开云体育

QtTermTCP v0.0.0.54

Teun Blok All Messages By This Member #35477 This version (QtTermTCP 54) compiles from source and runs ok on gentoo linux. I have KISS in the setup menu but when I select AGW, I can not connect to a station because the connect menu is gray and with this situation I can not enter a callsign in the next window as in version 52. In bottom right is mentioned AGW connected. Am I doing something wrong? TIA Teun PA1TB
John G8BPQ All Messages By This Member #35480 Are you running in Single Terminal Mode? If so it looks like the window is being allocated as the AGW monitor window, so connect is disabled. I'll look into it, but in the meantime if you enable Tabbed mode it should work, with the AGW monitor being allocated to the 8th tab and you can use the first for connections. 73, John toggle quoted message Show quoted text On 06/07/2022 18:40, Teun Blok wrote: This version (QtTermTCP 54) compiles from source and runs ok on gentoo linux. I have KISS in the setup menu but when I select AGW, I can not connect to a station because the connect menu is gray and with this situation I can not enter a callsign in the next window as in version 52. In bottom right is mentioned AGW connected. Am I doing something wrong? TIA Teun PA1TB
Teun Blok All Messages By This Member #35482 John, Solved! I was running in the Single Window (Term + Mon) mode. When I use the Tabbed mode, it works. In the Single Window (Term only) mode it works also ok. Only Single Window (Term + Mon) mode gives a grey Menu Connect. Thanks for the answer. 73 Teun

Previous Topic Next Topic