through the cylinder, and knock the other one out. See if the old rubbers
don't have a mfgr. name embossed on them somewhere, and try writing direct.

I have also thought that a A.H. Sprite or MG Midget or Mini backing plate
and/or drum could be adapted by a machine shop.


--- Steve Evans <sevans1@...> wrote:

Yes Bob, They are still looking (it has been over 2 weeks now with at
least 5 phone calls). I think they are changing owners or something. My
needs don't seem to be a big priority. They have always been very helpful
in the past. Really miss my CitiCar as it is my main means of
transportation.
Thanks!

Steve Evans
Crete, NE

----- Original Message -----
From: "Bob Atchinson" <bobat2@...>
To: <C-Car@...>
Sent: Monday, March 11, 2002 5:37 PM
Subject: Re: [C-Car] Re: CitiCar Brakes

Have you tried NU-CAR?


--- ka2pfl <ka2pfl@...> wrote:

I am still looking for wheel cylinder rebuilding kits for my 1980
comutacar too!
Lou Cavaluzzi

__________________________________________________
Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!



To unsubscribe from this group, send an email to:
C-Car-unsubscribe@...



Your use of Yahoo! Groups is subject to

__________________________________________________
Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!