开云体育

PTCIIpro 2 port aprs

claude F4IKH All Messages By This Member #36493 Hi I have a PTCII-pro controller with 2 DSP module. I would like to use port 1 on aprs hf and port 2 on aprs vhf. I installed bpq on an old raspberry 1B and it works very well I configured linbpq with a port DRIVER=SCSPactor The beacon are sent to the first port but nothing to the second Can it work? What do I need to add in the port configuration section? and in the aprs configuration section to send beacon on second port? tNX claude ?
claude F4IKH All Messages By This Member #36617 hello no solution to use the second port on vhf with bpq? my port section in bpq32.cfg PORT ?Portnum=1 ?ID=Pactor Link ?COMPORT=/dev/ttyUSB0;??????????? COM Port Address ?SPEED=115200;???????? COM Port Speed ?QUALITY=0?????????????? ;diable node brodcast ?UNPROTO=BEACON,WIDE1-1 ? ?DRIVER=SCSPactor ?CONFIG???????????????? ; Driver-Specific Configuration ? APPL BBS?????????????? ; Autoconnect to BPQ32 RMS Application ? ?PSKA 140?????????????? ; PSK TX Output level. ?FSKA 100?????????????? ; TX Level for FSK modes. ?TRX TYPE ICOM 1200 04? ; Icom control ?RIGCONTROL PTCPORT 1200 ICOM IC735 04 ?# If you wish to use any packet ports, you will need to set suitable ax.25 param, for example: ?PACKETCHANNELS 10????? ; Enable Packet Ports ?PAC B 1:300 ?PAC B 2:1200 ?PAC TXD 1:250 ?PAC MON 6 ENDPORT tnx 73 F4IKH
claude F4IKH All Messages By This Member #36618 I have found a solution to connect on vhf port using C 1 2:CALL work on terminal and forward now need to found how to send becon to the vhf port in web app testing beacon with 2:CQ in destination work but how to set this in bpq32.cfg? thank claude
John G8BPQ All Messages By This Member #36620 开云体育 That can't be done. It would need a program change. 73, John On 08/12/2022 11:23, claude F4IKH wrote: toggle quoted message Show quoted text I have found a solution to connect on vhf port using C 1 2:CALL work on terminal and forward now need to found how to send becon to the vhf port in web app testing beacon with 2:CQ in destination work but how to set this in bpq32.cfg? thank claude
claude F4IKH All Messages By This Member #36623 Thank for answer John toggle quoted message Show quoted text Le jeu. 8 déc. 2022 à 13:40, John G8BPQ <john.wiseman@...> a écrit?: That can't be done. It would need a program change. 73, John On 08/12/2022 11:23, claude F4IKH wrote: I have found a solution to connect on vhf port using C 1 2:CALL work on terminal and forward now need to found how to send becon to the vhf port in web app testing beacon with 2:CQ in destination work but how to set this in bpq32.cfg? thank claude
David VK2NA All Messages By This Member #43093 Hi, ? Thanks for the post.? This config works for me BUT when I send unproto beacons to the port (setup in the web browser) the PTC reboots.? ?However, C 3 CALLSIGN works fine.?? ? It's a shame it doesn't like to UNPROTO.? ? ? Cheers, Dave

Previous Topic Next Topic